Ematic EMW5306 Universal Full Motion TV-vægbeslag Brugsanvisning

1. Introduktion

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Ematic EMW5306 Universal Full Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.

The Ematic EMW5306 is designed to securely mount televisions ranging from 19 to 80 inches, supporting a maximum weight of 132 lbs (60 kg). Its full motion capabilities allow for optimal viewing angles through tilt, swivel, and extension adjustments.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer.

• Do not install this product on a wall that is not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the television.
• This mount is intended for use with televisions weighing up to 132 lbs (60 kg). Exceeding this weight limit may result in instability and potential injury.
• Use only the provided mounting hardware. Do not use power tools to tighten screws excessively, as this may damage the hardware or the mounting surface.
• Ensure all screws are securely tightened before using the mount.
• Hold børn og kæledyr væk under installationen.
• Regularly check the mount for any signs of damage or loosening.

3. Pakkens indhold

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact customer support.

Figur 1: Overview of the Ematic EMW5306 Full Motion TV Wall Mount, showing the wall plate, articulating arm, and TV bracket components. This image represents the main parts included in the package.

Typisk pakkeindhold inkluderer:

• Vægplademontering
• TV-beslag (2x)
• Monteringssæt (skruer, ankre, skiver, afstandsstykker)
• Instruktionsmanual

4. Specifikationer

5. Opsætning og installation

Nødvendige værktøjer (ikke inkluderet): Drill, stud finder, level, pencil, Phillips head screwdriver, socket wrench.

5.1. Tjekliste før installation

• Ensure your TV's weight and VESA pattern are within the mount's specifications.
• Identify the wall type (wood stud, concrete, brick). Different wall types require specific anchors and installation methods.
• Determine the desired mounting height for your TV.

5.2. Attaching TV Brackets to Television

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
2. Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
3. Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's monteringshuller.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. Do not overtighten.

5.3. Montering af vægpladen

1. Locate the wall studs using a stud finder. Mark the center of the studs. For concrete/brick walls, mark drill points directly.
2. Position the wall plate at the desired height and use a level to ensure it is perfectly horizontal. Mark the drill holes through the wall plate.
3. Drill pilot holes at the marked locations. For wood studs, drill appropriate size pilot holes. For concrete/brick, use a masonry drill bit and insert wall anchors.
4. Fastgør vægpladen til væggen med de medfølgende trækbolte og skiver. Spænd godt fast, men overspænd ikke.

Figur 2: The Ematic EMW5306 wall mount features a built-in bubble level, aiding in precise horizontal alignment during installation. This ensures your TV is mounted straight.

5.4. Ophængning af fjernsynet

1. Løft forsigtigt tv'et op med de medfølgende beslag med hjælp.
2. Hook the TV brackets onto the wall plate. Ensure the brackets are fully seated and engaged with the wall plate.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided. Refer to the specific diagrams in the full printed manual for exact locking procedures.

6. Betjeningsvejledning

The Ematic EMW5306 mount offers full motion capabilities to optimize your viewoplevelse.

Figur 3: This image illustrates the extensive range of motion of the Ematic EMW5306 mount, including 180-degree swivel and 12-degree tilt capabilities, suitable for 19-80 inch TVs.

• Justering af hældning: The TV can be tilted up to 12 degrees up or down. Loosen the tilt adjustment knobs (if present, refer to physical manual for exact location), adjust to the desired angle, and then re-tighten.
• Drejejustering: The articulating arm allows the TV to swivel up to 180 degrees left or right. Gently push or pull the TV to the desired horizontal angle.
• Udvidelse og tilbagetrækning: The mount can extend the TV up to 19 inches (48.26 cm) from the wall and retract it to a minimum distance of 2.64 inches (6.7 cm). Gently pull the TV forward or push it back towards the wall.

Figur 4: En sideprofile view of the Ematic EMW5306 mount in its fully retracted position, demonstrating its minimal distance from the wall (2.64 inches).

7. Vedligeholdelse

• Rensning: Tør holderen af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Periodisk eftersyn: Every 3-6 months, check all screws and connections to ensure they remain tight and secure. Inspect the mount for any signs of wear, damage, or corrosion.
• Smøring: De leddelte led er designet til jævn drift. Hvis bevægelsen bliver stiv, kan en lille mængde silikonebaseret smøremiddel påføres drejepunkterne.

8. Fejlfinding

• TV'et er ikke i vater efter installation:
  • Ensure the wall plate was installed perfectly level using a spirit level.
  • Some TV brackets allow for minor post-installation leveling adjustments. Refer to the specific design of your TV brackets.
• Mount feels loose or unstable:
  • Immediately remove the TV from the mount.
  • Re-check all wall plate mounting screws and TV bracket screws for tightness.
  • Verify that the wall structure is adequate to support the weight. If in doubt, consult a professional.
• Difficulty adjusting tilt or swivel:
  • Ensure no cables are snagged or obstructing movement.
  • Check for any locking mechanisms or tension screws that might need to be loosened for adjustment and then re-tightened.

9. Garantioplysninger

Warranty information for the Ematic EMW5306 Universal Full Motion TV Wall Mount was not provided in the product data. Please refer to the product packaging or the manufacturer's official webwebstedet for detaljer vedrørende garantidækning og vilkår.

10. Kundesupport

Specific customer support contact information was not provided in the product data. For assistance with installation, troubleshooting, or parts, please visit the official Ematic website or contact their customer service department through the contact details provided on your product packaging or purchase receipt.