Perel Elektronisk Pengeskab BG90017 Brugermanual

1. Introduktion

Thank you for choosing the Perel Electronic Safe, model BG90017. This safe is designed to protect your important documents and valuable possessions against theft. It features a secure digital keypad for access and an emergency key for manual override. The safe's interior is carpeted to prevent scratches to delicate items, and it includes mounting hardware for secure installation in your home or office.

Please read this manual carefully before operating the safe to ensure proper use and to maximize its security features.

2. Sikkerhedsoplysninger

• Keep the emergency keys in a secure location away from the safe. Do not store them inside the safe.
• Do not leave the safe unlocked or the door ajar.
• Sørg for, at pengeskabet er sikkert monteret på en væg eller et gulv for at forhindre uautoriseret fjernelse.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at undgå at blive låst ude.
• Undgå at udsætte pengeskabet for ekstreme temperaturer eller fugtighed.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Perel Electronic Safe Unit (BG90017)
• Nødtilsidesættelsestaster (2)
• Monteringsbolte (2)
• Brugermanual

Figur 3.1: Pakkens indhold
The package includes the Perel Electronic Safe, two emergency override keys, two mounting bolts for secure installation, and this instruction manual. Please note: 4 AA batteries are required for operation and are not included in the package.

4. Opsætning

4.1. Batteriinstallation

1. Find batterirummet på indersiden af ​​​​døren til pengeskabet.
2. Åbn batteridækslet.
3. Isæt 4 nye AA alkaline-batterier, og sørg for korrekt polaritet (+/-).
4. Close the battery cover. The safe will emit a beep, indicating successful battery installation.

Figur 4.1: Batterirummets placering
Denne detaljerede view shows the battery compartment, typically located on the inside of the safe door, where 4 AA batteries are inserted.

4.2. Indstilling af din personlige kode

The safe comes with a factory default code (usually '159' or '1234'). It is crucial to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. The safe will beep, and the yellow indicator light on the keypad will illuminate.
2. Within 5 seconds, enter your new 3 to 8 digit personal code on the keypad.
3. Press the 'A' or '#' button to confirm your new code. The safe will beep again, and the yellow light will turn off, indicating the code has been successfully set.
4. Test your new code with the door open for at sikre, at det fungerer korrekt, før du lukker pengeskabet.

4.3. Montering af pengeskabet

For enhanced security, it is highly recommended to securely fix the safe to a wall or floor using the provided mounting bolts.

1. Choose a suitable location for mounting, such as inside a cabinet, closet, or directly to a wall or floor.
2. Open the safe door and locate the pre-drilled mounting holes on the back or bottom of the safe.
3. Mark the drilling points on the wall or floor through the holes.
4. Drill pilot holes at the marked locations using an appropriate drill bit for your surface (e.g., masonry bit for concrete/brick, wood bit for studs).
5. Align the safe with the drilled holes and insert the mounting bolts through the safe and into the wall/floor.
6. Spænd boltene godt fast for at forankre pengeskabet ordentligt.

Figure 4.2: Secure Mounting Options
The included mounting bolts allow for secure installation of the safe to a wall or inside a cabinet, significantly increasing its security against unauthorized removal.

5. Betjeningsvejledning

5.1. Opening the Safe with Your Digital Code

1. Indtast din personlige kode på 3 til 8 cifre på tastaturet.
2. Press the 'A' or '#' button to confirm.
3. If the code is correct, the green indicator light will illuminate, and you will hear a beep.
4. Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.

Figure 5.1: Digital Keypad Access
The front panel of the Perel Electronic Safe, featuring the digital keypad for setting and entering your personal code.

5.2. Opening the Safe with the Emergency Key

The emergency key provides manual access to the safe in case of forgotten code, dead batteries, or electronic malfunction.

1. Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
2. Fjern dækslet.
3. Sæt en af ​​nødnøglerne i nøglehullet, og drej den mod uret.
4. While holding the key turned, rotate the main knob clockwise to open the safe door.
5. Once open, remove the emergency key and replace the cover.

Figure 5.2: Emergency Key Usage
The emergency key provides a reliable backup method to open the safe, essential for situations where the digital code is forgotten or batteries are depleted.

5.3. Lukning af pengeskabet

1. Luk pengeskabslågen godt.
2. Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.

6. Vedligeholdelse

6.1. Udskiftning af batteri

When the red indicator light flashes or the safe emits continuous beeps during operation, it indicates low battery power. Replace all 4 AA batteries immediately following the instructions in Section 4.1.

6.2. Rensning

Rengør pengeskabets yderside med en blød, tør kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektroniske komponenter.

7. Fejlfinding

• Pengeskabet åbner ikke med digital kode:
  • Sørg for, at batterierne er friske og korrekt installeret.
  • Verify you are entering the correct 3-8 digit code.
  • Try opening with the emergency key (refer to Section 5.2).
• Tastaturet reagerer ikke:
  • Udskift batterierne.
  • If still unresponsive, use the emergency key to open the safe.
• Safe beeps continuously or red light flashes:
  • This indicates low battery power. Replace all 4 AA batteries.
• Forgotten code:
  • Brug nødnøglen til at åbne pengeskabet.
  • Once open, reset the code following instructions in Section 4.2.

8. Specifikationer

Figure 8.1: Safe Dimensions
External dimensions of the safe are 20 cm (height) x 31 cm (width) x 20 cm (depth). The internal depth is 14 cm, providing an 8.5-liter storage capacity.

9. Garanti og support

Specific warranty information for the Perel Electronic Safe BG90017 is not provided in this manual. For details regarding warranty coverage, technical support, or spare parts availability, please refer to the original purchase documentation or contact Perel customer service directly through their official webwebstedet eller forhandleren, hvor produktet blev købt.

Manufacturer: Velleman China