Indledning
Thank you for choosing the Aurora 30 Inch Off Road LED Light Bar. This manual provides essential information for the proper installation, operation, and maintenance of your new light bar. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Front view of the Aurora 30-inch single row LED light bar, showcasing its sleek black housing and bright LED array.
Produktegenskaber
The Aurora 30 Inch Off Road LED Light Bar is engineered for extreme durability and superior performance, featuring advanced design and high-quality components:
- IP69K-klassificering: 100% sealed against dust and foreign contaminants, capable of withstanding high-pressure, high-temperature washdowns.
- Robust hus: Constructed from high-quality 6063 aluminum, sealed with 316 stainless steel screws every 1.5 inches for an impenetrable seal.
- Holdbar linse: Crafted from high-quality GE Lexan, 300 times stronger than glass, resistant to corrosive acids, chemicals (like gasoline), scratches, and UV radiation.
- Advanced Breather Apparatus: Uniquely designed to prevent condensation and water intrusion within the light bar.
- Deutsch Connector: Equipped with a globally renowned waterproof connector for ease of use and secure electrical connections.
- Wind Reducers: Integrated to prevent unwanted wind noise during high-speed travel.
- Dupont Painting: Outdoor Dupont painting coats the housing, ensuring color retention and protection for up to 5 years.
- Cree LED Chips: Utilizes USA-made Cree LED chips for low forward voltage, low heat generation, long life, and high ESD tolerance and resistance.
- PCBA Protection: The Printed Circuit Board Assembly (PCBA) features unique temperature, voltage, and current protection designs to maximize efficiency and increase durability, preventing electromagnetic interference with other vehicle electronics.
- Overvoltage Beskyttelse: Installed to prevent premature failure from accidental voltage udsving.
Informational graphic detailing the exterior features of the light bar, such as its IP69K rating, 6063 aluminum housing, GE Lexan lens, and Dupont painting.
Informational graphic explaining the interior components, including Cree LED chips and the advanced PCBA with temperature, voltage, and current protection.
Specifikationer
Detailed technical specifications for the Aurora 30 Inch Off Road LED Light Bar:
| Størrelse | 30 tommer |
| Bjælketype | Kombination |
| Dimensioner (L x B x H) | 31.9 x 3.2 x 1.8 tommer |
| Antal lysdioder | 30 |
| Number of LED Rows | 1 |
| Driftstemperatur | -40 til 145 grader Fahrenheit |
| Wattage | 150 watt |
| Operation Voltage | 10-30V DC |
| Amp Tegne | 7.3 Amps |
| Lumens | 12,840 lm |
| IP-vurdering | IP69 |
| Levetid | 50,000 timer |
| Husets farve | Sort |
| Overall Height (when mounted) | 2.5 tommer |
| Varens vægt | 1.06 pund (481.94 gram) |
| Materiale | 6063 Aluminum, 316 Stainless Steel, GE Lexan |
Image displaying key specifications of the Aurora 30-inch LED light bar, including size, beam type, dimensions, number of LEDs, wattage, lumens, and IP rating.
Installation
Proper installation is crucial for the performance and safety of your light bar. It is recommended to have this product installed by a qualified professional.
Komponenter inkluderet:
- Aurora 30 Inch Single Row LED Light Bar
- Monteringsbeslag i rustfrit stål
- Torx Head Bolts (for theft prevention)
- Deluxe Wiring Harness (with Deutsch connector)
Monteringsvejledning:
- Vælg monteringssted: Select a secure and stable location on your vehicle's exterior that provides adequate clearance and optimal light projection.
- Fastgør beslag: Secure the stainless steel mounting brackets to the light bar using the provided hardware. Ensure they are firmly tightened.
- Position Light Bar: Place the light bar with attached brackets onto your chosen mounting surface. Mark the drilling points for the bracket bolts.
- Bore huller: Carefully drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the mounting hardware.
- Secure Light Bar: Fasten the light bar to the vehicle using the Torx head bolts and security nuts. Tighten all bolts securely to prevent movement and theft.
Close-up of the stainless steel mounting bracket and the included Torx head bolt, designed for secure and theft-resistant installation.
Ledningsinstruktioner:
- Afbryd batteriet: Before beginning any electrical work, disconnect the vehicle's battery to prevent accidental short circuits.
- Tilslut ledningsnet: Connect the Deutsch connector from the light bar to the corresponding connector on the deluxe wiring harness. Ensure a secure, waterproof connection.
