TC Electronic Ditto JAM X2 Looper Pedal Brugermanual

Indledning

Welcome to the user manual for the TC Electronic Ditto JAM X2 Looper Pedal. This intuitive looper pedal is designed for musicians seeking intelligent loop synchronization that responds to their band's rhythm. It features innovative BeatSense technology, allowing for automatic adjustment of loop tracks to your beat, and offers both Record-then-Play and Record-then-Overdub functionalities with unlimited overdubs and undo/redo capabilities. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Ditto JAM X2 Looper.

TC Electronic Ditto JAM X2 Looper Pedal, front view

Billede: Forside view of the TC Electronic Ditto JAM X2 Looper Pedal, showcasing the 'LOOP LEVEL' knob, 'REC-DUB-PLAY' and 'REC-PLAY-DUB' switches, 'LOOP' and 'STOP' footswitches, and 'BEAT SENSE' indicator.

Nøglefunktioner

Intuitive looper pedal with intelligent loop synchronization that responds to your band.
Innovative responsive BeatSense technology automatically adjusts loop tracks to your beat.
Choose between Record-then-Play or Record-then-Overdub functionalities.
Unlimited overdubs and undo/redo for total creative freedom.
Dual built-in mics accurately track band tempo by focusing only on rhythmic elements.

Close-up of the BeatSense indicator on the Ditto JAM X2

Billede: Et nærbillede view of the "BEAT SENSE" indicator on the pedal, highlighting its function.

External microphone for BeatSense technology

Image: An external microphone, likely used for the BeatSense technology, clipped onto a drum kit component.

Opsætning

Strømforsyning

The Ditto JAM X2 Looper requires a 9V power supply. Ensure you use a compatible power adapter (not included) to power the unit.

Forbindelser

Tilslut dit instrument (f.eks. guitar) til INPUT stik ved hjælp af et standard 6,5 mm instrumentkabel.
Tilslut PRODUKTION stik til din amplifier or next pedal in the signal chain using a standard 1/4-inch instrument cable.
An EXT MIC input is available for connecting an external microphone to enhance BeatSense accuracy, particularly in complex rhythmic environments.

Bag view of TC Electronic Ditto JAM X2 Looper Pedal showing input/output jacks

Billede: Bagside view of the Ditto JAM X2 pedal, clearly showing the INPUT, OUTPUT, EXT MIC jacks, and the power input.

Betjeningsvejledning

Basic Looping

Indspilning: Tryk på LOOP footswitch once to start recording your loop. The LED will illuminate red.
Playback/Overdub: Tryk på LOOP footswitch again to stop recording and begin playback. If you press it again during playback, you will start overdubbing.
Stop: Tryk på STOP footswitch once to stop playback.
Fortryd/Gentag: Tryk og hold på STOP footswitch to undo the last overdub. Press and hold again to redo it.
Klar sløjfe: Tryk og hold på LOOP footswitch to clear the current loop.

Loop Level Control

De LOOP NIVEAU knob adjusts the overall volume of your recorded loop. Turn clockwise to increase volume, counter-clockwise to decrease.

Record Modes (REC-DUB-PLAY / REC-PLAY-DUB)

The Ditto JAM X2 offers two recording modes, selectable via the small toggle switch:

REC-DUB-PLAY: In this mode, the first press of the LOOP footswitch records, the second press starts overdubbing, and a third press initiates playback without further overdubbing.
REC-PLAY-DUB: In this mode, the first press records, the second press starts playback, and a third press initiates overdubbing.

Close-up of the REC-DUB-PLAY and REC-PLAY-DUB toggle switch

Billede: En detaljeret view of the toggle switch for selecting between REC-DUB-PLAY and REC-PLAY-DUB modes.

BeatSense Technology

The innovative BeatSense technology uses dual built-in microphones to listen to your band's rhythmic elements (like drums) and automatically synchronize your loops to the detected tempo. This ensures your loops stay perfectly in time with the rest of the band.

