1. Introduktion
This manual provides essential information for the safe and efficient operation of your Behringer NX3000D Ultra-Lightweight 3000 Watt Class-D Power Amplifier. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Nøglefunktioner:
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (Bridge mode).
- Weighs less than 7.9 lbs / 3.6 kg, ensuring portability.
- Features revolutionary cool-running high-density Class-D technology for ultimate reliability and near-zero thermal buildup.
- Equipped with an ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
- Højtydende DSP og 24-bit/96 kHz konvertere giver ultimativ signalintegritet og ekstremt dynamisk område.
- DSP-sektionen inkluderer sofistikeret delay, crossover (3 filtertyper, op til 48 dB/oktav), EQ (8 parametriske, 2 dynamiske), dynamikbehandling og låsbare sikkerhedsindstillinger.
2. Vigtige sikkerhedsinstruktioner
Følg altid disse grundlæggende sikkerhedsforanstaltninger, når du bruger din amplivligere:
- Læs disse instruktioner.
- Gem disse instruktioner.
- Overhold alle advarsler.
- Følg alle instruktioner.
- Brug ikke dette apparat i nærheden af vand.
- Rengør kun med en tør klud.
- Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
- Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af vognen/apparatet for at undgå skader ved at vælte.
- Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
3. Hvad er der i æsken
Upon unpacking your Behringer NX3000D, ensure all items listed below are present and in good condition:
- Behringer NX3000D 3000W Ultra-Lightweight Class-D Power Amplivligere
- Strømkabel
- Quick Start Guide (this document serves as the comprehensive manual)
Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.
4. Produktet er slutview
Familiarize yourself with the front and rear panels of your NX3000D amplivligere.
4.1 Frontpanel
Billede: Forside view of the Behringer NX3000D Power Amplifier, showing the main display, control knobs for channels A and B, and status indicators.
Billede: Vinklet front view of the Behringer NX3000D Power Amplifier, highlighting the rack-mountable design and ventilation grilles.
- Power knap: Drejer amplivligere til eller fra.
- Level Controls (CH A/CH B): Juster indgangsfølsomheden for hver kanal.
- LCD-skærm: Shows DSP settings, operating modes, and status information.
- Navigation Buttons (SETUP, PROCESS, UP/DOWN, EXIT): Bruges til at navigere i og justere DSP-parametre.
- LED Indicators (SIGNAL, LIMIT, PROTECT): Provide visual feedback on signal presence, clipping, and protection status.
4.2 Bagpanel
Billede: Bagside view of the Behringer NX3000D Power Amplifier, displaying input and output connectors, cooling fan, and power inlet.
Billede: Vinklet bagside view of the Behringer NX3000D Power Amplifier, showing the USB port for PC connection and additional ventilation.
- AC-indgang: Connects to the main power supply using the provided power cable.
- Input Connectors (CH A/CH B): XLR/TRS combo jacks for connecting audio sources.
- Output Connectors (CH A/CH B): Twist-lock speaker connectors for connecting loudspeakers.
- USB-port: For connecting to a computer for DSP control and firmware updates.
- Køleventilator: Ensures proper thermal management of the amplivligere.
5. Opsætning
Follow these steps to set up your Behringer NX3000D amplivligere:
- Placering: Placer amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the unit for airflow. For rack mounting, secure the amplifier using appropriate rack screws.
- Strømtilslutning: Connect the supplied AC power cable to the AC input on the rear panel of the amplifier and then to a suitable power outlet. Ensure the ampSørg for, at strømafbryderen er i OFF-positionen, før du tilslutter den.
- Indgangsforbindelser: Connect your audio source (e.g., mixer, audio interface) to the Input Connectors (CH A and/or CH B) on the rear panel using XLR or 1/4" TRS cables.
- Udgangsforbindelser: Connect your passive loudspeakers to the Output Connectors (CH A and/or CH B) using high-quality speaker cables with twist-lock connectors. Ensure correct polarity (+ to + and - to -) and that the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or Bridge mode 4 Ohms).
- Første gang tændt: With all connections secure and input levels turned down, switch the amplifier's power button to the ON position. The display will illuminate, and the unit will perform a self-test.
6. Betjening af Amplivligere
The Behringer NX3000D features advanced DSP control for precise sound optimization.
6.1 Grundlæggende betjening
- Justering af niveauer: Slowly increase the Level Controls for CH A and/or CH B until the desired volume is achieved. Monitor the SIGNAL and LIMIT LEDs to prevent clipping. The SIGNAL LED indicates audio presence, while the LIMIT LED indicates that the signal is approaching clipping.
