Indledning
Thank you for choosing the JVD N9360.3 Classic Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.
Image: The JVD N9360.3 Classic Wall Clock, featuring a dark wooden frame, a white analog dial with black numerals, and a visible brass-toned pendulum.
Sikkerhedsoplysninger
- Ensure the clock is securely mounted to a sturdy wall surface to prevent falling.
- Opbevar batterier utilgængeligt for børn.
- Bland ikke gamle og nye batterier eller forskellige typer batterier.
- Bortskaf brugte batterier i henhold til lokale regler.
- Undgå at udsætte uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
Pakkens indhold
Kontroller venligst, at alle varer er til stede i pakken:
- JVD N9360.3 Wall Clock Unit
- Pendulum
- Instruktionsmanual (dette dokument)
Bemærk: Batterier er ikke inkluderet og skal købes separat.
Opsætning
1. Udpakning
- Tag forsigtigt uret ud af emballagen.
- Undersøg uret for tegn på skader.
2. Batteriinstallation
- Find batterirummet på bagsiden af urmekanismen.
- Insert one (1) AA battery, ensuring the polarity (+/-) matches the indicators inside the compartment.
- Luk batterirummets dæksel forsvarligt.
3. Indstilling af tid
- Turn the time-setting knob (usually a small wheel) located on the back of the clock mechanism in the direction indicated until the hands display the correct time.
- Do not move the clock hands directly, as this may damage the mechanism.
4. Fastgørelse af pendulet
- Gently hook the pendulum onto the pendulum hanger located below the clock mechanism.
- Ensure the pendulum swings freely without obstruction.
5. Montering af uret
- Vælg et passende sted på en solid væg.
- Use appropriate wall anchors and screws (not included) to securely hang the clock. The clock features a keyhole slot on the back for mounting.
- Ensure the clock is level for optimal pendulum operation and aesthetic appeal.
Betjeningsvejledning
Once the battery is installed, the time is set, and the pendulum is attached, the clock will begin to operate. The pendulum is decorative and does not affect the timekeeping accuracy of the quartz movement.
- To adjust the time, repeat step 3 from the Setup section.
- The clock operates continuously until the battery power is depleted.
Opretholdelse
Rensning
- Wipe the clock casinmed en blød, tør klud.
- Brug ikke slibende rengøringsmidler, opløsningsmidler eller kemiske spraymidler, da disse kan beskadige overfladen.
- For the glass, use a glass cleaner applied to a cloth, not directly to the clock.
Udskiftning af batteri
- Replace the battery annually or when the clock begins to lose time or stops functioning.
- Følg trinene til batteriinstallation, der er beskrevet i afsnittet Opsætning.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uret kører ikke | Dødt eller forkert installeret batteri | Udskift batteriet med et nyt AA-batteri, og sørg for at polariteten vender korrekt. |
| Uret taber eller vinder tid | Svagt batteri | Replace battery with a fresh AA battery. |
| Pendulum not swinging | Pendulum not properly attached or obstructed | Ensure pendulum is correctly hooked and swings freely. |
Specifikationer
- Mærke: JVD
- Modelnummer: N9360.3
- Materiale: Træ
- Skærmtype: Analog
- Form: Round (dial)
- Rammemateriale: Træ
- Monteringstype: Vægmontering
- Alarm: Ingen
- Driftstilstand: Kvarts vægur
- Batterier påkrævet: 1x AA (medfølger ikke)
Garanti og support
For information regarding warranty coverage or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. JVD is committed to providing quality products and customer satisfaction.
