Supermicro MBD-X11SCA-FO bundkort brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro MBD-X11SCA-F-O motherboard. Designed for server and workstation applications, this motherboard supports Intel 8th/9th Generation Core i9/i7/i5/i3/Pentium/Celeron and Intel Xeon E Processors, offering robust performance and reliability. Please read this manual thoroughly before proceeding with installation.

2. Funktioner

• Processor support: Single Socket H4 (LGA 1151) for Intel 8th/9th Generation Core i9/i7/i5/i3/Pentium/Celeron and Intel Xeon E Processors (Coffee Lake-S), with CPU TDP support up to 95W.
• Chipsæt: Intel C246.
• Hukommelse: DDR4 ECC/Non-ECC UDIMM, up to 64GB across 4 DIMM slots.
• Opbevaring: 8x SATA3 (6Gbps) ports via Intel C246 controller, supporting RAID 0, 1, 5, 10.
• Udvidelsespladser: Multiple PCI-Express 3.0 slots for various expansion cards.
• Integreret grafik: Onboard graphics with VGA output.
• Netværk: Dual Gigabit Ethernet LAN ports.
• Ledelse: Integrated Platform Management Interface (IPMI) for remote management.
• Formfaktor: ATX.

3. Pakkens indhold

Verify that all items are present and in good condition. If any items are damaged or missing, contact your vendor.

• Supermicro MBD-X11SCA-F-O Motherboard
• I / O-skjold
• SATA kabler
• Hurtig referencevejledning
• Driver CD/DVD

4. Opsætning

4.1. Komponentinstallation

Before installing any components, ensure the motherboard is placed on a non-conductive surface and you are grounded to prevent electrostatic discharge (ESD).

En overhead view of the Supermicro MBD-X11SCA-F-O motherboard, showcasing its various components including the CPU socket, RAM slots, PCIe slots, SATA ports, and I/O panel.

4.1.1. CPU-installation

1. Åbn CPU-sokkelhåndtaget, og løft belastningspladen.
2. Juster forsigtigt CPU'en med soklen, og sørg for, at den gyldne trekant på CPU'en matcher trekanten på soklen. Tving ikke CPU'en ind i soklen.
3. Sænk lastpladen, og fastgør den med håndtaget.
4. Påfør termisk pasta på CPU'en, og installer CPU-køleren i henhold til producentens anvisninger.

4.1.2. Installation af hukommelse (RAM)

1. Åbn klipsene i begge ender af DIMM-stikket.
2. Juster hakket på DDR4-hukommelsesmodulet med nøglen i DIMM-stikket.
3. Insert the module firmly until the clips snap into place. For optimal performance, install memory in matched pairs for dual-channel operation.

4.1.3. Installation af lagerenhed

• Tilslut SATA-datakabler fra dine lagerdrev (harddiske/SSD'er) til SATA-portene på bundkortet.
• Ensure power cables are connected to your storage devices from the power supply.

4.1.4. Installation af udvidelseskort

1. Locate an available PCI-Express slot.
2. Remove the corresponding expansion slot cover from your chassis.
3. Insert the expansion card firmly into the slot until it is seated correctly.
4. Secure the card with a screw or retention clip.

4.2. Strømforbindelser

• Connect the 24-pin ATX main power connector from your power supply to the corresponding header on the motherboard.
• Connect the 8-pin EPS/CPU power connector to the CPU power header.

4.3. Tilslutninger på frontpanelet

Connect the cables from your chassis's front panel (power button, reset button, HDD LED, power LED, USB ports, audio ports) to the corresponding headers on the motherboard. Refer to the motherboard's silkscreen labels for correct pin assignments.

5. Betjening

5.1. Første opstart og BIOS/UEFI-opsætning

1. Når du har samlet systemet, skal du tilslutte en skærm, et tastatur og en mus.
2. Power on the system. During POST (Power-On Self-Test), press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility.
3. Configure boot order, date/time, and other system settings as required. Save changes and exit.

5.2. Installation af operativsystem

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install the operating system. After installation, install all necessary drivers from the provided driver CD or Supermicro's official webwebsted.

5.3. IPMI Remote Management

The MBD-X11SCA-F-O features Integrated Platform Management Interface (IPMI), allowing for remote monitoring and management of the system, even when the operating system is not running. Connect a dedicated LAN cable to the IPMI port and configure network settings via the BIOS/UEFI or IPMI web interface.

6. Vedligeholdelse

• Fjernelse af støv: Regularly clean dust from the motherboard and components using compressed air to ensure proper airflow and prevent overheating.
• BIOS-opdateringer: Periodically check the Supermicro website for BIOS/UEFI updates. Updates can improve stability, add support for new hardware, or fix bugs. Follow the provided instructions carefully when performing a BIOS update, often involving a USB drive.
• Tilslutningstjek: Periodically verify that all cables (power, data, expansion cards) are securely connected.

7. Fejlfinding

7.1. No Power / No POST

• Ensure the power supply is connected correctly to the motherboard (24-pin ATX and 8-pin EPS).
• Verify the power supply is switched on and functioning.
• Check that the CPU is correctly seated and the CPU cooler is properly installed.
• Genindsæt RAM-modulerne. Prøv at starte med kun ét RAM-modul installeret.
• Disconnect all non-essential peripherals and expansion cards to isolate the issue.

7.2. Operativsystemet starter ikke

• Kontrollér opstartsrækkefølgen i BIOS/UEFI-indstillingerne for at sikre, at det korrekte drev er valgt.
• Verify that the storage drive containing the operating system is properly connected and detected by the BIOS/UEFI.
• If recently installed, ensure all necessary drivers are loaded.

7.3. Komponent ikke fundet

• For RAM, ensure modules are fully seated in their slots.
• For expansion cards, ensure they are correctly inserted into the PCIe slot and secured.
• For SATA devices, check both data and power cable connections.
• Consult the full motherboard manual for specific troubleshooting steps or beep codes.

8. Specifikationer

9. Garanti og support

Supermicro products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product or visit the official Supermicro website. For technical support, driver downloads, and further documentation, please visit the Supermicro support portal.

Supermicro Support: https://www.supermicro.com/support