1. Introduktion
Thank you for choosing the ADATA SU650 Series Solid State Drive. This manual provides essential information for the proper installation, operation, and maintenance of your new SSD. The ADATA SU650 240GB Internal SSD is designed to significantly enhance your computer's performance, offering superior transfer speeds compared to traditional hard disk drives. Its solid-state technology ensures increased durability and quiet operation, making it an excellent choice for upgrading your system.
2. Produktet er slutview
The ADATA SU650 SSD utilizes 3D NAND Flash technology, providing high capacity, improved efficiency, and enhanced reliability. It features a high-speed SATA III interface, delivering fast read/write performance for quicker system boot-ups and application loading.

Figur 2.1: Forside view of the ADATA SU650 Solid State Drive.
3. Nøglefunktioner
- 3D NAND Flash Technology: Offers higher capacity, efficiency, and reliability compared to 2D NAND SSDs.
- High-Speed SATA III Interface: Provides read/write speeds up to 520/450MB/s for rapid data transfer.
- SLC Caching: Boosts performance by operating in single-level cell mode.
- Advanced Error Correction Technologies: Ensures data integrity and extends the lifespan of the SSD.
- Stille drift: Absence of moving parts results in silent performance.
- Increased Durability: More resistant to shock and vibration than traditional HDDs.

Figure 3.1: Illustration highlighting 3D NAND Flash technology.
4. Opsætning og installation
The ADATA SU650 SSD is compatible with most desktop computers and laptops that support a 2.5-inch SATA drive.
4.1 Før installation
- Back up all important data from your existing drive.
- Sørg for, at dit system er slukket og frakoblet strømkilden.
- Ground yourself to prevent electrostatic discharge (ESD).
- Gather necessary tools: screwdriver, SATA data cable, SATA power cable (if not already available).
4.2 Installationstrin (generelt)
- Open your computer case or laptop bay.
- Locate an available 2.5-inch drive bay. If replacing an existing HDD, remove the old drive.
- Slide the ADATA SU650 SSD into the drive bay and secure it with screws if necessary.
- Tilslut et SATA-datakabel fra SSD'en til en ledig SATA-port på dit bundkort.
- Tilslut et SATA-strømkabel fra din strømforsyning (PSU) til SSD'en.
- Close your computer case or laptop bay.
- Tilslut strømmen igen, og start dit system.

Figure 4.1: The compact 2.5-inch form factor of the ADATA SU650 SSD, ready for installation.
5. Betjening af din SSD
After physical installation, your operating system will need to recognize and prepare the new drive.
5.1 Initializing and Formatting (New Drive)
If this is a new SSD, you will need to initialize and format it before use.
- Windows: Open Disk Management (right-click Start button > Disk Management). Locate the new SSD, right-click it, and select "Initialize Disk." Choose MBR or GPT (GPT is recommended for modern systems). Then, right-click the unallocated space and select "New Simple Volume" to format it.
- MacOS: Open Disk Utility (Applications > Utilities > Disk Utility). Select the new SSD, click "Erase," choose a format (e.g., APFS or Mac OS Extended), and a scheme (e.g., GUID Partition Map).
- Linux: Brug værktøjer som GParted eller
fdisk/mkfsfrom the terminal to partition and format the drive.
5.2 Data Migration and Management
ADATA provides free data management software to help with data migration and optimization. This software can assist in cloning your existing operating system to the new SSD or managing its performance.

Figure 5.1: ADATA's free data management software simplifies data migration and backup processes.
6. Vedligeholdelse
SSDs generally require less maintenance than traditional HDDs. However, following these practices can help ensure optimal performance and longevity:
- Hold firmware opdateret: Periodically check the ADATA website for firmware updates for your SU650 SSD. Firmware updates can improve performance, stability, and compatibility.
- Aktivér TRIM: Ensure TRIM is enabled in your operating system. TRIM helps the SSD manage its data more efficiently, preventing performance degradation over time. Modern operating systems typically enable this by default.
- Undgå fuld kapacitet: Try to avoid filling the SSD to its absolute maximum capacity. Leaving some free space (e.g., 10-15%) allows the SSD's wear-leveling algorithms to function optimally.
- Regelmæssige sikkerhedskopier: While SSDs are reliable, no storage device is immune to failure. Regularly back up your important data to another drive or cloud storage.
- Undgå defragmentering: Do not defragment an SSD. Defragmentation is designed for HDDs and can reduce the lifespan of an SSD without providing any performance benefit.
7. Fejlfinding
If you encounter issues with your ADATA SU650 SSD, consider the following troubleshooting steps:
- SSD ikke fundet:
- Check SATA data and power cable connections. Ensure they are securely plugged into both the SSD and the motherboard/PSU.
- Try a different SATA port on your motherboard.
- Verify that the SATA controller mode in your BIOS/UEFI is set to AHCI (not IDE).
- Test the SSD in another computer if possible to rule out a system-specific issue.
- Langsom ydeevne:
- Ensure TRIM is enabled (as mentioned in Maintenance section).
- Kontroller, om SSD'en er tilsluttet en SATA III-port (6 Gb/s). Tilslutning til en ældre SATA II-port (3 Gb/s) vil begrænse ydeevnen.
- Kontroller, at dit operativsystem og dine drivere er opdaterede.
- Ensure the SSD is not excessively full.
- Run a diagnostic tool (e.g., ADATA SSD Toolbox, if available) to check the drive's health and performance.
- Systemustabilitet/nedbrud:
- Sørg for, at dit systems strømforsyning er tilstrækkelig og stabil.
- Check for any loose connections within your computer.
- Kør en hukommelsesdiagnose for at udelukke RAM-problemer.
- Consider reinstalling your operating system if other solutions fail, after backing up your data.
Hvis disse trin ikke løser dit problem, bedes du se afsnittet Garanti og support for yderligere assistance.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | ASU650SS-240GT-C |
| Kapacitet | 240 GB |
| Interface | SATA III 6Gb/s (backward compatible with SATA II 3Gb/s) |
| NAND Flash | 3D NAND |
| Formfaktor | 2.5 tommer |
| Dimensioner (L x B x H) | 2.75 x 3.94 x 0.28 tommer (69.85 x 100.45 x 7 mm) |
| Vægt | 1.41 ounce (40 g) |
| Driftstemperatur | 0°C til 70°C |
| Opbevaringstemperatur | -40°C til 85°C |
| Stødmodstand | 1500G/0.5ms |
| Vibrationsmodstand | 10~2000Hz/1.5mm (Ikke i drift) |
| Strømforbrug | (Details vary by capacity, typically low for SSDs) |
| MTBF (Mean Time Between Failures) | 2,000,000 timer |
9. Garanti og support
The ADATA SU650 SSD comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
For technical support, warranty claims, or to download the latest drivers and firmware, please visit the official ADATA webwebsted eller kontakt deres kundeservice.
ADATA Officiel Webwebsted: www.adata.com
You can also find more information and support resources on the ADATA store page: ADATA Amazon Store.
10. Sikkerhedsoplysninger
- Always handle the SSD with care to avoid physical damage.
- Protect the SSD from extreme temperatures, humidity, and direct sunlight.
- Do not attempt to disassemble or modify the SSD, as this will void the warranty and may cause damage.
- Keep the SSD away from strong magnetic fields.
- Dispose of electronic waste responsibly according to local regulations.





