Thule Wingbar Evo brugsanvisning

Produkt overview

The Thule Wingbar Evo is an advanced aerodynamic roof rack system designed to provide an exceptionally quiet ride, easy installation of accessories, and a maximum loading area for your vehicle. Its innovative design minimizes noise and drag, contributing to improved fuel economy.

Figure 1: A single Thule Wingbar Evo, showcasing its aerodynamic profile.

Nøglefunktioner omfatter:

• WindDiffuser Technology: Engineered to disturb airflow, significantly reducing noise and drag for better fuel efficiency.
• TrailEdge Design: Further reduces aerodynamic drag by allowing clean air separation from the bar.
• SmartSlides: A slidable length scale that also functions as an under-bar aerodynamic cover, ensuring quick and hassle-free rack installation.
• SwingBlade End Cap: Pivots open to provide full access to the T-slot, simplifying accessory installation and removal.
• Upper T-track with QuickAccess Interface: Allows for smooth and efficient installation and removal of various accessories.
• BoxBeam Internal Structure: Provides an exceptionally strong and durable load bar.

Hvad er inkluderet

Your Thule Wingbar Evo package includes:

• One pair of Thule Wingbar Evo load bars.
• Corresponding end caps for both bars.
• Rubber strips for the T-track.

Opsætning og installation

Proper installation is crucial for the safety and performance of your Thule Wingbar Evo system. Always refer to the specific Thule Buyer's Guide for your vehicle to ensure compatibility and correct fitment. The system is designed for easy installation, often requiring minimal tools.

Figure 2: Thule Wingbar Evo system mounted on a vehicle's roof rails.

Installationstrin:

1. Consult the Fit Guide: Before beginning, check the official Thule Fit Guide (available online or with your purchase) to determine the correct bar length and precise placement measurements (W and Z values) for your specific vehicle make and model. This ensures optimal performance and safety.
2. Prepare the Bars:
   • Locate the SmartSlides measurement scale on the underside of the bars. This scale assists in accurate positioning of the foot packs.
   • Open the SwingBlade end caps to access the T-slot for accessory installation later, or to adjust the rubber strips.
     

     Figure 3: The SwingBlade end cap pivots for easy access.
3. Attach Foot Packs: Secure the Thule Evo Clamp foot packs to the Wingbars according to the instructions provided with the foot pack and the vehicle-specific fit kit. Ensure the foot pads are correctly positioned and the clamping mechanism is aligned with your vehicle's roof line.
   

   Figure 4: Detail of the Thule logo on the foot pack and the end cap.

4. Montering på køretøj: Carefully place the assembled roof rack system onto your vehicle's roof. Adjust the position of the bars to match the W and Z measurements from your fit guide.
   

   Figure 5: The SmartSlides measurement scale on the underside of the bar helps with precise foot pack placement.
5. Spænd sikkert: Use the supplied Allen key torque wrench to tighten the foot pack clamps. Ensure you hear two clicks, indicating proper torque has been applied. Tighten all four clamper jævnt.
   

   Figur 6: Øverst view of the Wingbar Evo, showing the rubber strip in the T-track.

6. Install Rubber Strips: If not already in place, install the rubber strips into the T-track on the top of the bars. These strips help to further reduce wind noise and protect the T-track.

Note: Some users have found the rubber strip installation to be challenging. Using a small amount of soapy water can aid in sliding the strips into place.

Betjening af systemet

Once installed, the Thule Wingbar Evo system provides a stable platform for various Thule accessories. The integrated T-track allows for quick and secure attachment of bike carriers, ski carriers, cargo boxes, and more.

Montering af tilbehør:

• Open the SwingBlade end cap to expose the T-track.
• Slide your T-track compatible accessory into the slot.
• Secure the accessory according to its specific instructions.
• Close the SwingBlade end cap to cover the T-track opening.

The QuickAccess interface ensures that accessories can be installed and removed smoothly and efficiently.

Opretholdelse

Regular maintenance will ensure the longevity and optimal performance of your Thule Wingbar Evo system.

• Regelmæssig rengøring: Clean the bars and foot packs periodically with mild soap and water. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Tjek tæthed: Before each use, especially after initial installation or after carrying heavy loads, check that all mounting bolts and clamps er forsvarligt tilspændt.
• Efterse komponenter: Periodically inspect the rubber strips, end caps, and foot pads for any signs of wear, cracking, or damage. Replace any worn components as needed.
• Vinterpleje: If you live in an area with harsh winters, consider removing the roof rack system during the off-season to protect it from extreme weather conditions and road salt.

Fejlfinding

Her er nogle almindelige problemer og deres potentielle løsninger:

Specifikationer

Garanti og support

Thule products are rigorously tested and are subject to strict quality controls. Thule guarantees all products against defects in material and workmanship. For detailed warranty information, product registration, or to find a local dealer for support, please visit the official Thule website or refer to the full User Guide provided with your product.

Du kan også finde den officielle brugervejledning (PDF) her.