1. Introduktion
This manual provides comprehensive instructions for the Behringer SUPER-X PRO CX2310, a high-precision stereo 2-way/mono 3-way crossover with a dedicated subwoofer output. Designed for professional audio applications, this device accurately divides audio signals into different frequency bands, optimizing sound reproduction through multiple loudspeakers.
The CX2310 ensures precise frequency separation, allowing each speaker component (e.g., woofers, mid-range drivers, tweeters, subwoofers) to receive only the frequencies it is designed to reproduce efficiently. This results in improved sound clarity, increased system efficiency, and enhanced speaker protection.
Figur 1: Vinklet front view of the Behringer SUPER-X PRO CX2310 crossover.
2. Vigtige sikkerhedsinstruktioner
Before operating the CX2310, please read and adhere to the following safety guidelines:
- Strømforsyning: Connect the unit only to the specified mains voltage. Ensure the power cord is undamaged and properly grounded.
- Fugtighed: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the device.
- Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbningerne.
- Varme: Do not place the unit near heat sources such as radiators, heat registers, or other heat-producing appliances.
- Service: Forsøg ikke selv at udføre service på enheden. Overlad al service til kvalificeret servicepersonale.
- Rensning: Rengør kun med en tør klud.
3. Nøglefunktioner
The Behringer SUPER-X PRO CX2310 offers a range of features for precise audio signal processing:
- Driftstilstande: Configurable for stereo 2-way or mono 3-way operation.
- Subwooferudgang: Dedicated mono subwoofer output with independent frequency control.
- Crossover filtre: State-variable 24 dB/octave Linkwitz-Riley filters for precise frequency separation.
- Individual Mute Switches: Each output features a mute switch for easy system adjustment and troubleshooting.
- Input Gain Control: Adjustable input gain for level matching.
- Udgangsniveaukontroller: Independent level controls for all outputs.
- Phase Invert Switches: Phase invert switches on all outputs for flexible system alignment.
- LED-indikatorer: Clear LED indicators for input clip, mode selection, and output levels.
- Forbindelser: Balanced XLR inputs and outputs for professional connectivity.
4. Kontrol og stik
4.1. Kontroller på frontpanelet
Figur 2: Frontpanel overview of the CX2310.
- INPUT GAIN: Justerer indgangsfølsomheden for den respektive kanal.
- CLIP LED: Illuminates when the input signal is clipping. Reduce input gain if this LED lights up frequently.
- LAVT SNIT: Activates a high-pass filter to remove unwanted low frequencies.
- XOVER FREQ (LOW/HIGH): Sets the crossover frequency between the low and high outputs for stereo 2-way mode, or low and mid outputs for mono 3-way mode.
- XOVER FREQ (MID/HIGH): Sets the crossover frequency between the mid and high outputs for mono 3-way mode.
- LOW OUTPUT LEVEL: Adjusts the output level for the low-frequency band.
- HIGH OUTPUT LEVEL: Adjusts the output level for the high-frequency band.
- MID OUTPUT LEVEL: Adjusts the output level for the mid-frequency band (mono 3-way mode only).
- MUTE BUTTONS: Silences the corresponding output for system tuning.
- PHASE INVERT: Inverts the phase of the corresponding output signal.
- MODUS SWITCH: Selects between STEREO 2-WAY and MONO 3-WAY operation.
- SUBWOOFER-FREKVENS: Sets the crossover frequency for the dedicated subwoofer output.
- SUBWOOFER GAIN: Adjusts the output level for the subwoofer.
- AFBRYDEREN: Tænder eller slukker for enheden.
4.2. Bagpanelstik
Figur 3: Bagpanel overview of the CX2310.
- AC-INDGANG: Standard IEC connector for the mains power cable.
- INPUT L/R: Balanced XLR inputs for the stereo audio signal.
- LOW OUTPUT L/R: Balanced XLR outputs for the low-frequency signal.
- MID OUTPUT L/R: Balanced XLR outputs for the mid-frequency signal (mono 3-way mode only).
- HIGH OUTPUT L/R: Balanced XLR outputs for the high-frequency signal.
- SUB UD: Balanced XLR output for the mono subwoofer signal.
5. Opsætning og tilslutning
Proper setup is essential for optimal performance. Always ensure all audio equipment is powered off before making connections.
5.1. Stereo 2-Way Operation
This configuration is suitable for systems with main stereo speakers and an optional subwoofer.
- Connect the stereo output of your mixer or audio source to the INDGANG L og INDGANG R XLR connectors on the CX2310 rear panel.
- Indstil MODE switch on the front panel to STEREO 2-WAY.
- Tilslut LOW OUTPUT L/R to the inputs of your low-frequency amplifier (e.g., for woofers).
- Tilslut HIGH OUTPUT L/R to the inputs of your high-frequency amplifier (e.g., for tweeters/mid-range).
- If using a subwoofer, connect the SUB UD to the input of your subwoofer amplivligere eller aktiv subwoofer.
