Radial Catapult MINI TX Cat 5 Audio Snake brugermanual

Indledning

The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.

Radial Catapult MINI TX unit, angled view, showing the blue casing and product name.

Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.

Nøglefunktioner

4-Channel Audio Transmission: Supports four balanced analog audio signals.
Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
Passiv drift: Requires no external power, simplifying setup and increasing-pålidelighed.
Kompakt og holdbart design: Housed in a rugged steel enclosure, suitable for professional use.
XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.

Opsætningsinstruktioner

Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.

Identificer komponenter: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.

Radial Catapult MINI TX with four XLR cables connected, showing the input side.

Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.

Tilslut Ethernet-kabel: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.

Ende view of Radial Catapult MINI TX showing the RJ45 and XLR connectors.

Figure 3: End view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.

Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
Bekræft forbindelser: Double-check all cable connections to ensure they are secure and correctly routed.

Betjeningsvejledning

Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.

Signalflow: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
Kanalkortlægning: Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
Kabellængde: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.

Opretholdelse

The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.

Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Undgå slibende rengøringsmidler eller opløsningsmidler.
Opbevaring: Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
Kabelinspektion: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
Vedligeholdelse af stik: Keep the XLR and RJ45 connectors free of dust and debris.

Fejlfinding

If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:

Problem	Mulig årsag	Løsning
Intet lydsignal	Forkert kabelforbindelse Damaged Cat 5/6 cable Unshielded Cat 5/6 cable Defekt XLR-kabel Source/destination device issues	Ensure all XLR and RJ45 cables are securely connected. Verify you are using a shielded Cat 5 or Cat 6 cable. Test cables individually with other equipment. Check power and settings of connected audio devices.
Hum or noise in audio	Unshielded Cat 5/6 cable Ground loop issues Ekstern elektromagnetisk interferens	Ensure you are using a shielded Cat 5 or Cat 6 cable. Try isolating power supplies of connected equipment. Route Cat cable away from power lines or strong electromagnetic fields.
Intermitterende signal	Løse kabelforbindelser Beskadiget kabel eller stik	Reseat all cables firmly. Inspect cables and connectors for physical damage. Replace if necessary.

Specifikationer

Feature	Detalje
Model	800 8028 kr
Kanaler	4 (balanced analog audio)
Connector Type (Audio)	XLR Female (Input)
Connector Type (Data)	RJ45
Kabelkrav	Shielded Cat 5 or Cat 6 Ethernet cable
Operation	Passive (no power required)
Dimensioner (L x B x H)	6.3 x 4.3 x 3 tommer (ca.)
Vægt	1.06 pund (omtrentligt)
Byggemateriale	Stål
Farve	Blå

Garanti og support

Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.

Officiel Webwebsted: www.radialeng.com

	Radial HotShot MD StagBrugervejledning til e-mikrofonskifter Brugervejledning til Radial HotShot MD, somtage mikrofonskifter designet til øjeblikkelig omdirigering af dynamiske mikrofoner til flere destinationer, med nem kontrol for vokalister og bandkommunikation.
	Radial J48 Active Direct Box brugervejledning Omfattende brugervejledning til Radial J48 Active Direct Box, der beskriver dens funktioner, specifikationer og garantioplysninger til professionelle lydapplikationer.
	Brugervejledning til radial JDI passiv direkte boks Comprehensive user guide for the Radial JDI passive direct box, detailing its features, specifications, applications, and troubleshooting. Learn about its Jensen transformer, input/output impedance, and how to achieve optimal audio performance.
	Radial Headbone VT Brugervejledning: Guitar Amp Hovedskift Omfattende brugervejledning til Radial Headbone VT, en enhed der giver guitarister mulighed for at skifte mellem to rørinstrumenter amphøjttalerhoveder og et enkelt højttalerkabinet med fodpedalkontrol. Dækker opsætning, funktioner, sikkerhed og fejlfinding.
	Brugervejledning til Radial Workhorse Powerhouse 500-seriens rack Brugervejledning til Radial Workhorse Powerhouse, et rack-stel med 10 slots i 500-serien. Detaljer om funktioner, installation, signalflow, strømforsyning, specifikationer og garantioplysninger for professionelle lydteknikere.
	Brugervejledning til Radial LX8 ottekanals transformer isoleret linjesplitter Omfattende brugervejledning til Radial LX8, en otte-kanals transformerisoleret linjesplitter designet til professionelle lydapplikationer. Lær om dens funktioner, signalflow, tilslutninger og fejlfinding for at opnå professionel lydkvalitet og eliminere jordsløjfestøj.

Radial Engineering R800 8028