1. Produktet er slutview
The AVANTEK Wireless Door Bell BA-11 is a versatile and easy-to-install doorbell system designed for convenience and reliability. It features a battery-powered receiver, eliminating the need for an electrical outlet, and a high-performance, waterproof transmitter. With an ultra-long wireless range, a wide selection of melodies, and adjustable volume levels, this doorbell ensures you are always aware of visitors.
Image: The AVANTEK Wireless Door Bell kit, showing the receiver, transmitter, and three AAA batteries.
2. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1 x Transmitter (Doorbell Button)
- 1 x Receiver (Chime Unit)
- Batteries (1 x CR2032 for transmitter, 3 x AAA for receiver)
- Selvklæbende tape
- Skruetrækker
- Skruer
- Ankre
Image: All components included in the AVANTEK Wireless Door Bell kit, neatly laid out.
3. Opsætningsvejledning
Follow these steps to set up your AVANTEK Wireless Door Bell:
- Installer batterier:
- For Sender: The CR2032 battery is pre-installed. Remove the plastic tab if present.
- For Modtager: Insert 3 AAA batteries (included) into the battery compartment.
- Mount the Transmitter (Doorbell Button):
The transmitter can be installed using either the provided adhesive tape or screws and anchors.
- Klæbemetode: Clean the mounting surface thoroughly. Peel off the protective film from the double-sided adhesive tape and firmly press the transmitter onto the desired location.
- Screw Method: Use the provided mounting bracket as a template. Mark the screw holes on the wall. Drill pilot holes if necessary, insert anchors, and then screw the mounting bracket onto the wall. Hook the transmitter onto the bracket.
Image: Illustration of installing the doorbell transmitter by screwing the mounting bracket to the wall and then attaching the transmitter.
- Place the Receiver (Chime Unit):
The receiver is battery-powered and portable. Place it in a central location within your home where the chime can be easily heard. It can be placed on a flat surface or hooked onto a wall using its integrated hook.
Image: The doorbell receiver mounted on a wall in a home setting, highlighting its built-in battery feature.
4. Betjeningsvejledning
Using your AVANTEK Wireless Door Bell is straightforward:
- Ringer på dørklokken: Simply press the button on the transmitter. The receiver will chime and its LED indicator will flash.
- Ændring af melodier: The receiver has 'Next' and 'Previous' buttons on its side. Press these buttons to cycle through the 52 available melodies until you find your preferred tune. The doorbell remembers your last selected melody even after battery replacement.
- Justering af lydstyrke: The receiver also features volume control buttons. There are 5 adjustable volume levels, with a maximum setting of 120 dB, allowing you to set the sound level appropriate for your environment. The volume setting is also remembered after battery replacement.
Image: The doorbell receiver displaying its features: 52 chimes and tunes, 5 volume levels, 0-115 dB volume range, and an eye-catching LED notification.
5. Vedligeholdelse
To ensure the longevity and optimal performance of your doorbell:
- Udskiftning af batteri: The transmitter uses a CR2032 lithium battery with a lifespan of up to 3 years. The receiver uses 3 AAA batteries. Replace batteries when the chime unit's sound becomes weak or the LED indicator on the transmitter no longer lights up when pressed.
- Rensning: Wipe the doorbell units with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Vejrbeskyttelse: The transmitter has an IP55 dustproof and waterproof rating, designed to withstand various harsh weather conditions. It operates effectively between -4 °F to 140 °F (-20 °C to 60 °C). While it is waterproof, avoid submerging it in water.
Image: The doorbell transmitter covered in water droplets, illustrating its IP55 dustproof and waterproof rating and wide operating temperature range.
6. Fejlfinding
If you encounter issues with your doorbell, consider the following:
- Ingen lyd fra modtageren:
- Check if the receiver batteries are correctly inserted and not depleted. Replace if necessary.
- Ensure the volume is not set to mute (0 dB). Adjust the volume level.
- Verify that the transmitter and receiver are within the effective wireless range (up to 1000 feet / 300 meters). Obstacles like thick walls or metal structures can reduce range.
- Transmitter Button Not Responding:
- Check the CR2032 battery in the transmitter. Replace if needed.
- Ensure the transmitter is securely mounted and not damaged.
- Interferens:
- While designed to minimize interference, try relocating the receiver or transmitter if you experience inconsistent performance, especially near other wireless devices.
Image: A diagram illustrating the 300-meter (1000 feet) ultra-long wireless range of the doorbell system, ensuring stable signal throughout a home.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | BA-11 |
| Strømkilde | Batteridrevet |
| Sender batteri | 1 x CR2032 (inkluderet) |
| Modtager batteri | 3 x AAA (inkluderet) |
| Gennemsnitlig batterilevetid | 3 years (Transmitter) |
| Wireless Range | Op til 1000 fod (300 meter) |
| Melodier | 52 valgbare klokker |
| Lydstyrkeniveauer | 5 justerbare niveauer |
| Lydniveau | Max 120 dB |
| Vandtæt vurdering | IP55 (sender) |
| Driftstemperatur | -4 °F til 140 °F (-20 °C til 60 °C) |
| Materiale | ABS |
| Farve | Sort |
| Produktdimensioner (modtager) | 1.2 x 1.1 x 0.4 cm (ca.) |
| Product Dimensions (Transmitter) | 1.2 x 0.6 x 0.2 cm (ca.) |
Image: Detailed dimensions of the doorbell receiver and transmitter in centimeters.
8. Garanti og support
For detailed warranty information and customer support, please refer to the official AVANTEK website or the user manual PDF provided with your product. You can also find the user manual PDF at: AVANTEK BA-11 User Manual PDF.
