Einhell batteridrevet slagboremaskine brugermanual

Indledning

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell Cordless Impact Drill. Please read this manual thoroughly before using the tool and keep it for future reference.

Image: The Einhell Cordless Impact Drill, featuring its red and black design, with the detachable 12V Lithium-Ion battery and the charging unit placed alongside it. This image showcases the main components included with the drill.

Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af værktøjet:

• Bær passende personlige værnemidler, herunder sikkerhedsbriller, høreværn og handsker.
• Ensure the workpiece is securely fastened before drilling or screwing.
• Hold arbejdsområdet rent og godt oplyst.
• Brug ikke værktøjet i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener et elværktøj.
• Frakobl batteripakken fra værktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.

Komponenter overview

Familiarize yourself with the main parts of your Einhell Cordless Impact Drill:

• 1. Chuck: Used to hold drill bits and screwdriver bits.
• 2. Torque Setting Ring: Adjusts the torque for screwdriving applications.
• 3. Mode Selector Ring: Switches between drilling, impact drilling, and screwdriving modes.
• 4. Speed Selector Switch: Selects between two speed gears (high/low).
• 5. Forward/Reverse Switch: Ændrer rotationsretningen.
• 6. Trigger Switch: Aktiverer boremaskinen og styrer hastigheden.
• 7. LED arbejdslys: Oplyser arbejdsområdet.
• 8. Battery Pack: Removable 12V Lithium-Ion battery.
• 9. Battery Release Button: Frigør batteripakken fra værktøjet.
• 10. Oplader: Til genopladning af batteripakken.

Image: A person wearing safety glasses and gloves, demonstrating the use of the Einhell Cordless Impact Drill on a concrete block. This illustrates the tool's application in a typical work environment.

Opsætning

Opladning af batteriet

Before first use, fully charge the battery pack. The charger is designed for the 12V Lithium-Ion batteries supplied with this tool.

1. Tilslut opladeren til en passende stikkontakt.
2. Skub batteripakken ind i opladeren, indtil den klikker på plads.
3. The charging indicator light on the charger will show the charging status.
4. Når det er fuldt opladet, skal du frakoble batteriet fra opladeren.

Isætning/fjernelse af batteripakken

• To insert: Align the battery pack with the base of the drill handle and slide it in until it clicks securely.
• To remove: Press the battery release button and slide the battery pack out.

Installing/Removing Drill Bits

• Drej spændepatronen mod uret for at åbne kæberne.
• Sæt borehovedet eller skruetrækkerhovedet helt ind i patronen.
• Drej borepatronen med uret for at stramme kæberne sikkert omkring boret. Sørg for, at boret er centreret.
• To remove, rotate the chuck counter-clockwise.

Betjeningsvejledning

Selecting Operating Mode and Torque

• Skruetrækningstilstand: Rotate the mode selector ring to the screw symbol. Adjust the torque setting ring (1-22) based on the material and screw size. Lower settings for smaller screws/softer materials, higher for larger screws/harder materials.
• Boretilstand: Rotate the mode selector ring to the drill symbol. This mode provides maximum torque without clutch engagement.
• Slagboretilstand: Rotate the mode selector ring to the hammer symbol. Use this mode for drilling into masonry, concrete, or brick.

Hastighedskontrol

• Use the speed selector switch to choose between Gear 1 (low speed, high torque for screwdriving and large diameter drilling) and Gear 2 (high speed, lower torque for small diameter drilling).
• The trigger switch allows for variable speed control. Pressing it further increases the speed.

Fremad/bagud rotation

Push the forward/reverse switch to the left for forward rotation (screwing in, drilling) and to the right for reverse rotation (unscrewing, removing bits).

LED arbejdslys

The integrated LED light automatically illuminates the work area when the trigger is pressed, providing better visibility in dimly lit spaces.

Opretholdelse

• Rensning: Hold ventilationsåbningerne rene for at forhindre overophedning. Brug en blød, tøramp klud til at rengøre værktøjet casing. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the tool and accessories in a dry, dust-free place, out of reach of children. Remove the battery pack from the tool before storage.
• Batteripleje: For optimal battery life, store batteries in a cool, dry place and charge them periodically if not used for extended periods.

Fejlfinding

Specifikationer

Garanti og support

Your Einhell Cordless Impact Drill is covered by a standard return policy. For specific warranty details and support, please refer to your purchase documentation or contact Einhell customer service.

You can also visit the official Einhell store for more information and product support: Einhell Butik