Bennett Marine Bolt Electric Trim Tab System 12" x 12" Instruction Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bennett Marine Bolt Electric Trim Tab System. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This system is designed to enhance boat performance by allowing precise control over the vessel's running attitude.

Produktkomponenter

The Bennett Marine Bolt Electric Trim Tab System BOLT1212 includes the following components:

• Two (2) Bolt Electric Actuators with 6-foot wire harnesses and waterproof connectors (Mfg. PN# BEA3000).
• Two (2) Stainless Steel Trim Tabs and mounting plates, 12" x 12".
• One (1) Electric Integrated Helm Control (Mfg. PN# OBI9000E).
• Two (2) 20-foot Actuator Wire Harnesses with waterproof connectors (Mfg# BAW2020).
• Mounting Hardware (screws, nuts, washers, brackets).

Figur 1: Overview of the Bennett Marine Bolt Electric Trim Tab System components, including actuators, trim tabs, helm control, and wiring.

Figur 2: Detaljeret view of the system components, highlighting the 20-ft wire harnesses, integrated helm control, actuators, and 12"x12" trim tabs.

Opsætning og installation

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified marine technician. Refer to the detailed diagrams and instructions provided in the packaging for specific mounting locations and wiring schematics.

1. Mounting the Trim Tabs and Actuators

• Trim Tab Placement: Position the 12"x12" stainless steel trim tabs on the transom, ensuring they are parallel to the waterline and clear of any obstructions.
• Actuator Mounting: The Bolt Electric Actuators feature an adjustable upper hinge. Mount the actuators to the trim tabs and transom according to the provided templates. Ensure the actuators are securely fastened to withstand marine conditions.

Figure 3: Close-up of the BEA3000 electric actuator, highlighting its 13-3/4 inch length (2.5 inch stroke) and adjustable upper hinge for flexible installation.

Figure 4: Chart illustrating recommended trim tab sizes (Span x Chord) for various boat lengths, for both electric and standard hydraulic sets. This system uses 12"x12" electric tabs.

Figure 5: Detailed dimensions of the 12"x12" trim tab, showing span, chord, and actuator mounting points.

2. Elektriske ledninger

• Connect Actuators: Connect the 6-foot wire harnesses from the actuators to the 20-foot extension harnesses. Ensure waterproof connectors are properly sealed.
• Hjelmkontrolledninger: Wire the Integrated Helm Control (OBI9000E) to the vessel's 12V DC power supply and the actuator harnesses. Follow the wiring diagram carefully to ensure correct polarity and function.
• Strømtilslutning: Connect the system to a fused 12V DC power source. The system has a current draw of 10 Amps (at 250 lb) and 30 Amps (at 750 lb).

Figure 6: Components of the system, including the BEA3000 actuators, BAW2020 wire harnesses, OBI9000E helm control, and various mounting hardware.

Betjeningsvejledning

The Integrated Helm Control provides intuitive operation for adjusting your vessel's trim. The trim tab position LEDs indicate the current tab position.

• "DN" Buttons: Press the "DN" (Down) buttons to lower the trim tabs. Lowering the tabs will push the bow of the boat down.
• "BOW UP" Buttons: Press the "BOW UP" buttons to raise the trim tabs. Raising the tabs will lift the bow of the boat.
• "ALL UP"-knap: Simultaneously raises both trim tabs to their fully retracted position.
• "ALL DN"-knap: Simultaneously lowers both trim tabs to their fully extended position.
• Automatisk tilbagetrækning af faneblad: Tabs automatically retract when the ignition is powered off, protecting them during trailering or docking.

Figure 7: The Integrated Helm Control unit, showing the "DN", "BOW UP", "ALL UP", and "ALL DN" buttons, along with LED indicators for trim tab position.

Figur 8: Diverse views of the trim tabs and helm control in action, demonstrating how the system adjusts the boat's running attitude.

Opretholdelse

The Bolt Electric Actuators are designed to be maintenance-free and completely waterproof. However, regular inspection of the entire system is recommended to ensure continued optimal performance.

• Visuel inspektion: Periodically check the trim tabs, actuators, and wiring for any signs of damage, corrosion, or loose connections.
• Rensning: Clean the trim tabs and actuators with fresh water after each use, especially in saltwater environments, to prevent salt buildup and corrosion.
• Hardwarekontrol: Sørg for, at alt monteringsudstyr forbliver stramt.

Fejlfinding

If you experience issues with your trim tab system, refer to the following common troubleshooting steps:

For further assistance, contact Bennett Marine customer support.

Specifikationer

• Model: BOLT1212 (FO4321)
• Trimflap-dimensioner: 12 x 12 cm
• Voltage: 12 volt DC
• Aktuatortype: Electric (BEA3000)
• Actuator Chord Length: 6 ft (plus 20 ft extension harnesses)
• Aktiveringskraft: 750 lb
• Return Force: 750 lb
• Aktuel lodtrækning: 10 Amps (at 250 lb), 30 Amps (at 750 lb)
• Driftstilstand: Op-Ned
• Kontrollere: Integrated Helm Control (OBI9000E)

Garanti og support

The Bennett Marine Bolt Electric Trim Tab System comes with a Begrænset livstidsgaranti for the electric actuators, provided by the manufacturer. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in your product packaging or visit the official Bennett Marine webwebsted.

Du kan også besøge Bennett Marine Store on Amazon for yderligere produktinformation og supportressourcer.