Manualer+

Custom Dynamics PB-575-B

Custom Dynamics ProBEAM 5 3/4" LED-forlygteamp Instruktionsmanual

Model: PB-575-B

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp, model PB-575-B. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Custom Dynamics ProBEAM 5 3/4 inch LED Headlamp, foran view

Figur 1: Front view of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B). This image shows the clear lens, the upper LED light bars, and the lower projector-style LED elements, along with the Custom Dynamics logo at the bottom.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger:

  • Frakobl køretøjets batteri, før du udfører elektrisk arbejde.
  • Sørg for, at alle forbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
  • Kontakt en kvalificeret tekniker, hvis du er usikker på nogen af ​​installationstrinnene.
  • Do not modify the headlamp in any way, as this may void the warranty and compromise safety.
  • Brug passende personlige værnemidler (PPE) under installationen.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • 1x Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B)
  • 1x Wiring Harness (if applicable, check product packaging)
  • 1x Brugsanvisning (dette dokument)

Opsætning og installation

  1. Forberedelse: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
  2. Remove Existing Headlamp: Carefully remove the bezel or retaining ring securing the existing 5 3/4" headlamp. Disconnect the wiring harness from the old headlamp.
  3. Install ProBEAM Headlamp: Connect the wiring harness of the ProBEAM LED headlamp to the vehicle's headlamp connector. Ensure the connection is secure.
  4. Secure Headlamp: Place the ProBEAM LED headlamp into the headlamp bucket. Reinstall the retaining ring or bezel to secure the headlamp på plads.
  5. Gentilslut batteri: Tilslut den negative pol på køretøjets batteri igen.
  6. Test funktionalitet: Turn on the vehicle's ignition and test the headlamp's low beam, high beam, and any integrated auxiliary functions (e.g., daytime running lights, if applicable).
  7. Sigter: Juster hovedetamp aim according to local regulations and for optimal visibility without blinding oncoming traffic. Refer to your vehicle's service manual for specific aiming procedures.

Note: Specific installation steps may vary depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions on removing and installing headlamps.

Betjeningsvejledning

The Custom Dynamics ProBEAM LED Headlamp operates in conjunction with your vehicle's existing headlamp switch. It features both low beam and high beam functions.

  • Nærlys: Activate your vehicle's low beam setting for standard illumination.
  • Fjernlys: Activate your vehicle's high beam setting for increased illumination when conditions permit.

The LED technology provides instant-on illumination and a crisp, clear light output. No special operating procedures are required beyond standard vehicle headlamp operation.

Opretholdelse

The Custom Dynamics ProBEAM LED Headlamp is designed for long-lasting performance with minimal maintenance.

  • Rensning: Rengør hovedetamp lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the lens.
  • Inspektion: Efterse med jævne mellemrum hovedlamp for any signs of damage, loose connections, or moisture ingress.
  • Udskiftning af pære: The LED elements are designed to last the lifetime of the product and are not user-replaceable. If the headlamp malfunctions, contact Custom Dynamics support.

Fejlfinding

ProblemMulig årsagLøsning
Headlamp lyser ikke
  • Løs eller forkert ledningsforbindelse
  • Sprunget sikring
  • Faulty vehicle headlamp skifte
  • Damaged headlamp enhed
  • Check all wiring connections and ensure they are secure.
  • Inspect and replace the vehicle's headlamp fuse if blown.
  • Test the vehicle's headlamp skifte.
  • Contact Custom Dynamics support for further assistance.
Headlamp flickers or is dim
  • Dårlig elektrisk forbindelse
  • Utilstrækkelig strømforsyning
  • Voltage udsving
  • Verify all connections are clean and tight.
  • Ensure the vehicle's electrical system is providing adequate voltage.
  • Consult a qualified technician to diagnose electrical system issues.
Fugt inde i linsen
  • Seal integrity compromised
  • Condensation (minor fogging is normal and should dissipate)
  • If significant moisture or water is present, contact Custom Dynamics support.
  • Allow minor condensation to dissipate naturally.

Specifikationer

FeatureDetalje
ModelnummerPB-575-B
Headlamp Størrelse5 3/4 tommer
LyskildeLED
FarveBlack (housing), Clear (lens)
Linse materialePolycarbonat
Speciel funktionHigh Beam functionality
Varens vægt2.25 pund
UPC644978545677

Garanti og support

For warranty information, technical support, or replacement parts, please contact Custom Dynamics directly. Refer to the official Custom Dynamics website for the most current warranty policy and contact details.

Custom Dynamics Contact Information:

  • Webwebsted: www.customdynamics.com
  • Phone: Refer to webhjemmeside for aktuelle kontaktnumre.
  • Email: Refer to webwebsted for nuværende kontakt-e-mail.

Relaterede dokumenter - PB-575-B

Preview Custom Dynamics ProBEAM 7" adaptiv LED-forlygteamp Installationsvejledning
Trin-for-trin installationsvejledning til Custom Dynamics ProBEAM 7" adaptiv LED-forlygteamp (Varenummer PB-7A14-B, PB-7A14-C) til Harley-Davidson motorcykler. Indeholder monteringsoplysninger og ledningsdiagrammer.
Preview Monteringsvejledning til Custom Dynamics Road Glide Shark Demon LED-forlygte
Detaljeret trin-for-trin installationsvejledning til Custom Dynamics Road Glide Shark Demon LED-forlygten (model SD-RG-WW) på Harley-Davidson Road Glide motorcykler. Indeholder pakkeindhold, kompatibilitets- og sikkerhedsoplysninger.
Preview Installationsvejledning til ProBEAM® sekventielle sadeltaske-LED-lys
Detaljeret installationsvejledning til Custom Dynamics ProBEAM® Sequential Saddlebag LED-lygter, der dækker pakkens indhold, montering af køretøjet, sikkerhedsforanstaltninger og trinvise monteringsinstruktioner til Harley-Davidson Touring-modeller.
Preview Installationsvejledning til Custom Dynamics Smart Triple Play - CD-TPU-SS-SS6
Detaljerede installationsvejledninger til Custom Dynamics Smart Triple Play-modulet (CD-TPU-SS-SS6). Lær, hvordan du installerer dette belastningsudligningsmodul sikkert og korrekt til din motorcykels baglygtesystem.
Preview Installationsvejledning til Custom Dynamics Magic Strobes-bremseblinklys
Detaljerede installationsvejledninger til Custom Dynamics Magic Strobes bremselysblinklys (modellerne MAGIC-STROBE-ISN og MAGIC-STROBE-ISP) til kompatible Indian motorcykelmodeller. Lær, hvordan du forbedrer bremselysets synlighed med forskellige strobemønstre.
Preview Installationsvejledning og ledningsdiagram til Custom Dynamics Magic Strobes-bremseblinklys
Detaljerede installationsvejledninger og ledningsføringsvejledning til Custom Dynamics Magic Strobes bremseblinklys (varenummer: MAGIC-STROBES-UNV). Lær, hvordan du installerer, vælger mønstre og foretager fejlfinding.