Manualer+

Idatalink BLADEAL

Idatalink Compustar Blade-AL Universal Bypass Integration Transponder Module User Manual

Model: BLADEAL

1.Overview

The Idatalink Compustar Blade-AL is a universal 'all-in-one' integration cartridge designed for seamless integration with Blade-compatible remote start modules, vehicle security, and convenience products. This module acts as an essential intermediary between your remote start system and the vehicle's computer, enabling remote start functionality without compromising factory security. It supports over 4000 vehicle models from 1997 to date, including exclusive KLON firmware applications.

Idatalink Compustar Blade-AL module and wiring harness

Figure 1: Idatalink Compustar Blade-AL module with its associated wiring harness.

2. Setup and Initial Programming

Before installation, the Blade-AL module requires programming with vehicle-specific firmware. This process is performed using a computer and the Idatalink Weblinkopdatering.

2.1 Nødvendige komponenter

  • Computer (Windows PC recommended for Internet Explorer compatibility)
  • Idatalink ADS-USB (sold separately)
  • Compustar Controller (e.g., CM7200)
  • Blade-AL Module
Idatalink ADS-USB cable

Figure 2: The Idatalink ADS-USB cable, essential for module programming.

2.2 Kontoregistrering

Opret en konto på det officielle program webwebsted: compustar.idatalink.com. It is recommended to complete registration using Internet Explorer and allow ActiveX to be enabled if prompted by the browser.

2.3 Hardwareforbindelse

  1. Dock your Blade-AL module into the dedicated slot on your Compustar controller. Ensure it is securely seated.
    2. Blade-AL module being inserted into Compustar controller

    Figure 3: Inserting the Blade-AL module into the Compustar controller.

  2. Plug the ADS-USB cable into an available USB port on your computer.
  3. Connect the cable labeled 'Idatalink Module' from the ADS-USB to the black RS232 data port on the Compustar controller.

2.4 Softwareprogrammering

Follow these steps to program your module:

  1. Start Internet Explorer og naviger til compustar.idatalink.com.
  2. Select the 'Flash Your Module' option on the webwebsted.
  3. Once the hardware is detected, you will be directed to the programming home screen.
  4. Under 'Vehicle Selection', choose the correct year, make, and model of the vehicle you will be working on.
  5. You can either configure specific features for the Blade-AL module or select 'Flash' to load the default settings.
  6. The site will confirm 'Flashing Completed!' and provide the appropriate installation guide for download.
  7. While the controller is still plugged in, select the 'Remote Starter' tab. Here, you can configure additional features such as remote start run time, programmable outputs, and double pulse unlock. These settings can also be adjusted in the vehicle using an OP500 programmer.
  8. This tab also allows you to update the firmware for the controller when available.

Video 1: Idatalink BLADE Remote Start/Security Bypass Module Flashing. This video demonstrates the process of flashing and updating your Blade module and Compustar controller using the Weblinkopdatering.

3. Betjening

Once the Blade-AL module and Compustar controller are properly flashed and configured, they will enable remote start and other convenience features for your vehicle. The module seamlessly integrates with your vehicle's immobilizer system, allowing the remote starter to function without requiring a spare key to be left inside the vehicle.

Specific operational details, such as remote start sequence, lock/unlock functions, and trunk release, will depend on the features configured during the programming process and the capabilities of your Compustar remote starter system.

Blade-AL module next to a car key fob with remote signal icon

Figure 4: The Blade-AL module facilitates remote functions via the vehicle's key fob or remote starter.

4. Vedligeholdelse

The Idatalink Compustar Blade-AL module is designed for long-term reliability and typically requires minimal maintenance. To ensure optimal performance and longevity:

  • Hold tør: Undgå at udsætte modulet for fugt eller væsker.
  • Temperaturkontrol: Do not expose the module to extreme temperatures, either hot or cold.
  • Fysisk beskyttelse: Ensure the module is securely mounted within the vehicle to prevent physical damage from vibrations or impacts.
  • Firmwareopdateringer: Tjek med jævne mellemrum compustar.idatalink.com website for new firmware releases that may offer improved performance, bug fixes, or expanded vehicle compatibility.

5. Fejlfinding

If you encounter issues with your Blade-AL module or Compustar system, consider the following common points:

  • Module Not Detected / Programming Issues:
    Ensure the ADS-USB cable is correctly connected to both the computer and the Compustar controller. Verify that you are using Internet Explorer for the Weblink Updater and that ActiveX is enabled. If issues persist, try a different USB port or computer.
  • Remote Start Not Functioning:
    Confirm that the Blade-AL module has been correctly flashed with the appropriate firmware for your specific vehicle year, make, and model. Check all wiring connections between the module, controller, and vehicle. Verify that the remote start features are enabled in the module's configuration settings.
  • Køretøjskompatibilitet:
    While the Blade-AL is universal, specific vehicle models require precise firmware. Ensure the correct firmware is loaded.
  • Professionel installation:
    The installation and programming of this module can be complex. Professionel installation kan varmt anbefales. Many issues arise from incorrect wiring or improper firmware flashing. If you are not experienced with car electronics, seek assistance from a certified installer.

  • Relaterede dokumenter - BLADEAL

    Preview iDatalink BLADE-AL(TB)-TL-EN Installationsvejledning
    Omfattende installationsvejledning til iDatalink BLADE-AL(TB)-TL-EN fjernstarter- og transponderbypass-systemet, der dækker ledningskrydsreferencediagrammer, ledningsdiagrammer og programmeringsprocedurer for forskellige Toyota- og Lexus-modeller.
    Preview iDatalink BLADE-AL(DL)-CH5-DA Installationsvejledning
    Omfattende installationsvejledning til iDatalink BLADE-AL(DL)-CH5-EN fjernstarter- og alarmintegrationsmodulet, der dækker køretøjskompatibilitet, ledningskrydsreferencediagrammer, ledningsdiagrammer og programmeringsprocedurer til Chrysler-, Dodge-, Jeep- og Mitsubishi-køretøjer.
    Preview iDatalink BLADE-AL(DL)-HA3-EN installationsvejledning til Honda- og Acura-køretøjer
    Denne installationsvejledning indeholder detaljerede instruktioner til iDatalink BLADE-AL(DL)-HA3-EN fjernstarter- og integrationsmodulet. Den indeholder kompatibilitetsdiagrammer for køretøjer, ledningsdiagrammer, modulprogrammering og fejlfindingstrin til Honda- og Acura-køretøjer.
    Preview iDatalink BLADE-AL(DL)-CH5-EN Install Guide: Remote Starter Installation
    This is the official installation guide for the iDatalink BLADE-AL(DL)-CH5-EN remote starter system. It provides detailed instructions, wiring diagrams, wire cross-reference charts, vehicle compatibility, module diagnostics, and programming procedures for various Chrysler, Dodge, Jeep, and Mitsubishi vehicles.
    Preview iDatalink FTI-CDP1 bypassmodul installationsvejledning til RAM 1500 (2013-2017)
    Omfattende installations- og programmeringsvejledning til iDatalink FTI-CDP1 bypass-modulet, designet til RAM 1500 TIP Start-køretøjer fra 2013-2017. Inkluderer ledningsføring, konfiguration og procedurer for fjernstart.
    Preview iDataLink HK2 Transponder Bypass Installationsvejledning til Hyundai og Kia
    Omfattende installationsvejledning til iDataLink HK2 Transponder Bypass-systemet, designet til Hyundai- og Kia-køretøjer. Indeholder ledningsdiagrammer, køretøjskompatibilitet og programmeringsvejledning.