Indledning
Welcome to the user manual for the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector. This device is designed to enhance your home safety system by detecting the sound of existing UL-listed smoke detectors and relaying that information to your Zigbee hub.
Produkt overview
The Ecolink FFZB1-ECO is a compact, battery-powered device that listens for the distinct siren pattern of a smoke detector. Upon detection, it transmits a signal to your compatible Zigbee hub, allowing for integration into your smart home system.
Billedbeskrivelse: En front view of the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector, a white, circular device with two horizontal slits and a small indicator light.
Nøglefunktioner
- Wireless listening capability for UL-listed smoke detectors.
- Sends alarm signals to your Zigbee hub.
- Designed for easy installation and setup.
- Long battery life (up to five years).
- Compatible with Zigbee hubs such as Amazon Echo Plus and Samsung SmartThings Hub.
Image Description: An image illustrating the Ecolink FFZB1-ECO device in a modern living room setting, highlighting its discreet design and integration into a smart home environment.
Hvordan det virker
The Ecolink FFZB1-ECO detector is positioned within hearing range of your existing UL-listed smoke detectors. When a smoke detector activates and emits its siren, the FFZB1-ECO recognizes this specific audio pattern. It then communicates this event wirelessly to your Zigbee hub, which can then trigger pre-configured actions, such as sending notifications to your smartphone or activating other smart home devices.
Image Description: A visual representation showing the Ecolink FFZB1-ECO device near a ceiling-mounted smoke detector, with smoke in the background, illustrating its function of detecting smoke alarm sounds.
Opsætning og installation
Pakkens indhold
- Ecolink FFZB1-ECO Siren Audio Detector
- 1 CR123A Battery (pre-installed)
- Monteringsudstyr (skruer, tape)
Image Description: The retail packaging for the Ecolink Firefighter Zigbee Wireless Audio Detector, showing the product name and brand logo.
Installation af batteri
The device comes with a CR123A battery pre-installed. To activate, ensure the battery tab is removed if present.
Parring med en Zigbee Hub
- Place your Zigbee hub into pairing mode. Refer to your hub's specific instructions for this process.
- On the Ecolink FFZB1-ECO, press and hold the pairing button (often located inside the battery compartment or a small pinhole) for approximately 3 seconds until the LED indicator begins to flash.
- The device should appear on your Zigbee hub's interface. Follow the on-screen prompts to complete the pairing process.
- Once successfully paired, the LED indicator will stop flashing.
Montering af detektoren
Choose a location within 6 inches of your existing smoke detector for optimal audio detection. Ensure the device is not obstructed.
- Brug af skruer:
- Remove the back cover of the FFZB1-ECO.
- Mark the desired mounting location on the wall or ceiling.
- Drill pilot holes if necessary and secure the back cover using the provided screws.
- Reattach the main unit to the secured back cover.
- Brug af klæbebånd:
- Rengør monteringsfladen grundigt.
- Apply the adhesive tape to the back of the device.
- Press the device firmly onto the desired surface for at least 30 seconds.
Image Description: The back view of the Ecolink FFZB1-ECO device, showing mounting holes and product identification labels including "Model: FFZB1-ECO" and "FCC ID: XQC-FFZB1".
Billedbeskrivelse: En sideprofile view of the Ecolink FFZB1-ECO device, illustrating its slim design and the "Slide to Remove" text on the casing.
Betjening af detektoren
Normal drift
Once installed and paired, the Ecolink FFZB1-ECO operates passively, listening for smoke alarm sounds. The LED indicator will typically remain off during normal operation.
Alarmdetektion
When a smoke detector siren is detected, the FFZB1-ECO will transmit an alarm signal to your Zigbee hub. Your hub will then execute any configured automations, such as sending notifications or activating other smart devices.
Test af detektoren
It is recommended to test the detector periodically to ensure proper function.
- Activate your existing smoke detector's test button.
- Listen for the smoke detector's siren.
- Verify that your Zigbee hub receives the alarm signal from the FFZB1-ECO and triggers any associated actions (e.g., a notification on your smartphone).
Opretholdelse
Udskiftning af batteri
The device uses one CR123A battery. When the battery level is low, your Zigbee hub should report a low battery status.
- Gently twist or slide the device off its mounting plate or remove it from the adhesive.
- Åbn batterirummet.
- Remove the old CR123A battery and insert a new one, observing polarity.
- Reattach the device to its mounting location.
- Verify that the device reconnects to your Zigbee hub and reports a healthy battery status.
Rensning
Clean the device periodically with a soft, dry cloth. Avoid using liquid cleaners or solvents.
Fejlfinding
Enheden parrer ikke
- Ensure your Zigbee hub is in pairing mode.
- Confirm the device's battery is installed correctly and has sufficient charge.
- Try moving the device closer to the Zigbee hub during the pairing process.
- Reset the device to factory settings (refer to specific instructions for reset, often involves holding the pairing button for an extended period or removing/reinserting battery multiple times).
No Alarm Detection
- Verify the device is mounted within 6 inches of the smoke detector.
- Ensure the smoke detector's siren is loud enough and its sound pattern is consistent.
- Test the smoke detector manually and observe if the FFZB1-ECO's LED briefly indicates detection (if applicable, check manual for LED behavior during detection).
- Check the device's battery level via your Zigbee hub.
Falske alarmer
- Ensure the device is not exposed to other loud noises that mimic a smoke alarm siren.
- Reposition the device if necessary to minimize interference from other sound sources.
Specifikationer
| Feature | Detalje |
|---|---|
| Model | FFZB1-ECO |
| Mærke | Ecolink |
| Forbindelse | Zigbee |
| Strømkilde | 1 x CR123A Battery (included) |
| Batterilevetid | Op til 5 år |
| Dimensioner | 10.4 x 8 x 4.2 tommer (Produkt) |
| Varens vægt | 1.09 ounces (31 gram) |
| Farve | Hvid |
| UPC | 0851166005039 |
| FCC ID | XQC-FFZB1 |
| IC | 9863C-FFZB1 |
Garanti og support
For warranty information and technical support, please refer to the official Ecolink webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.
