1. Introduktion
Tak for købetasing the DIGOO DG-8988 Digital Weather Station. This device provides comprehensive weather information, including indoor and outdoor temperature and humidity, weather forecasts, time, date, and alarm functions. Please read this manual carefully to ensure proper setup and operation.
2. Sikkerhedsoplysninger
- Udsæt ikke hovedenheden eller udendørssensoren for ekstreme temperaturer, direkte sollys eller fugt.
- Undgå at tabe enheden eller udsætte den for kraftige stød.
- Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret servicepersonale.
- Opbevar batterier utilgængeligt for børn. Bortskaf brugte batterier ansvarligt.
- The outdoor sensor is not waterproof; protect it from direct rain.
3. Pakkens indhold
Tjek venligst pakken for følgende varer:
- 1 x DG-8988 Weather Station (Main Unit)
- 1 x DG-8988 Outdoor Sensor
- 1 x USB-strømkabel
- 1 x Brugermanual (dette dokument)
4. Produktet er slutview
Familiarize yourself with the main unit and its components.
4.1 Main Unit Front View
Figur 1: Forside view of the DG-8988 Weather Station display.
The front features a large, colorful LCD screen divided into sections for easy readability:
- Vejrudsigt: Displays predicted weather conditions.
- Indendørs data: Viser den aktuelle indetemperatur og luftfugtighed.
- Udendørs data: Shows current outdoor temperature and humidity from the sensor.
- Solopgang og solnedgang: Displays sunrise and sunset times (city name function currently limited to Europe).
- Tid og kalender: Viser aktuel tid, dato og ugedag.
- Barometrisk tryk: Viser det aktuelle atmosfæriske tryk.
4.2 Main Unit Rear View og knapper
Figur 2: Bagside view med kontrolknapper.
The control buttons are located on the left side of the main unit:
- SÆT: Enters settings mode or confirms selections.
- OP: Adjusts values upwards or cycles through options.
- NED: Adjusts values downwards or cycles through options.
- ALARM: Enters alarm setting mode or activates/deactivates alarm.
- ALERT: Sets temperature/humidity alerts.
- HEAT/DEW: Toggles display of Heat Index and Dew Point.
4.3 Main Unit Side View
Figur 3: Side view showing the SNOOZE/LIGHT button.
On the top edge of the main unit, you will find the SNOOZE / LYS button, used to activate the backlight or snooze the alarm.
5. Opsætning
5.1 Strømforsyning til hovedenheden
- Insert 3 x AAA batteries (not included) into the battery compartment on the back of the main unit, observing correct polarity (+/-).
- Alternatively, connect the supplied USB power cable to the DC-POWER port (DC5.0V, 1A) on the main unit and plug it into a suitable USB power adapter (not included). The USB connection is recommended for continuous operation and display brightness.
5.2 Strømforsyning til udendørssensoren
- Åbn batterirummet på bagsiden af udesensoren.
- Insert 2 x AA batteries (not included), observing correct polarity (+/-).
- Luk batterirummet forsvarligt.
5.3 Sensorplacering
- Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain.
- Ensure the sensor is within the 98ft/30m transmission range of the main unit. Walls and other obstructions can reduce this range.
- Avoid placing the sensor near large metal objects or electronic devices that could interfere with the wireless signal.
5.4 Indledende synkronisering
After powering both units, the main unit will automatically attempt to connect with the outdoor sensor. The outdoor temperature and humidity should appear on the display within a few minutes. If not, press and hold the 'DOWN' button on the main unit to manually initiate a search for the outdoor sensor.
6. Betjeningsvejledning
6.1 Indstilling af tid og dato
- Press and hold the 'SET' button for 3 seconds to enter time setting mode. The hour digit will flash.
- Use the 'UP' or 'DOWN' buttons to adjust the hour.
- Press 'SET' to confirm and move to the next setting (minute, year, month, day, 12/24 hour format).
- Repeat steps 2 and 3 until all settings are complete. Press 'SET' again to exit setting mode.
6.2 Indstilling af alarmen
- Press the 'ALARM' button once to display the alarm time.
- Press and hold the 'ALARM' button for 3 seconds to enter alarm setting mode. The hour digit will flash.
- Use 'UP' or 'DOWN' to adjust the hour, then press 'ALARM' to confirm and move to minutes.
- Adjust minutes and press 'ALARM' to confirm.
- Press 'ALARM' repeatedly to toggle the alarm ON/OFF. An alarm icon will appear on the display when activated.
6.3 Snooze -funktion
When the alarm sounds, press the 'SNOOZE/LIGHT' button on top of the unit to activate the snooze function. The alarm will sound again after approximately 5 minutes.
6.4 Valg af temperaturenhed (°C/°F)
Briefly press the 'DOWN' button to switch between Celsius (°C) and Fahrenheit (°F) display for temperature.
6.5 Barometrisk trykvisning
The weather station displays barometric pressure in hPa/mb. The trend indicator shows whether the pressure is rising, falling, or stable, which contributes to the weather forecast.
6.6 Sunrise & Sunset Time Display
The unit displays sunrise and sunset times. Note: Currently, the city name display function for sunrise/sunset is only supported in European regions. Software upgrades are in progress to support global city names.
6.7 Indoor Comfort Display
The display includes an indoor comfort indicator (Dry, Comfort, Wet) based on current indoor temperature and humidity levels.
6.8 Varmeindeks og dugpunkt
Press the 'HEAT/DEW' button to cycle through the display of Heat Index and Dew Point values, providing additional environmental information.
7. Vedligeholdelse
- Rensning: Tør enheden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Udskiftning af batteri: Udskift batterierne i både hovedenheden og udendørssensoren, når indikatoren for lavt batteriniveau vises på displayet. Sørg for korrekt polaritet.
- Opbevaring: Hvis enheden opbevares i en længere periode, skal alle batterier fjernes for at forhindre lækage.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen aflæsning af udendørs temperatur/fugtighed. | Outdoor sensor out of range or batteries low/dead. | Relocate sensor closer to main unit. Replace sensor batteries. Press and hold 'DOWN' button on main unit to re-sync. |
| Forkert tidspunkt/dato. | Time not set correctly or power interruption. | Reset time and date as per Section 6.1. Ensure continuous power via USB if desired. |
| Skærmen er svag eller tom. | Main unit batteries low/dead or USB power disconnected. | Replace main unit batteries or connect USB power cable. |
| Weather forecast seems inaccurate. | Weather forecasts are based on barometric pressure trends and are estimates. | This is normal. The device provides a local forecast based on pressure changes, not a professional meteorological forecast. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | DIGOO |
| Model | DG-8988 |
| Indendørs temperaturområde | 0°C ~ 50°C (32°F ~ 122°F) |
| Udendørs temperaturområde | -40°C ~ 60°C (-40°F ~ 140°F) |
| Indendørs/udendørs luftfugtighedsområde | 1% RF ~ 99% RF |
| Barometer Range | 800 hPa/mb - 1100 hPa/mb |
| Trådløs transmissionsrækkevidde | Op til 30 m (98 fod) i fri luft |
| Hovedenhed strømforsyning | DC5.0V, 1A (USB connection) or 3 x AAA batteries (not included) |
| Outdoor Sensor Power Supply | 2 x AA batterier (medfølger ikke) |
| Display Type | HD LCD Color Screen |
| Særlige funktioner | Alarm with Snooze, Calendar, Weather Forecast, Barometric Display, Comfort Function, Sunrise/Sunset Times, Heat Index, Dew Point |
10. Garanti og support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support or warranty claims, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
