Raffel Systems 4-Button Power Touch Sensor User Manual

Indledning

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Raffel Systems 4-Button Power Touch Sensor. This product is designed as a replacement part for compatible powered recliners, controlling both recline and headrest functions. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Sikkerhedsoplysninger

Handle the touch sensor and associated wiring with care during assembly and installation.
Avoid exposure to liquids and extreme temperatures, as this can damage the electronic components.
Always follow all assembly and installation instructions carefully to prevent injury or damage to the product or furniture.
Ensure all power is disconnected from the recliner before attempting any installation or repair.

Produkt overview

The Raffel Systems 4-Button Power Touch Sensor is an internal control component for powered recliners. It facilitates the control of both the recline and headrest motors. This sensor is designed to be sensitive to soft touch inputs.

Nøglefunktioner:

Controls both headrest and recliner motors.
Premium touch sensors for responsive operation.
Compatible with ManWah and other touch-style recliners.

Vigtig bemærkning: This product includes the touch sensor internals only. It gør ikke include the 4 physical buttons or the mounting plate, which are sold separately.

Raffel Systems 4-Button Power Touch Sensor with all components

Figur 1: Overview of the Raffel Systems 4-Button Power Touch Sensor, showing the main control board, sensor leads, and connectors.

Close-up of the touch sensor leads with labels

Figur 2: Detaljeret view of the individual touch sensor leads. Each lead is labeled for correct connection to the corresponding button (e.g., "OPEN", "CLOSE").

Close-up of the 5-pin motor connector and 2-prong headrest connector

Figure 3: Close-up of the main 5-pin connector for the recliner motor and the 2-prong connector for the headrest motor. Labels indicate their respective functions.

Installationsvejledning

This touch sensor is designed as a replacement part. Ensure your recliner is compatible with a 4-button touch sensor system before proceeding.

Afbryd strømmen: Unplug the recliner from the wall outlet to ensure no power is supplied to the system.
Access Existing Control Board: Locate the existing touch sensor control board within your recliner. This may require accessing the underside or interior of the furniture.
Frakobl den gamle sensor: Carefully unplug the wire harness from the existing control board. Note the connections, especially the main 5-pin connector for the recliner motor and the 2-prong connector for the headrest motor. Also, disconnect the individual sensor leads from the buttons.
Installer ny sensor:
- Connect the new touch sensor control board.
- Connect the main 5-pin connector from your recliner's motor to the corresponding port on the new sensor board.
- Connect the 2-prong power cable from your chair's headrest to the appropriate port.
- Connect the individual sensor leads (labeled "OPEN", "CLOSE", etc.) to your existing 4 buttons. Ensure each lead is connected to its correct button function.
- Ensure all wires and connectors are securely fastened and labeled appropriately.
Sikre komponenter: Position the new sensor board and wiring securely within the recliner, ensuring no wires are pinched or exposed to moving parts.
Test funktionalitet: Once all connections are made and secured, plug the recliner back into the wall outlet and test all 4 button functions (recline open/close, headrest open/close) to ensure proper operation.

Operation

The Raffel Systems 4-Button Power Touch Sensor operates in conjunction with your recliner's existing 4 physical buttons (sold separately). These buttons, when connected to the sensor, allow for intuitive control of your recliner's functions.

Recline Control: Use the designated recline buttons to extend or retract the footrest and recline the backrest.
Headrest Control: Use the designated headrest buttons to adjust the position of the headrest.
The touch sensors are designed to be highly sensitive, requiring only a soft touch for activation.

Opretholdelse

To ensure the longevity and proper functioning of your touch sensor, follow these maintenance guidelines:

Rensning: Keep the area around the sensor and buttons clean and free of dust or debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on the sensor or wiring.
Miljøforhold: Avoid exposing the sensor to excessive moisture, humidity, or extreme temperatures.
Kabelintegritet: Periodically inspect all connected cables for any signs of wear, fraying, or damage. Ensure they are not pinched or under undue stress.

