Radiolink R8EF 8-kanals 2.4 GHz RC-modtager brugsanvisning

1. Introduktion

The Radiolink R8EF is an 8-channel 2.4GHz RC receiver designed for various remote-controlled models, including airplanes, trucks, robots, and helicopters. It supports SBUS, PPM, and PWM signal outputs, offering versatility and compatibility with a range of Radiolink transmitters. This manual provides essential information for the proper setup, operation, and maintenance of your R8EF receiver.

Billede 1.1: Overview of the Radiolink R8EF receiver.

Image 1.2: Summary of key features and compatibility for the Radiolink R8EF receiver.

2. Nøglefunktioner

• Excellent Anti-interference: Utilizes a pseudo-random FHSS algorithm for robust anti-interference capabilities.
• Langt kontrolområde: Achieves a control range of up to 1.2 miles (2000 meters).
• 8 Channels and 3 Signals Support: Provides standard SBUS, PPM, and PWM signal outputs, suitable for most aircraft.
• Høj opløsning: Features a high-resolution ratio of 4096 for precise control.
• Hurtigt svar: Ensures fast response across all channels.
• Press to Bind: Simplifies the binding process with a single button press, eliminating the need for a traditional bind plug or complex radio setup.
• Anti-polarity Protection: Incorporates reverse polarity protection to prevent damage from incorrect power connections.
• Wide Input Voltage Område: Supports 3.0-15V DC input voltage, compatible with high-voltage servoer.
• Bred kompatibilitet: Works with Radiolink transmitters including T12D, T16D, T8S, T8FB, RC4GS, RC4GS V2, RC4GS V3, RC6GS, RC6GS V2, RC6GS V3, and RC8X.

3. Opsætning

3.1 Bindingsproces

The R8EF receiver features a simplified binding process:

1. Power on your Radiolink transmitter.
2. Power on the R8EF receiver.
3. Locate the bind button on the side of the R8EF receiver.
4. Press and hold the bind button for approximately 1 second. The LED indicator on the receiver will flash rapidly, indicating it is in binding mode.
5. Once the LED on the receiver turns solid blue, the binding process is complete.

Note: If using a multi-protocol radio like the TX16S, you may need to tap the bind button twice within one second to switch the R8EF into PWM mode for proper operation, indicated by a solid red LED. The default mode might be purple (combined red and blue).

Image 3.1: Location of the bind button on the R8EF receiver.

3.2 Forbindelsesdiagrammer

The R8EF receiver supports PWM, PPM, and SBUS signal outputs. Ensure correct wiring based on your model's requirements.

3.2.1 PWM Output Connection

Image 3.2: PWM output connection diagram for the R8EF receiver. Channels 1-8 provide individual PWM signals for Aileron, Elevator, Throttle, Rudder, and Auxiliary functions. Each channel port includes Signal, VCC(+), and GND(-) pins.

3.2.2 SBUS/PPM Output Connection

Image 3.3: SBUS/PPM output connection diagram for the R8EF receiver. SBUS is typically on Channel 1, and PPM on Channel 2. Channels 3-8 provide individual PWM signals. Each channel port includes Signal, VCC(+), and GND(-) pins.

4. Betjeningsvejledning

After successful binding and correct wiring, the R8EF receiver will establish a stable connection with your compatible Radiolink transmitter. The receiver's primary function is to translate control signals from the transmitter into commands for your model's servos and other components.

• Ensure your transmitter is powered on before powering on the receiver to prevent unintended control inputs.
• Verify all control surfaces and functions respond correctly to transmitter inputs before operating your model.
• The blue LED on the receiver indicates a successful connection. If the LED is flashing or off, re-check power and binding.

4.1 Kompatible sendere

The R8EF receiver is compatible with the following Radiolink transmitters:

• Radiolink T12D
• Radiolink T16D
• Radiolink T8S
• Radiolink T8FB
• Radiolink RC4GS, RC4GS V2, RC4GS V3
• Radiolink RC6GS, RC6GS V2, RC6GS V3
• Radiolink RC8X

Image 4.1: The R8EF receiver is compatible with various Radiolink transmitters, including the T8S and T8FB models shown.

5. Vedligeholdelse

Proper maintenance ensures the longevity and reliable performance of your R8EF receiver:

• Hold rent: Regularly clean the receiver and its connections to prevent dust and debris buildup. Use a soft, dry cloth.
• Beskyt mod fugt: Avoid exposing the receiver to water or high humidity. If used in damp conditions, ensure it is properly protected.
• Sikker montering: Mount the receiver securely within your model to prevent vibrations from loosening connections or damaging components.
• Antenneplacering: Ensure the antenna is positioned correctly and not obstructed by carbon fiber or metal parts, which can reduce range. Avoid sharp bends in the antenna wire.
• Strømforsyning: Always use a stable power source within the specified voltage-område (3.0-15V DC).
• Undersøg forbindelser: Periodically check all wiring and connectors for signs of wear, corrosion, or loose connections.

6. Fejlfinding

If you encounter issues with your R8EF receiver, refer to the following common problems and solutions:

7. Specifikationer

Image 7.1: Physical dimensions of the Radiolink R8EF receiver.

Image 7.2: Comparison table of Radiolink receivers, highlighting R8EF specifications against other models.

8. Support og garanti

For technical support or warranty inquiries, please contact Radiolink customer service. You can find support information on the official Radiolink website or through your point of purchase. Radiolink provides comprehensive user manuals and FAQ troubleshooting files on their product pages.

Radiolink is committed to providing high-quality products and responsive after-sales service.