Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Introduktion

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Sikkerhedsinstruktioner

Vigtig: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i elektrisk stød, brand eller personskade.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Sørg for, at strømforsyningen voltage stemmer overens med typeskiltet på apparatet.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Nedsænk ikke apparatet i vand eller andre væsker.
• Hvis forsyningsledningen er beskadiget, skal den udskiftes af producenten, dennes serviceagent eller lignende kvalificerede personer for at undgå en fare.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.

3. Produktet er slutview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Varmeelementer: Horizontal round tubes for towel drying and radiant heat.
• Blæser: Located at the bottom, provides rapid heat for quick room warming.
• LCD kontrolpanel: Displays temperature, mode, and programming settings.
• Kontrolknapper: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Figur 3.2: Forside view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view of the appliance, showcasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Figur 3.3: Vinklet view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Opsætning og installation

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Montering

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Elektrisk tilslutning

• Advarsel: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Sørg for korrekt jording.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Betjeningsvejledning

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Tænd/sluk

• Tryk på Magt button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 LCD-skærm og betjeningselementer

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Mode, +/-, Prog) to adjust settings.

5.3 driftstilstande

Your radiator typically offers several operating modes:

• Komforttilstand: Maintains a set temperature for continuous comfort.
• Øko-tilstand: Opretholder en lavere, energibesparende temperatur.
• Frostbeskyttelsestilstand: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Programtilstand: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Tryk på Mode button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programmering

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Tryk på Prog knappen for at gå ind i programmeringstilstand.
2. Brug Mode or arrow buttons to select the day and time segment you wish to program.
3. Brug +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Trykke Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Vedligeholdelse

Regelmæssig rengøring sikrer optimal ydeevne og forlænger levetiden på din radiator.

• Rensning: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Generel inspektion: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Fejlfinding

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Specifikationer

• Mærke: Sauter
• Model: Marapi
• Modelnummer: 3410532201757
• Type: Electric Towel Dryer Radiator with Blower
• Strømudgang: 1750 watt
• Kontrollere: LCD Screen, Programmable
• Vægt: Cirka 27.25 kg
• ASIN: B07HGPKKJD

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webwebsted. Gem din købsbevis til garantikrav.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webwebstedet eller på din produktemballage.

Sauter Official Webwebsted: www.sauter.fr (Bekræft venligst den korrekte regionale webhjemmeside for support.)