Fejlfinding

If you encounter issues with your Raffel Systems 4-Button Power Touch Sensor, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Recliner or headrest does not respond to button presses.	Strøm afbrudt. Løs eller forkert ledningsforbindelse. Damaged sensor lead or button. Faulty motor or power supply (less common for new sensor).	Sørg for, at lænestolen er tilsluttet, og at stikkontakten fungerer. Check all connections, especially the 5-pin motor connector and 2-prong headrest connector, and individual sensor leads. Ensure they are fully seated and correctly matched to labels. Inspect sensor leads for breaks or damage. If a specific button doesn't work, the corresponding lead might be compromised and may need re-splicing or replacement. If the issue persists after checking connections, consult a qualified technician.
Recliner does not fully open or close.	Partial connection or wire issue. Motor obstruction or mechanical issue.	Verify all sensor leads and main power connections are secure. Check for any physical obstructions preventing full movement of the recliner mechanism.
Sensor or wires become excessively hot.	Short circuit or incorrect wiring. Overload on the system.	Immediately disconnect power from the recliner. Re-check all wiring connections for correctness and ensure no bare wires are touching. If the issue persists, the sensor may be faulty, or there's an issue with the recliner's motor or power supply. Seek professional assistance.
Incorrect connector type for slave motor.	Compatibility issue with specific recliner model.	While this sensor typically uses standard connectors, some recliner models may vary. If the slave motor connection is incorrect (e.g., 2-prong instead of 5-pin), professional modification (e.g., re-splicing) may be required. This should only be attempted by a qualified individual.

Specifikationer

Mærke	Raffel systemer
Modelnavn	TOUCH006
UPC	753577025111
Farve	Sort
Speciel funktion	Touch-Sensitive Controls, Ergonomic
Anbefalet brug	Replacing broken or missing touch sensor controls in powered recliners
Antal enheder	1.0 tæller
Varens vægt	7.4 ounce
Produktdimensioner	95 x 3 x 3 inches (approximate, refers to cable length)
Fabrikant	Raffel systemer
Tilbagelænet Position Tæl	2 (for recline and headrest)

Garantioplysninger

Specific warranty details for the Raffel Systems 4-Button Power Touch Sensor are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact Raffel Systems directly through their official webwebsted eller kundeservicekanaler.

Kundesupport

If you require further assistance, have questions not covered in this manual, or need to report an issue, please contact the manufacturer, Raffel Systems. Contact information can typically be found on the product packaging or their official company webwebsted.

Please have your product model number (TOUCH006) and purchase details ready when contacting support.

	Kopholder med berøringssensor og oplyst kopholder med elektrisk lænefunktion og elektrisk hovedstøtte: Brugs- og fejlfindingsvejledning Omfattende vejledning til betjening og fejlfinding af Raffel Systems Touch Sensor-kopholderen med oplysning, inklusive elektrisk lænefunktion og elektrisk hovedstøtte. Indeholder opsætningsvejledning, tips til brugerbetjening, tilslutningstjek, komponentidentifikation, trin til udskiftning af inline-forbindelser og en detaljeret fejlfindingstabel.
	Raffel Systems ACC GWC 01 trådløs oplader brugermanual og specifikationer Brugermanual og tekniske specifikationer for Raffel Systems ACC GWC 01 trådløs oplader. Indeholder sikkerhedsforanstaltninger, opladningsinstruktioner, produktoplysninger og FCC-overholdelsesoplysninger.
	Raffel Systems BP512 batteripakke til bevægelsesmøbler brugermanual og sikkerhedsvejledning Omfattende vejledning til Raffel Systems BP512 batteripakken, inklusive vigtige sikkerhedsinstruktioner, detaljer om et års begrænset garanti, drift i dvaletilstand, opladningsprocedurer, installation og fejlfinding for bevægelsesmøbler.
	Raffel Systems BP512 Batteripakke til Motion Furniture Brugermanual Omfattende brugermanual til Raffel Systems BP512-batteripakken, der dækker sikkerhedsinstruktioner, garantioplysninger, installation, opladning og fejlfinding for bevægelsesmøbler som lænestole og elevatorstole.
	Raffel Systems BP536 Batteripakke til Motion Furniture Brugervejledning Omfattende brugervejledning til Raffel Systems BP536 batteripakken, med detaljerede sikkerhedsinstruktioner, garantioplysninger, installation, betjening og fejlfinding af bevægelsesmøbler.
	Raffel Systems BP536 Batteripakke til Motion Furniture - Brugermanual og installationsvejledning Omfattende vejledning til Raffel Systems BP536 batteripakken, inklusive sikkerhedsinstruktioner, installationstrin, opladningsprocedurer, LED-indikatorer, dvaletilstand og fejlfinding for bevægelsesmøbler og justerbare senge.

Raffel Systems TOUCH006

Brugermanual

Raffel Systems 4-Button Power Touch Sensor for Power Recline and Headrest