- Rute ledninger: Carefully route the wiring harness from the light bar to the vehicle's power source (e.g., battery, fuse box), ensuring it is protected from sharp edges, heat, and moving parts.
- Tilslut til strøm: Connect the positive (+) wire of the harness to a fused 12V/24V power source and the negative (-) wire to a suitable ground point on the vehicle chassis.
- Installer switch: Connect the switch provided with the wiring harness to a convenient location inside the vehicle.
- Gentilslut batteri: Når alle forbindelser er sikre og verificeret, skal du tilslutte køretøjets batteri igen.
Bag view of the Aurora 30-inch LED light bar, highlighting the ribbed heat sink design and the integrated Deutsch connector for secure wiring.
Operation
Operating your Aurora LED Light Bar is straightforward:
- Tænd/sluk: Use the installed switch to turn the light bar on or off.
- Strålemønster: The light bar features a combination beam pattern, providing both a wide flood for peripheral vision and a focused spot for long-distance illumination.
- Optimal brug: This light bar is designed for off-road use and auxiliary lighting. Always check local regulations regarding the use of auxiliary lighting on public roads.
Pleje og vedligeholdelse
To ensure the longevity and optimal performance of your Aurora LED Light Bar, follow these maintenance guidelines:
- Rensning: Regularly clean the lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the GE Lexan lens or Dupont coating.
- Inspektion: Periodically inspect the mounting hardware and wiring connections for any signs of loosening, corrosion, or damage. Tighten any loose bolts and repair or replace damaged wiring as needed.
- Beskyttelse af belægning: The Dupont painting is designed to protect the housing for up to 5 years. Avoid scratching or chipping the coating to maintain its protective properties.
- Udluftningsventil: Do not obstruct the breather apparatus, as it is essential for preventing condensation buildup inside the light bar.
Fejlfinding
If you encounter issues with your Aurora LED Light Bar, refer to the following common troubleshooting steps:
- Lysbjælken tænder ikke:
- Check all wiring connections for looseness or corrosion.
- Kontroller, at køretøjets batteri har tilstrækkelig opladning.
- Inspect the fuse in the wiring harness; replace if blown.
- Test om kontakten fungerer korrekt.
- Svagt eller flimrende lys:
- Sørg for korrekt voltage supply (10-30V DC). Low voltage kan forårsage dæmpning.
- Check for loose or corroded ground connections.
- Inspect wiring for any damage or short circuits.
- Kondens inde i linsen:
- Ensure the breather apparatus is not obstructed.
- Verify that the Deutsch connector is fully seated and sealed.
- If condensation persists, contact customer support.
Hvis disse trin ikke løser problemet, bedes du kontakte Aurora kundesupport for yderligere assistance.
Testing and Certifications
Aurora LED Light Bars undergo rigorous testing and adhere to strict certification standards to ensure quality and reliability:
- Salt & Fog Testing: A highly corrosive testing measure involving a high saline environment. This test ensures the product retains its coating from salt exposure on roads in winter seasons and withstands sea water.
- Lens Impact Test: A 17-ounce iron ball is dropped onto the glass from a height of 40 inches to mimic the impact of a rock or other foreign debris coming into contact with the LED light.
- Vibrationstest: Ensures the product is stable enough to remain on the vehicle during extreme driving conditions like trail riding, off-roading, and rock climbing.
- UV Test: The product is placed in a special UV emitting machine for two days, simulating an environment equal to 5 years of direct UV lighting exposure.
- Temperaturtest: The product undergoes both extreme high and low temperature conditions to ensure the housing will not discolor.
- CE certificeret: The lights are CE Certified, which is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety, and environmental protection legislation.
- RoHS-certificeret: RoHS Certified Supplier means the supplier does not engage in any illegal hazardous waste dumping.
Informational graphic outlining the rigorous testing and certifications, such as Salt & Fog, Lens Impact, Vibration, UV, Temperature, CE, and RoHS.
Garanti og support
Aurora stands behind the quality of its products. While specific warranty details may vary, general product warranties typically cover manufacturing defects under normal use. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Aurora webwebsted.
Beskyttelsesplaner:
Extended protection plans may be available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans can offer peace of mind against accidental damage or extended mechanical failures.
- 3-årig beskyttelsesplan: Kan købes én gang.
- Fuld beskyttelse: En månedlig plan, der dækker berettigede tidligere og fremtidige køb.
For inquiries regarding your product, technical support, or warranty claims, please contact Aurora customer service through their official channels.
