Fulham Lighting FHSAC1UNV40C FireHorse Hot Spot Plus Alt-i-en LED-driver og nødsystem brugermanual

1. Introduktion

This manual provides essential instructions for the safe installation, operation, and maintenance of the Fulham Lighting FHSAC1UNV40C FireHorse Hot Spot Plus All-in-One LED Driver & Emergency System. This unit integrates an LED driver with an emergency lighting system, offering 0-10V dimming and programmable output for various LED applications. Please read this manual thoroughly before installation and retain it for future reference.

2. Sikkerhedsoplysninger

ADVARSEL: Risk of electric shock. Installation and servicing must be performed by qualified personnel only. Disconnect power before servicing.

• Ensure all wiring complies with national and local electrical codes.
• Do not install in locations where the ambient temperature exceeds the specified operating range.
• This device is designed for dry and damp kun steder.
• Proper grounding is required to prevent electric shock.
• Do not attempt to open or modify the unit. There are no user-serviceable parts inside, except for the replaceable battery.

3. Produktet er slutview

The FHSAC1UNV40C is a compact, all-in-one solution for LED lighting, combining a high-performance LED driver with an integrated emergency backup system. It features a replaceable battery and supports 0-10V dimming. The output current is programmable, allowing for flexible application with various LED modules.

Billede 3.1: The Fulham FHSAC1UNV40C FireHorse Hot Spot Plus unit, showing the integrated LED driver and emergency battery components.

4. Specifikationer

Billede 4.1: Key features of the FireHorse Hot Spot Plus system, including compatibility, installation flexibility, and emergency illumination duration.

5. Opsætning og installation

VIGTIG: All installation procedures must be performed by a qualified electrician in accordance with the National Electrical Code and local regulations.

5.1 Kontrol før installation

• Kontroller, at input voltage (120-277VAC) matches the building's electrical supply.
• Ensure the LED module's voltage and current requirements are compatible with the FHSAC1UNV40C's output range.
• Confirm the installation environment is suitable (dry/damp location, within specified ambient temperature).

5.2 Ledningsinstruktioner

Refer to the wiring diagram provided on the unit label for specific connections. General wiring steps include:

1. Indgangseffekt: Connect the AC input wires (Black, White, Green/Ground) to the building's electrical supply.
2. LED udgang: Connect the LED output wires (typically Red/Positive, Blue/Negative) to the LED module.
3. Dæmpningskontrol: Connect the 0-10V dimming wires (Purple/Dim+, Gray/Dim-) to a compatible 0-10V dimmer or control system.
4. Test switch: Connect the illuminated test switch wires as indicated. This switch is used for manual testing of the emergency function.
5. Batteriforbindelse: Ensure the internal battery is properly connected. The unit will begin charging the battery upon initial power-up.

5.3 Programmable Output Current

The output current can be programmed to match the specific requirements of the LED module. Consult the product datasheet or contact Fulham Lighting support for detailed instructions on programming the output current. This typically involves a specific programming device or procedure.

6. Betjeningsvejledning

6.1 Normal drift

When AC power is supplied, the FHSAC1UNV40C operates as a standard LED driver, providing power to the connected LED module. The 0-10V dimming input allows for adjustment of the LED brightness.

6.2 Nøddrift

In the event of an AC power failure, the unit automatically switches to emergency mode, powering the LED module from its internal battery. The emergency power level (5W or 10W) is user-selectable during installation.

Billede 6.1: Illustration of emergency lighting functionality, where lights illuminate during a power failure.

6.3 Test Switch and Self-Diagnostics

The illuminated test switch provides visual indication of the unit's status and allows for manual testing of the emergency function. The unit also features switchable self-diagnostics, which automatically perform periodic tests of the battery and emergency circuitry. Refer to the unit's label for specific diagnostic indicator patterns.

7. Vedligeholdelse

7.1 Batteriopladning

The internal LiFePO4 battery requires a minimum of 12 hours to fully charge after installation or a prolonged power outage. Ensure continuous AC power is supplied to allow for proper battery charging.

7.2 Månedlig testning

Perform a monthly 30-second functional test by pressing and holding the test switch. The LED module should illuminate in emergency mode. Release the switch, and the unit should return to normal operation.

7.3 Annual Testing

Conduct an annual 90-minute (or 180-minute, depending on selected output) full discharge test. Interrupt AC power to the unit for the specified duration. The LED module should remain illuminated for the entire test period. If the LED module does not remain illuminated for the full duration, the battery may need replacement.

7.4 Udskiftning af batteri

The battery is replaceable. When replacement is necessary, use only the specified Fulham replacement battery (Model FHSBATL2-3.2L). Disconnect AC power before replacing the battery. Dispose of old batteries according to local regulations.

8. Fejlfinding

If troubleshooting steps do not resolve the issue, contact Fulham Lighting technical support.

9. Garanti og support

For specific warranty information and technical support, please refer to the official Fulham Lighting webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.

Fulham Lighting Contact Information:
Besøg www.fulham.com for support and product information.