Cecotec Ready Warm 9750 Rotate Force 2000W Varmeapparat Brugermanual

1. Introduktion

Thank you for choosing the Cecotec Ready Warm 9750 Rotate Force 2000W Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before use and retain them for future reference.

Vigtige sikkerhedsinstruktioner

• Always ensure the heater is placed on a stable, flat surface.
• Dæk ikke varmelegemet til, og bloker ikke dets luftindtag/-udtag.
• Hold brandfarlige materialer i sikker afstand fra varmeapparatet.
• Do not use the heater near water or in excessively humid environments.
• Unplug the heater from the power outlet before cleaning or moving it.
• This appliance is equipped with an Overprotect System to prevent overheating and a Tip-over safety sensor that automatically shuts off the unit if it falls or is moved to an unusual position.
• Sørg for, at strømforsyningen matcher voltage angivet på produktmærkaten.

Billede 1: Forside view of the Cecotec Ready Warm 9750 Rotate Force 2000W Heater.

2. Produktet er slutview

The Cecotec Ready Warm 9750 Rotate Force is a powerful 2000W fan heater designed for efficient and quiet heating. Its key features include:

• Warm 360 Technology: Ensures homogeneous heat distribution across three sides.
• OnlySilence Technology: Operates with a low noise level of only 30 dB for a comfortable environment.
• Neverfrost Anti-freeze System: Maintains room temperature above 0°C to prevent freezing.
• Overprotect System: Automatisk nedlukning i tilfælde af overophedning.
• Tip-over Safety System: Automatically turns off if the unit is knocked over or moved from its upright position.
• EasyGo System: Ergonomic handle and lightweight design (1.46 kg) for easy transport.
• VerticalDesign: Provides stability, lightness, reduced size, and good maneuverability.

Komponenter og kontroller

Familiarize yourself with the main components and controls of your heater:

1. Strømindikatorlys
2. Mode Selector (Cool, Eco, Turbo)
3. Adjustable Thermostat Dial (Min/Max)
4. Air Outlet Gitter
5. Strømledning

Billede 2: Top view illustrating the thermostat dial and mode selector.

3. Opsætning

Udpakning

• Tag forsigtigt varmelegemet ud af emballagen.
• Check for any signs of damage. If the product is damaged, do not use it and contact customer support.
• Gem emballagen til senere opbevaring eller transport.

Placering

• Placer varmeapparatet på en fast, plan og varmebestandig overflade.
• Ensure there is at least 50 cm of clear space around all sides of the heater to allow for proper airflow.
• Placer ikke varmeren direkte under en stikkontakt.
• Avoid placing the heater in areas where it could be easily knocked over or where the power cord could be a tripping hazard.
• The heater is suitable for indoor use, including bathrooms, provided it is not exposed to direct water spray.

Billede 3: Eks.ample of appropriate placement in an indoor setting.

4. Betjeningsvejledning

Tænd/sluk

1. Plug the power cord into a suitable electrical outlet. The power indicator light will illuminate.
2. To turn off the heater, rotate the mode selector to the 'Cool' (fan only) position, then unplug the unit from the wall outlet.

Valg af tilstand

Use the mode selector dial to choose your desired operating mode:

• Cool (Fan Only): Activates the fan without heat, providing a cooling breeze.
• Eco (1000 W): Provides low heat output for energy-efficient heating.
• Turbo (2000 W): Provides maximum heat output for rapid heating.

Justering af termostat

The adjustable thermostat allows you to set your desired room temperature:

1. Once a heating mode (Eco or Turbo) is selected, rotate the thermostat dial clockwise to increase the desired temperature or counter-clockwise to decrease it.
2. Varmeren tænder og slukker for at opretholde den indstillede temperatur.

Sikkerhedsfunktioner

• Overprotect System: If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool down for 30 minutes, and check for any obstructions before restarting.
• Tip-over Safety System: The heater will automatically turn off if it is accidentally tipped over. Place the heater back in an upright position on a stable surface to resume operation.
• Neverfrost System: In Eco mode, if the room temperature drops below 0°C, the heater will automatically activate to prevent freezing.

5. Vedligeholdelse

Rensning

• Tag altid stikket ud af stikkontakten til varmelegemet, og lad det køle helt af, inden det rengøres.
• Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Sørg for, at der ikke kommer vand ind i varmelegemets indre.
• Periodically clean the air inlet and outlet grilles with a vacuum cleaner to remove dust and lint.

Opbevaring

• Når varmeapparatet ikke er i brug, skal det opbevares et køligt og tørt sted.
• Det anbefales at opbevare varmeapparatet i originalemballagen for at beskytte det mod støv og skader.

6. Fejlfinding

If you experience issues with your heater, please consult the following table before contacting customer support:

7. Specifikationer

8. Garanti og support

Tilgængelighed af reservedele

Reservedele til dette produkt er tilgængelige i en periode på 10 år fra købsdatoen.

Kundesupport

For any questions, technical assistance, or warranty claims, please contact Cecotec customer support. Refer to the contact information provided with your purchase or visit the official Cecotec webwebsted for detaljer.