Denon DP-450USB halvautomatisk analog pladespiller brugsanvisning

Indledning

This manual provides essential information for the proper setup, operation, and maintenance of your Denon DP-450USB Semi-Automatic Analog Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

1. Opsætning

1.1 Udpakning og komponentidentifikation

Fjern forsigtigt alle komponenter fra emballagen. Sørg for, at alle nedenstående dele er til stede:

• Pladespiller enhed
• Støvdæksel
• USB kabel
• Strømadapter
• Platter
• Drive Belt (pre-installed or separate)
• Modvægt
• Headshell with Cartridge (pre-mounted)
• 45 omdr./min. Adapter

1.2 Placering

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

1.3 Montering af plade og bånd

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt (if not pre-installed) and stretch it around the inner rim of the platter and over the motor pulley.

1.4 Opsætning af tonearm og pickuppe

The DP-450USB typically comes with a pre-mounted cartridge. Follow these steps for tonearm balancing:

1. Fjern stylus-beskytteren.
2. Lås tonearmen op fra dens hvileposition.
3. Adjust the counterweight by rotating it until the tonearm is balanced and floats horizontally.
4. Set the tracking force according to the cartridge manufacturer's specifications (typically 1.8g for the included cartridge).
5. Juster anti-skating-drejeknappen, så den passer til indstillingen af ​​sporingskraften.

1.5 Montering af støvdæksel

Attach the dust cover hinges to the designated slots on the rear of the turntable. The unique design allows the dust cover to double as a display stand for album covers.

Image: Denon DP-450USB with its removable dust cover positioned to display an album jacket.

1.6 Tilslutning til et lydsystem

The DP-450USB offers multiple connectivity options:

• Analog udgang (RCA): Connect the RCA cables from the turntable's 'PHONO OUT' to your amplifier's phono input. If your amplifier lacks a phono input, use the built-in phono equalizer by setting the 'EQUALIZER' switch to 'ON'.
• USB-udgang: Connect the USB cable to your computer for digitizing vinyl records.

Image: Rear panel of the Denon DP-450USB, highlighting the RCA audio outputs, ground terminal, USB-A port, and power input.

2. Betjeningsvejledning

2.1 Tænd/sluk

To power on the turntable, rotate the power knob. The platter will begin to spin. To power off, rotate the knob to the 'OFF' position.

2.2 Afspilning af en plade

1. Læg en plade på fadet.
2. Vælg den passende hastighed (33 1/3, 45 eller 78 o/min) ved hjælp af hastighedsvælgeren.
3. Press the 'START' button. The tonearm will automatically lift, move to the beginning of the record, and gently lower the stylus onto the groove.
4. At the end of the record, the tonearm will automatically lift and return to its rest, and the platter will stop spinning.

2.3 hastighedsvalg

The DP-450USB supports three playback speeds: 33 1/3 RPM (for LPs), 45 RPM (for singles), and 78 RPM (for vintage shellac records). Use the selector switch to choose the correct speed for your record.

Billede: Overhead view of the Denon DP-450USB turntable, displaying the platter, tonearm, and speed selection controls.

2.4 USB-optagelse

To digitize your vinyl collection, connect the turntable to your computer via the USB-A port. Use compatible recording software (e.g., MusiCut for PC) to capture audio in MP3 or WAV formats.

2.5 Bluetooth-forbindelse (hvis relevant)

While the DP-450USB model does not feature built-in Bluetooth, some variants of Denon turntables offer this functionality. If you have a Bluetooth-enabled Denon turntable, refer to its specific instructions for pairing with compatible devices.

3. Vedligeholdelse

3.1 Rengøring af pennen

Gently brush the stylus from back to front using a soft brush designed for stylus cleaning. Avoid touching the stylus with your fingers.

3.2 Rengøring af drejeskiven

Wipe the turntable chassis and platter with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners or solvents.

3.3 Vedligeholdelse af støvdæksel

Clean the dust cover with a soft, lint-free cloth. Use a mild, non-abrasive cleaner if necessary. Avoid harsh chemicals that can scratch or cloud the plastic.

4. Fejlfinding

• Ingen lyd: Check all cable connections (RCA, power). Ensure the phono equalizer switch is set correctly (ON if connecting to a line-level input, OFF if connecting to a phono input). Verify amplifier and speaker settings.
• Springning eller forvrængning: Check if the record is clean and free of dust. Verify tonearm balance, tracking force, and anti-skating settings. Ensure the turntable is on a stable, level surface.
• Forkert hastighed: Confirm the speed selector switch is set to the correct RPM for the record being played.
• Problemer med USB-optagelse: Ensure the USB cable is securely connected and your recording software is correctly configured to recognize the turntable as an audio input device.

For further assistance, please refer to the comprehensive troubleshooting guide on the Denon support webwebsted eller kontakt kundeservice.

5. Specifikationer

6. Garanti og support

Your Denon DP-450USB turntable is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, service, or warranty claims, please visit the official Denon website or contact Denon customer service directly.