1. Sikkerhedsoplysninger
Please read all safety instructions carefully before installation and operation. Failure to do so may result in product damage, property damage, or personal injury.
- Ensure the motorcycle's power is disconnected before beginning installation to prevent electrical shock or short circuits.
- Do not expose the control module or LED components to extreme temperatures or direct water immersion.
- Verify all connections are secure and properly insulated to prevent moisture ingress and electrical issues.
- Mount components in locations that do not obstruct moving parts or interfere with safe operation of the motorcycle.
- Hold fjernbetjeningen væk fra børn.
2. Pakkens indhold
Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, please contact XKGLOW customer support.
Billedbeskrivelse: En overhead view displaying all components included in the XKGLOW 7 Color Remote Control Motorcycle LED Light Kit. Visible items include a main control module, LED light strips, power wiring harness with an inline switch, extension cables, various connectors, zip ties for cable management, and an XKGLOW brand sticker.
- XKGLOW Control Module (1)
- LED Light Strips (Quantity may vary based on kit, typically 4-8 strips)
- Power Wiring Harness with Inline Switch (1)
- Extension Cables (Various lengths, typically 36 inches)
- Connectors (Various types for secure connections)
- Zip Ties (For cable management)
- Adhesive Mounting Tape (Pre-applied or separate rolls)
- Trådløs fjernbetjening (1)
- XKGLOW Sticker (1)
3. Opsætning og installation
The XKGLOW LED Light Kit is designed for plug-n-play installation. Follow these steps for optimal performance and longevity.
- Planlæg dit layout: Before mounting, determine the desired locations for your LED strips/pods and the control module. Consider areas like under the tank, saddlebags, ground effects, behind the air cleaner, or on brake calipers. Ensure cables can reach without being stretched or pinched.
- Rengør monteringsflader: Thoroughly clean and dry all surfaces where LED strips/pods will be mounted. Use an alcohol wipe to remove any grease or dirt, ensuring proper adhesion of the mounting tape.
- Mount LED Strips/Pods: Peel the backing from the adhesive tape on the LED strips/pods and firmly press them onto the chosen surfaces. Hold for a few seconds to ensure good contact.
- Mount Control Module: Secure the control module in a dry, protected location, away from direct heat or moisture. Ensure it is accessible for wiring connections.
- Tilslut ledninger:
- Connect the LED strips/pods to the control module using the provided extension cables and connectors. Ensure all connections are snug.
- Connect the power wiring harness to the control module.
- Connect the red wire of the power harness to a switched 12V positive (+) power source on your motorcycle (e.g., accessory wire).
- Connect the black wire of the power harness to a reliable ground (-) point on the motorcycle chassis.
- Sikre kabler: Use the provided zip ties to neatly route and secure all cables, preventing them from dangling, rubbing against hot engine parts, or interfering with moving components.
- Test funktionalitet: Reconnect the motorcycle's power. Turn on the ignition and use the wireless remote control to test all light functions (on/off, color change, dimming, effects).
4. Betjeningsvejledning
Your XKGLOW LED Light Kit is controlled by a compact 4-key wireless remote. Familiarize yourself with its functions:
- Tænd/sluk-knap (tænd/sluk): Press once to turn the lights on, press again to turn them off.
- Farveændringsknap: Cycles through 7 solid colors and transitions through 2 million color variants. Press to select your desired color or effect.
- Dæmp knap: Adjusts the brightness level of the lights. Press repeatedly to cycle through different dimming levels.
- Effect Button (Strobe/Breath): Activates special lighting effects such as strobe (flashing) or breath (slow fade in/out). Press to cycle through available effects.
Ensure the remote has a clear line of sight or is within range of the control module for optimal response.
5. Vedligeholdelse
Regular maintenance ensures the longevity and performance of your LED light kit.
- Rensning: Gently wipe LED strips and the control module with a soft, damp klud. Undgå slibende rengøringsmidler eller stærke kemikalier.
- Inspektion: Periodically check all wiring connections for looseness or corrosion. Ensure zip ties are secure and cables are not rubbing against sharp edges or hot components.
- Kontrol af vedhæftning: Verify that all LED strips/pods remain firmly adhered to their mounting surfaces. Re-secure with additional adhesive if necessary.
6. Fejlfinding
If you encounter issues with your XKGLOW LED Light Kit, refer to the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | No power to the control module; loose wiring; dead remote battery. | Check power and ground connections. Ensure the inline switch is on. Replace remote battery. Verify motorcycle ignition is on if connected to a switched power source. |
| Fjernbetjeningen reagerer ikke. | Remote battery is low or dead; remote out of range; interference. | Replace the remote battery. Move closer to the control module. Ensure no large metal objects are blocking the signal. |
| Some LEDs are not lighting up. | Loose connection to a specific LED strip/pod; damaged LED strip/pod. | Check the connection for the affected LED strip/pod. If still not working, the strip/pod may need replacement. |
| Lights flicker or change colors erratically. | Unstable power supply; loose connection; moisture in connections. | Ensure stable 12V power. Check all wiring connections for tightness and corrosion. Inspect for moisture and dry out if necessary. |
7. Specifikationer
- Model: 34016
- Pære type: LED
- Voltage: 30 Volts (Operating voltage typically 12V DC for motorcycles)
- Varens vægt: Approximately 13.4 ounces (for the kit)
- Produktdimensioner: Control module approximately 5 x 5 x 5 inches
- Farvemuligheder: 7 solid colors, 2 million color variants
- Kontrollere: 4-key wireless remote (On/Off, Color Change, Dim, Effect)
- Installation: Plug-n-play wiring
8. Garantioplysninger
XKGLOW products are manufactured to high-quality standards. This product typically comes with a limited warranty covering defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information, including coverage period and how to make a claim, please refer to the official XKGLOW webwebstedet eller kontakt deres kundesupport direkte.
9. Kundesupport
If you have any questions, require technical assistance, or need to report a problem with your XKGLOW LED Light Kit, please contact our customer support team.
XKGLOW Customer Service:
Visit the official XKGLOW website for contact information, FAQs, and additional resources. You may find support through email, phone, or an online contact form.
Når du kontakter support, bedes du have dit produktmodelnummer (34016) og købsbevis klar.