- Overvågningsstatus: The PROTECT LED will illuminate if the amplifier enters protection mode due to overheating, short circuits, or other issues. If this occurs, turn off the amplifier, resolve the issue, and then power it back on.
6.2 DSP-kontrol
The integrated DSP allows for comprehensive sound shaping and system management:
- Accessing DSP Settings: Brug OPSÆTNING button to enter the main DSP menu. Navigate through options using the OP/NED buttons and confirm selections with the rotary encoder.
- Crossover: Configure high-pass and low-pass filters for each channel. Choose from 3 filter types (e.g., Butterworth, Linkwitz-Riley) and slopes up to 48 dB/octave. This is crucial for integrating subwoofers or bi-amping systemer.
- Udligning (EQ): Utilize the 8 parametric EQs and 2 dynamic EQs per channel to fine-tune the frequency response. This helps in correcting room acoustics or tailoring the sound to specific preferences.
- Forsinke: Apply delay to individual channels to align speakers in different physical positions, ensuring phase coherence.
- Dynamics Processing: Adjust compression, limiting, and gating settings to control the dynamic range of your audio.
- SmartSense Loudspeaker Impedance Compensation: This feature automatically adjusts the amplifier's output to match the loudspeaker impedance, providing consistent power delivery and improved sound quality.
- Sikkerhedsindstillinger: Lock DSP settings to prevent unauthorized changes, ideal for fixed installations.
For detailed DSP parameter adjustments, refer to the full software manual available on the Behringer website or connect the amplifier to a PC via the USB port for software control.
7. Vedligeholdelse
Korrekt vedligeholdelse sikrer din bils levetid og optimale ydeevne amplivligere.
- Rensning: Rengør regelmæssigt ydersiden af ampmed en blød, tør klud. Brug ikke flydende rengøringsmidler eller opløsningsmidler. Sørg for, at ventilationsgitrene er fri for støv og snavs.
- Ventilation: Sørg altid for, at amplifier's ventilation openings are not obstructed. Overheating can lead to reduced performance and potential damage.
- Opbevaring: Hvis du opbevarer amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging or a protective case.
8. Fejlfinding
If you encounter issues with your Behringer NX3000D, consult the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power cable disconnected; Power outlet faulty; AmpSikringen er sprunget. | Check power cable connection; Test outlet with another device; Contact qualified service personnel for fuse replacement. |
| Ingen lydudgang | Input/output cables disconnected or faulty; Speaker impedance mismatch; Amplifier in protect mode; Input levels too low. | Check all cable connections; Verify speaker impedance; Check PROTECT LED and resolve underlying issue; Increase input levels gradually. |
| Forvrænget lyd | Input signal too high (clipping); Speaker impedance mismatch; Faulty cables or speakers. | Reduce input signal (monitor LIMIT LED); Verify speaker impedance; Test with different cables/speakers. |
| Amplifier overheats (PROTECT LED on) | Insufficient ventilation; Excessive load (low impedance speakers); Prolonged high-power operation. | Ensure proper ventilation; Use speakers with correct impedance; Reduce output level or allow cooling time. |
If the problem persists after attempting these solutions, please contact Behringer support or a qualified service technician.
9. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Behringer |
| Modelnummer | NX3000D |
| Output Wattage | 2 x 1500 Watts (2 Ohms); 2 x 900 Watts (4 Ohms); 3000 Watts (4 Ohms Bridge mode) |
| Højttaler Amplifikationstype | Klasse D |
| Varens vægt | 7.92 pund / 3.6 kilogram |
| Produktdimensioner | 19.02 x 9.09 x 3.7 tommer |
| Connector Type | Twist-lock (Outputs), XLR/TRS Combo (Inputs) |
| Strømkilde | Elektrisk med ledning |
| Voltage | 100V |
| Farve | Sort |
| DSP | High-performance DSP with 24-bit/96 kHz converters, delay, crossover, EQ, dynamics processing, SmartSense Impedance Compensation |
10. Garanti og support
10.1 Produktgaranti
The Behringer NX3000D ampLifier leveres typisk med en 3 års begrænset garanti, indicating its design and engineering quality. Please refer to the warranty card included with your product or visit the official Behringer webwebsted for detaljerede vilkår og betingelser.
Image: Behringer logo with a '3 Years Warranty' badge, indicating the product is designed and engineered in Germany.
10.2 Teknisk support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Behringer webwebstedet eller kontakt deres kundesupport. Du kan finde flere oplysninger og ressourcer på Behringer Store.
