Utilitech 36-in Under Cabinet LED Light Bar Instruction Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.

Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

Always disconnect power at the circuit breaker before installation, servicing, or cleaning.
Dette produkt er beregnet til kun indendørs brugMå ikke udsættes for vand eller fugt.
Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
Hold emballagemateriale utilgængeligt for børn.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

Utilitech 36-inch Under Cabinet LED Light Bar (1)
Fjernbetjening (1)
Monteringsudstyr (skruer, ankre)
Instruktionsmanual (dette dokument)

Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile and white finish.

Opsætning og installation

The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:

Forbered installationsområdet: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
Marker monteringspunkter: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
Bor pilothuller: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
Tilslut til strøm: Plug the light bar's power cord into a standard 110-volt electrical outlet.

Note: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.

Betjeningsvejledning

Your Utilitech LED Light Bar is controlled via the included remote control.

Tænd/sluk: Tryk på ON button on the remote to turn the light bar on. Press the SLUKKET knappen for at slukke den.
Justering af lysstyrke: Brug + og - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
Fjernbetjeningens rækkevidde: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.

Opretholdelse

The Utilitech LED Light Bar requires minimal maintenance.

Rensning: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
LED lyskilde: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.

Fejlfinding

Hvis du støder på problemer med din lysbjælke, kan du se følgende almindelige problemer og løsninger:

Problem	Mulig årsag	Løsning
Lysbjælken tændes ikke.	Ingen strøm til stikkontakten. Fjernbetjeningens batteri er dødt. Remote control not paired or faulty.	Check the power outlet and circuit breaker. Udskift fjernbetjeningens batteri. Ensure remote is pointed at the light bar. If issues persist, contact customer support.
Lyset er svagt eller flimrer.	Lysstyrkeindstillingen er lav. Løs strømtilslutning.	Forøg lysstyrken ved hjælp af fjernbetjeningen. Sørg for, at netledningen er sat ordentligt i.
Fjernbetjeningen reagerer ikke.	Batteriet er dødt eller isat forkert. Obstruction between remote and light bar.	Replace battery and check polarity. Fjern eventuelle forhindringer.

Specifikationer

Feature	Detalje
Mærke	Utilitech
Modelnummer	38971
Produktdimensioner	36.5 x 3.25 x 1.5 tommer
Varens vægt	2.2 pund
Strømkilde	Elektrisk med ledning
Voltage	110 volt
Wattage	9.21 watt
Lysstyrke	800 lumen
Lys farve	Varm hvid
Lyskildetype	LED (Non-Removable)
Kontrolmetode	Fjernbetjening
Installationstype	Semi Flush Mount / Under Cabinet
Indendørs/Udendørs brug	Indendørs
Finish Type	Børstet
Skærmmateriale	Metal
Montering påkrævet	Ingen

Garantioplysninger

This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.

Kundesupport

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official webwebsted.

Fabrikant: Utilitech

	Utilitech L-1103-B-001 10-tommer bevægelsesaktiveret magnetisk LED-barlys – hurtigstartguide Kom i gang med din Utilitech 10-tommer batteridrevne bevægelsesaktiverede magnetiske LED-barlys (model L-1103-B-001). Denne vejledning indeholder oplysninger om installation, betjening, fejlfinding og sikkerhed.
	Utilitech 3-Inch Automatic Magnetic LED Drawer Lights - Installation & Guide Learn how to install, use, and maintain your Utilitech 3-inch automatic magnetic LED drawer lights (Model L-1102-B-02). Includes troubleshooting, safety, and warranty information.
	Samlings- og betjeningsmanual til Utilitech 36-tommer industriel højhastighedstromleventilator Denne manual indeholder monteringsvejledning, betjeningsvejledning, tips til pleje og vedligeholdelse samt råd om fejlfinding til Utilitech 36-tommer industriel højhastigheds tromleventilator (modelnummer SFDC-900F). Den indeholder sikkerhedsoplysninger, en reservedelsliste og garantioplysninger.
	UTILITECH 18-tommer Direct-Wire LED-underskabslampe installationsvejledning Omfattende guide til UTILITECH 18-tommer LED-underskabslampe med direkte ledningsføring (model MXW1011-L75K9027). Indeholder forberedelse, installationstrin, fejlfinding, pleje, garanti og sikkerhedsoplysninger.
	UTILITECH 12-tommer batteridrevet genopladelig LED-underskabslampe (model Z-RMCL12) - Installations- og betjeningsvejledning Omfattende guide til UTILITECH 12-tommer batteridrevet genopladelig LED-underskabslampe (model Z-RMCL12). Lær om installation, driftstilstande (TIL, AUTO, SLUK), fjernbetjeningsfunktioner, fejlfinding, pleje og garantioplysninger.
	Utilitech LED-båndlys hurtig referenceguide En hurtig referenceguide til Utilitech LED-båndlampen (model LR0005-LED36K60RGBW), der indeholder vigtige sikkerhedsoplysninger, forberedelsestrin, installationsvejledninger, pleje- og vedligeholdelsestips, garantioplysninger og fejlfindingsløsninger for optimal brug og levetid.

Utilitech 38971