ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit D210

Indledning

Welcome to the instruction manual for your ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit. This kit provides an engaging and educational experience, allowing you to construct a detailed, walking mechanical T-Rex model from precision-cut wooden pieces. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Image: The fully assembled ROBOTIME ROKR T-Rex mechanical wooden model.

Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger:

• Dette produkt indeholder små dele og er ikke egnet til børn under 3 år på grund af kvælningsfare.
• Voksenopsyn anbefales under montering, især for yngre bygherrer.
• Håndter træstykker forsigtigt for at undgå splinter.
• Holdes væk fra åben ild eller overdreven varme.
• Do not force pieces together; if a piece does not fit, re-check the instructions.

Pakkens indhold

Før monteringen påbegyndes, skal du kontrollere, at alle komponenter er til stede:

• Pre-cut wooden sheets with model parts.
• Brugsanvisning.
• Small accessories (e.g., gears, shafts, springs, sandpaper, wax, screwdriver if applicable).

Image: The retail packaging for the ROBOTIME ROKR T-Rex D210 model kit.

Monteringsvejledning

Follow these steps carefully to assemble your T-Rex model. Refer to the diagrams in your physical instruction booklet for detailed visual guidance.

1. Forberedelse: Carefully remove all wooden pieces from their sheets. Use the included sandpaper to smooth any rough edges if necessary. Identify all parts according to the numbering in the instruction booklet.
2. Basissamling: Begin by assembling the base structure of the T-Rex, typically starting with the main body frame. Ensure all interlocking tabs fit snugly.
3. Legs and Tail: Attach the leg mechanisms and tail sections. Pay close attention to the orientation of gears and connecting rods for proper walking motion. Lubricate moving parts with the provided wax as instructed.
4. Head and Jaws: Assemble the head, including the jaw mechanism. Ensure the roaring function (if applicable) is correctly integrated.
5. Motor and Wiring (if applicable): If your model includes an electric motor, carefully follow the wiring diagrams to connect it to the battery compartment and internal mechanisms. Ensure correct polarity.
6. Afsluttende samling: Connect all major sections. Test the movement of joints and gears as you proceed to ensure smooth operation.
7. Test: Once fully assembled, test the walking and roaring functions. If the model does not move smoothly, re-check the connections and ensure all parts are properly aligned and lubricated.

Note: The complexity level for this model is indicated as Level: ★★★☆☆ and it contains 85 stk, suggesting a moderate challenge suitable for ages 12+.

Betjeningsvejledning

Once assembled, your ROBOTIME ROKR T-Rex is ready for action:

• Strømkilde: Insert the required batteries (not included) into the designated battery compartment, observing correct polarity.
• Aktivering: Locate the power switch, usually on the base or side of the model. Flip the switch to the "ON" position.
• Walking Function: The T-Rex should begin to walk forward. If movement is erratic, ensure it is on a flat, smooth surface.
• Roaring Function: The model is designed to roar. This function is typically synchronized with its movement or activated by a specific sensor (e.g., clapping, as suggested by the box art). Clap your hands near the model to activate the roaring sound.
• Deaktivering: To turn off the model, flip the power switch to the "OFF" position. Remove batteries if storing for extended periods.

Opretholdelse

To ensure the longevity and smooth operation of your wooden model:

• Rensning: Dust the model regularly with a soft, dry cloth. Do not use water or chemical cleaners, as they may damage the wood.
• Smøring: Periodically apply a small amount of the provided wax (or a suitable alternative like paraffin wax) to moving wooden gears and joints to maintain smooth operation.
• Opbevaring: Store the model in a dry place away from direct sunlight and extreme temperature fluctuations to prevent warping or damage to the wood.
• Batteripleje: Fjern batterierne, hvis modellen ikke skal bruges i længere tid, for at forhindre lækage.

Fejlfinding

Specifikationer

Garanti og support

For any questions regarding assembly, missing parts, or operational issues, please contact ROBOTIME customer support. While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects.

Please visit the official ROBOTIME webwebstedet eller se kontaktoplysningerne på produktemballagen for at få hjælp.

Note: Gem din købskvittering som købsbevis i tilfælde af garantikrav.