1. Produktet er slutview
Thank you for choosing the SEBSON LED Under Cabinet Light. This instruction manual provides essential information for the safe and efficient use of your new lighting product. This LED light bar is designed for versatile indoor applications, offering bright, neutral white illumination with a slim profile til diskret installation.
- Mærke: SEBSON
- Model: S-101009 (50cm)
- Nøglefunktioner: Integrated LED module, slim design (13mm high, 24mm wide), neutral white light (4000K), 700lm, 8W, 230V, IP20.
- Ansøgninger: Ideal for kitchens, cabinets, shelves, and other indoor furniture.
2. Sikkerhedsinstruktioner
Læs venligst disse sikkerhedsinstruktioner omhyggeligt inden installation og brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.
- Elektrisk sikkerhed: Always disconnect the power supply before installation, maintenance, or cleaning. Installation should only be performed by qualified personnel if you are unsure about electrical wiring.
- Kun indendørs brug: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water. Do not use in damp miljøer eller udendørs.
- Voltage: Sørg for, at strømforsyningen voltage matches the product's requirement (230V).
- Ikke-dæmpbar: This LED light is not dimmable. Do not connect it to a dimmer switch, as this may damage the product.
- Varme: Do not cover the light bar during operation to prevent overheating.
- Skade: Do not use the product if the cable or housing is damaged.
3. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- 1 x SEBSON LED Under Cabinet Light (50cm)
- 2 x monteringsskruer
4. Opsætning og installation
Follow these steps to install your SEBSON LED Under Cabinet Light:
- Pakker ud: Fjern forsigtigt alle komponenter fra emballagen.
- Vælg placering: Select a suitable, dry indoor location for mounting, such as under a kitchen cabinet, shelf, or inside a wardrobe. Ensure there is a 230V power outlet nearby.
- Markér borepunkter: Hold the LED light bar in the desired mounting position. Use a pencil to mark the locations for the two mounting screws.
- Bore huller: Drill small pilot holes at the marked points. Ensure the drill bit size is appropriate for the provided screws.
- Monter lysstangen: Align the light bar with the drilled holes and secure it firmly using the two provided screws.
- Tilslut til strøm: Plug the light bar's power cable into a standard 230V electrical outlet.
5. Betjeningsvejledning
The SEBSON LED Under Cabinet Light is simple to operate:
- Once plugged into a 230V power outlet, use the integrated switch located on the light bar to turn the light ON or SLUKKET.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your LED light bar, follow these maintenance guidelines:
- Rensning: Disconnect the power supply before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the light bar. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspektion: Periodically check the power cable and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
- Ingen dele, der kan serviceres af brugeren: The LED module is integrated and not designed to be replaced by the user. Do not attempt to open or repair the light bar.
7. Fejlfinding
If you encounter issues with your LED light bar, refer to the following troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. | Check if the power plug is securely inserted into the outlet. Test the outlet with another device to ensure it is functional. |
| Afbryderen er OFF. | Ensure the integrated switch on the light bar is in the ON position. | |
| Lyse flimrer. | Ustabil strømforbindelse. | Ensure the power plug is firmly connected. Avoid connecting to outlets with fluctuating power. |
| Inkompatibel lysdæmper. | This light is non-dimmable. Ensure it is not connected to a dimmer switch. |
If the problem persists after attempting these solutions, please contact SEBSON customer support for further assistance.
8. Specifikationer
Detailed technical specifications for the SEBSON LED Under Cabinet Light (Model S-101009):
- Mærke: SEBSON
- Modelnummer: S-101009 (UNDER_LED_50)
- Dimensioner (L x B x H): 50 x 2.4 x 1.35 cm
- Vægt: 138 gram
- Strømforbrug: 8 watt
- Voltage: 230 volt
- Lysstrøm: 700 lm
- Farvetemperatur: 4000 Kelvin (Neutral hvid)
- farvegengivelsesindeks (CRI): > 80 Ra
- Strålevinkel: 110°
- Gennemsnitlig levetid: 15,000 timer
- IP-vurdering: IP20 (kun indendørs brug)
- Materiale: Plast
- Skift stil: Integrated rocker switch
- Særlige funktioner: Kan ikke dæmpes
- Komponenter inkluderet: 1 x LED light bar, 2 x mounting screws
9. Garanti og support
This SEBSON product is covered by a standard manufacturer's warranty. Please refer to the specific terms and conditions provided at the time of purchase or on the official SEBSON website for details regarding warranty duration and coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official SEBSON website. When contacting support, please have your product model number (S-101009) and proof of purchase readily available.
