Sena Universal Hjelm Clamp Kit (SC-A0315) Instruction Manual

1. Introduktion

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Sena Universal Helmet Clamp Kit (Model SC-A0315). This kit is designed to integrate Sena communication systems with various motorcycle helmets, ensuring clear audio and communication functionality. It is compatible with Sena 20S, 20S EVO, and 30K models.

2. Hvad er der i æsken

Your Sena Universal Helmet Clamp Sættet indeholder følgende komponenter:

• Universal Clamp Enhed
• Bom mikrofon
• Kablet mikrofon
• Kablet bommikrofon
• Dynamiske højttalere
• Mikrofon svampe
• Skum højttalerbetræk
• Hook and Loop Fasteners for Boom/Wired Microphones
• Krog og løkkebefæstelser til højttalere
• