Indledning
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Gami Bed, Model 1G75111. Please read these instructions carefully before beginning assembly or use to ensure safe and proper functioning of the product.
The Gami Bed is a quality product manufactured in France, designed for easy maintenance and featuring a timeless design. It is suitable for two standard occupants.
Produkt overview
The Gami Bed is constructed from engineered wood with a Light Kronberg Oak finish. It is designed as a panel bed, providing a stable base for your mattress.
Opsætning og montering
Assembly of the Gami Bed is required. The product is shipped in multiple boxes (two or more), which may arrive on different days. Please ensure all packages have been received before beginning assembly.
Før du begynder:
- Unpack all components and verify against the parts list (usually included in the packaging).
- Ensure you have the necessary tools (e.g., screwdriver, hammer, Allen wrench - typically included or specified).
- Assemble the bed in the room where it will be used, or in a space large enough to accommodate its dimensions (197 cm L x 128 cm W x 80 cm H).
- It is recommended to have at least two people for assembly due to the size and weight of the components.
Monteringstrin:
Detailed assembly instructions with diagrams are provided within the product packaging. Follow these instructions carefully.
- Identify and separate all components for the headboard, footboard, side rails, and bed slats.
- Fastgør sideskinnerne til hovedgærdet og fodgærdet med de medfølgende beslag. Sørg for, at alle forbindelser er sikre.
- Install the bed slats or panel base onto the side rails. Ensure they are evenly spaced and securely fastened.
- Once assembled, gently move the bed into its final position.
- Place your mattress onto the assembled bed frame.
For any difficulties during assembly, refer to the manufacturer's contact information provided in the packaging.
Betjeningsvejledning
The Gami Bed is designed for static use as a sleeping surface. No specific "operating" steps are required beyond proper assembly and placement of a suitable mattress.
Retningslinjer for brug:
- Ensure the bed is placed on a flat, stable surface to prevent wobbling or instability.
- The bed is designed to accommodate two standard occupants. Do not exceed this capacity.
- Avoid jumping on the bed, as this can damage the frame or slats.
- Regularly check all screws and fasteners to ensure they remain tight. Tighten if necessary.
Opretholdelse
The Gami Bed is designed for easy maintenance to ensure its longevity and appearance.
Rensning:
- Til generel rengøring skal overfladerne tørres af med en blød,amp klæde.
- Undgå at bruge slibende rengøringsmidler, stærke kemikalier eller opløsningsmidler, da disse kan beskadige overfladen.
- Tør straks eventuelle spild op for at forhindre pletter eller vandskader.
Generel pleje:
- Keep the bed away from direct sunlight and heat sources to prevent warping or fading of the wood finish.
- Periodically check and tighten all assembly hardware to maintain structural integrity.
- If moving the bed, lift it rather than dragging it to prevent damage to the frame or floor.
Fejlfinding
This section addresses common issues you might encounter with your Gami Bed.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sengen føles vaklende eller ustabil. | Løst monteringsudstyr. Ujævn gulvoverflade. | Spænd alle skruer og bolte. Sørg for, at sengen står på en plan overflade; brug om nødvendigt afstandsskiver. |
| Knirkende lyde. | Løse forbindelser mellem rammekomponenter eller lameller. | Tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to contact points if squeaking persists. |
| Damage to wood finish. | Impact, scratches, or exposure to harsh chemicals. | For minor scratches, use a wood repair kit or touch-up pen matching the Light Kronberg Oak finish. For significant damage, contact the manufacturer. |
| Manglende dele under montering. | Emballagefejl eller mistet komponent. | Check all packaging thoroughly. Contact the manufacturer with your model number (1G75111) and a description of the missing part. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 1G75111 |
| Mærke | GAMI |
| Dimensioner (L x B x H) | 197 cm x 128 cm x 80 cm (77.6 tommer x 50.4 tommer x 31.5 tommer) |
| Varens vægt | 28.2 kilo (62.17 lbs) |
| Farve | Light Kronberg Oak |
| Råmateriale | Konstrueret træ |
| Trætype | Træ |
| Kapacitet | 2 people (standard) |
| Montering påkrævet | Ja |
| Pakkeindhold | 1 x Bed frame components |
| Number of Cartons | 2 |
| Fabrikant | Gautier Frankrig |
| ASIN | B07G2Q5WYY |
| International artikelkode | 03483600849311 |
Garanti og support
Information regarding spare parts availability is not directly provided in the product details. For warranty claims, missing parts, or technical support, please contact the manufacturer, Gautier France, or your point of purchase.
Når du kontakter support, bedes du have dit modelnummer (1G75111) og ASIN (B07G2Q5WYY) ready for faster assistance.