Musician's feet on the Ditto JAM X2 pedal during performance

Image: A musician's feet operating the Ditto JAM X2 pedal on a stage floor, demonstrating its use in a live setting.

Opretholdelse

Hold pedalen ren og fri for støv og snavs. Brug en blød, tør klud til rengøring.
Undgå at udsætte pedalen for ekstreme temperaturer, fugtighed eller direkte sollys.
Do not attempt to open the unit or perform repairs yourself, as this will void the warranty. Refer to qualified service personnel for any issues.
Ensure proper ventilation around the pedal during use.

Bottom label of TC Electronic Ditto JAM X2 Looper Pedal with product information

Image: The bottom label of the Ditto JAM X2 pedal, displaying compliance information, manufacturer details, and power requirements.

Fejlfinding

Ingen lydudgang

Kontrollér alle kabelforbindelser (indgang, udgang, strøm).
Ensure the pedal is receiving power.
Verify the LOOP LEVEL knob is not set to minimum.
Test with different cables and amplifter/instrument til at isolere problemet.

Loop Not Synchronizing

Ensure the BeatSense microphones are not obstructed.
Verify the external microphone (if used) is properly connected and functioning.
The BeatSense technology works best with clear, consistent rhythmic input (e.g., drums). Complex or irregular rhythms may affect synchronization accuracy.
Ensure the pedal is placed in an optimal position to pick up rhythmic sounds from the band.

Footswitches Not Responding

Tjek strømforsyningen.
Kontakt kundesupport, hvis problemet fortsætter.

Specifikationer

Feature	Specifikation
Model	DITTO JAM X2 LOOPER
Mærke	TC Electronic
Varens vægt	1.26 pund (570 gram)
Produktdimensioner	4.45 x 5.31 x 2.13 tommer (5.31" L x 4.45" B x 2.13" H)
Farve	Sort
Strømkilde	Batteridrevet (9 volt)
Hardware-interface	1/4-tommer lyd
Signalformat	Analog

Garanti og support

For warranty information and technical support, please refer to the official TC Electronic webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.

Online ressourcer: Besøg TC Electronic Store on Amazon for yderligere produktinformation og ressourcer.

	TC Electronic Ditto X2 Looper User Manual - Features, Setup, and Operation Detailed user manual for the TC Electronic Ditto X2 Looper pedal. Covers safety, setup, controls, creating and managing loops, effects, firmware updates, and technical specifications.
	Brugervejledning til TC Electronic Ditto Looper Omfattende brugermanual til TC Electronic Ditto Looper, der dækker opsætning, betjening, funktioner, tekniske specifikationer og fejlfinding. Lær, hvordan du optager, overdubber, fortryder, redover og administrerer dine loops.
	TC Electronic Ditto Jam X2 Looper brugermanual - Funktioner, opsætning og betjening Omfattende brugermanual til TC Electronic Ditto Jam X2 Looper-pedalen. Lær om dens BeatSense-teknologi, tilstande, opsætning, tilslutninger, vedligeholdelse og specifikationer.
	Brugervejledning til TC Electronic Ditto Looper Omfattende brugermanual til TC Electronic Ditto Looper, med detaljerede oplysninger om dens funktioner, betjening, opsætning og tekniske specifikationer for guitar- og bassister. Lær, hvordan du optager, overdubber, fortryder, redor og administrerer dine loops.
	TC Electronic DITTO JAM X2 LOOPER Quick Start Guide Get started quickly with the TC Electronic DITTO JAM X2 LOOPER. This guide provides essential safety information, setup notes, and compliance details for musicians.
	TC Electronic DITTO JAM X2 LOOPER Quick Start Guide Quick start guide for the TC Electronic DITTO JAM X2 LOOPER, a versatile looper pedal for musicians. Learn about loop clearing, BeatSense LED functions, microphone placement, and regulatory compliance.