- Tilslut strømkablet til AC INPUT and then to a suitable power outlet.
5.2. Mono 3-Way Operation
This configuration is ideal for a single, full-range speaker system divided into low, mid, and high frequency bands.
- Connect a mono audio source to the INDGANG L XLR connector. (The CX2310 will sum the inputs for mono 3-way operation if both are connected, or use only the left input if only one is present).
- Indstil MODE switch on the front panel to MONO 3-WAY.
- Tilslut LOW OUTPUT L to the input of your low-frequency amplivligere.
- Tilslut MID OUTPUT L to the input of your mid-frequency amplivligere.
- Tilslut HIGH OUTPUT L to the input of your high-frequency amplivligere.
- If using a subwoofer, connect the SUB UD to the input of your subwoofer amplivligere eller aktiv subwoofer.
- Tilslut strømkablet til AC INPUT and then to a suitable power outlet.
6. Betjeningsvejledning
Once connected, follow these steps to configure and operate your CX2310:
- Tænd: Turn on all connected amplifiers and then the CX2310. When powering down, turn off the CX2310 first, then the amplivførere.
- Indledende indstillinger: Indstil alle INPUTGIVNING og OUTPUT NIVEAU controls to their center (0 dB) position. Set crossover frequencies to a starting point recommended by your speaker manufacturer, or a common value like 100 Hz for low/high and 2 kHz for mid/high.
- Justering af indgangsniveau: Play an audio signal through your system. Adjust the INPUTGIVNING until the signal is strong but the CLIP LED only flashes occasionally on peaks.
- Crossover Frequency Adjustment: Juster forsigtigt XOVER FREQ controls to achieve the desired frequency separation. Listen for smooth transitions between frequency bands.
- Udgangsniveaujustering: Brug den enkelte OUTPUT NIVEAU controls to balance the volume of each frequency band. The STUM buttons can be used to isolate bands for easier adjustment.
- Subwoofer integration: Juster SUBWOOFER FREKV og SUBWOOFER GAIN controls to blend the subwoofer output seamlessly with the main speakers.
- Fasejustering: Eksperimenter med FASEOMKENDELSE switches if you notice phase cancellation or an unnatural sound. This helps ensure all speakers are working in phase.
7. Vedligeholdelse
The Behringer CX2310 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- Rensning: Afbryd strømmen til enheden før rengøring. Brug en blød, tør klud til at tørre ydersiden af. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Miljø: Operate the unit in a clean, dry environment. Avoid excessive dust, humidity, and extreme temperatures.
- Ventilation: Sørg for, at ventilationsåbningerne ikke er blokerede for at forhindre overophedning.
- Opbevaring: Hvis enheden opbevares i længere tid, skal den afbrydes til strømmen og opbevares et køligt og tørt sted, helst i originalemballagen.
8. Fejlfinding
If you encounter issues with your CX2310, consult the following table before contacting support:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No sound from any output. | Unit not powered on; incorrect connections; input gain too low; all outputs muted. | Check power cable and switch; verify all XLR connections; increase input gain; ensure mute buttons are disengaged. |
| No sound from a specific output. | Output muted; output level too low; incorrect mode selection. | Check the specific output's mute button; increase output level; verify correct 2-way/3-way mode. |
| Forvrænget lyd. | Input signal too high (clipping); output signal too high. | Reduce input gain if CLIP LED is constantly lit; reduce output levels. |
| Brummen eller støj. | Ground loop; unbalanced cables; faulty cables. | Ensure all equipment is properly grounded; use balanced XLR cables; test with different cables. |
| Subwoofer not working. | Subwoofer output muted; subwoofer gain too low; incorrect frequency setting. | Check subwoofer mute button; increase subwoofer gain; adjust subwoofer frequency control. |
9. Specifikationer
Technical specifications for the Behringer SUPER-X PRO CX2310:
- Varens vægt: 7.5 pund
- Produktdimensioner: 19 x 1.75 x 8.46 tommer
- Connector Type: XLR
- Hardwaregrænseflade: 1/4-inch Audio (Note: Product images show XLR, specification might be generic or refer to internal components)
- Signalformat: Analog
- Strømkilde: Elektrisk med ledning
- Voltage: 9 Volts (Internal operating voltage, not mains input)
- Crossover filtre: Linkwitz-Riley, 24 dB/oktav
Figure 4: Silhouette illustrating the dimensions of the CX2310.
10. Garanti og support
The Behringer SUPER-X PRO CX2310 comes with a standard 1-year limited warranty. Users can extend this warranty to 3 years by registering their product online within 90 days of purchase. For detailed warranty terms and conditions, please refer to the official Behringer webwebsted.
For technical support, service, or further inquiries, please visit the official Behringer support page or contact their customer service department. Keep your purchase receipt and product serial number readily available when seeking support.
For mere information, besøg Behringer Official Webwebsted.
