1. Introduktion
The Behringer ULTRALINK PRO MX882 V2 is an ultra-flexible 8-channel splitter/mixer designed for professional audio applications. This versatile unit can operate independently in either mixer or splitter mode, providing solutions for signal distribution, level matching, and mixing. Its robust design ensures high signal integrity and reliable performance in various live and studio environments.
This manual provides essential information for the safe and efficient operation of your MX882 V2. Please read it thoroughly before use and retain it for future reference.
Figur 1.1: Front view of the Behringer ULTRALINK PRO MX882 V2. This image displays the front panel with all controls and indicators, including input/output level meters, channel level knobs, balance/pan controls, and mode switches.
2. Vigtige sikkerhedsinstruktioner
For at mindske risikoen for elektrisk stød, brand eller skade på enheden, bedes du overholde følgende sikkerhedsforanstaltninger:
- Læs disse instruktioner.
- Gem disse instruktioner.
- Overhold alle advarsler.
- Følg alle instruktioner.
- Brug ikke dette apparat i nærheden af vand.
- Rengør kun med en tør klud.
- Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
- Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af vognen/apparatet for at undgå skader ved at vælte.
- Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
3. Nøglefunktioner
The ULTRALINK PRO MX882 V2 offers a range of features designed for audio signal management:
- Each channel can operate independently in mixer or splitter mode.
- Extremely wide bandwidth for highest signal integrity.
- Usable as a six-in/six-out level matching amplifier or direct injection box.
- Ultra-low noise operation ensures clean audio.
- Versatile 8-channel configuration for various audio routing needs.
4. Opsætning
4.1 Udpakning
Carefully unpack your MX882 V2 and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. Retain the packing materials for future shipping.
4.2 Rackmontering
The MX882 V2 is designed for standard 19-inch rack mounting. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.
4.3 Strømtilslutning
Connect the supplied AC power cord to the rear panel AC INLET and then to a suitable power outlet. Ensure the power switch on the front panel is in the OFF position before connecting. The unit operates on standard line voltage som angivet på bagpanelet.
Figur 4.1: Rear panel of the Behringer ULTRALINK PRO MX882 V2, showing the AC power inlet and various audio input/output connectors.
5. Betjening
5.1 Kontrol og indikatorer på frontpanelet
The front panel of the MX882 V2 provides all necessary controls for configuring and monitoring your audio signals.
Figur 5.1: Detaljeret view of the MX882 V2 front panel, highlighting individual channel controls and LED meters.
- INPUT LEVEL / OUTPUT LEVEL LEDs: These multi-segment LED meters display the signal level for the main input/output and individual channels. Aim for levels that illuminate green, occasionally touching yellow, to avoid clipping (red).
- HOVED INPUT NIVEAU: Adjusts the overall input level when operating in mixer mode.
- HOVED OUTPUT NIVEAU: Adjusts the overall output level when operating in mixer mode.
- CHANNEL LEVEL: Controls the output level for each individual channel.
- BALANCE / PAN: In mixer mode, this knob controls the stereo pan position for the channel. In splitter mode, it controls the balance between the two outputs for that channel.
- SPLIT / MIX Switch: This button toggles the operating mode for each channel. When engaged (LED lit), the channel operates in Splittertilstand. When disengaged, it operates in Mixertilstand.
- Afbryderen: Tænder eller slukker for enheden.
5.2 Mixer Mode (Channels 1-6)
In Mixer Mode, the MX882 V2 functions as a 6-input, 2-output line mixer. Each of the six channels can accept an input signal, which is then mixed down to the main stereo outputs (MAIN OUT L/R).
- Sørg for SPLIT / MIX switch for the desired channel is disengaged (LED off).
- Connect your audio source to the corresponding HAGE (1-6) on the rear panel.
- Juster KANALNIVEAU knob to set the individual channel's volume.
- Brug BALANCE / PAN knob to position the channel's signal within the stereo field of the main outputs.
- Overvåg INPUT NIVEAU og OUTPUT NIVEAU LEDs to prevent clipping.
5.3 Splitter Mode (Channels 1-6)
In Splitter Mode, the MX882 V2 takes a single input signal and distributes it to two separate outputs for each channel. This is useful for sending a signal to multiple destinations, such as a main PA system and a monitor mix.
- Engager SPLIT / MIX switch for the desired channel (LED on).
- Connect your audio source to the corresponding HAGE (1-6) on the rear panel.
- The input signal will be routed to both CH OUT (1-6) and MAIN OUT L/R (hvis tilsluttet).
- De BALANCE / PAN knob now functions as a balance control, allowing you to adjust the relative levels of the two outputs for that channel.
- Juster KANALNIVEAU knob to control the overall output level for the split signal.
6. Forbindelser
The rear panel of the MX882 V2 features various input and output connectors. Always ensure the unit is powered off before making or changing connections.
Figur 6.1: Rear panel showing all input and output connectors, including XLR and 1/4" TRS jacks.
- AC INDTAG: Standard IEC connector for the power cord.
- MAIN IN L/R: Balanced XLR inputs for the main stereo signal when in mixer mode.
- MAIN OUT L/R: Balanced XLR outputs for the main stereo signal. These outputs carry the mixed signal in mixer mode or the split signal in splitter mode.
- CH 1-6 IN: Balanced XLR inputs for individual channels.
- CH 1-6 OUT: Balanced XLR outputs for individual channels. These outputs carry the split signal in splitter mode.
- CH 7-8 IN / OUT: These channels feature 1/4" TRS inputs and outputs, providing additional flexibility for line-level signals. They can also operate in mixer or splitter mode.
7. Vedligeholdelse
The Behringer ULTRALINK PRO MX882 V2 requires minimal maintenance to ensure long-term performance.
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de indvendige komponenter.
- Ventilation: Ensure that the ventilation openings are not obstructed. Proper airflow is crucial for preventing overheating.
- Opbevaring: Hvis enheden opbevares i en længere periode, skal den afbrydes fra strømmen og opbevares et tørt og støvfrit miljø.
- Service: All servicing should be performed by qualified service personnel. Do not attempt to open the unit or perform repairs yourself.
8. Fejlfinding
If you encounter issues with your MX882 V2, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Power off; incorrect connections; level knobs turned down; incorrect mode. | Check power switch and cable; verify all audio cables are correctly connected; ensure all relevant LEVEL knobs are up; confirm correct SPLIT/MIX mode for each channel. |
| Forvrænget lyd | Input/output levels too high (clipping); faulty cables. | Reduce input/output levels to prevent red LED illumination; check and replace cables if necessary. |
| Brummen eller støj | Jordsløjfe; defekte kabler; interferens fra andet udstyr. | Ensure all equipment is properly grounded; use balanced cables where possible; try isolating the MX882 V2 from other electrical devices. |
| Channel not working | Incorrect mode; faulty cable; channel level down. | Check SPLIT/MIX switch for the channel; test with a different cable; ensure channel LEVEL knob is adjusted. |
If the problem persists after trying these steps, please contact Behringer customer support or a qualified service technician.
9. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Model | MX882 |
| Antal kanaler | 8 |
| Forbindelsesteknologi | XLR, 6,3 mm TRS |
| Varens vægt | 3.74 pund (1.7 kilo) |
| Produktdimensioner | 19.02 x 5.87 x 1.73 tommer |
| Strømkilde | Elektrisk med ledning |
| Dato først tilgængelig | 18. oktober 2018 |
10. Garanti og support
For detailed warranty information and terms and conditions, please refer to the official Behringer website or the warranty card included with your product. Technical support is available through authorized Behringer service centers and online resources.
You can find further assistance and contact information on the Behringer Store on Amazon or the official Behringer webwebsted.
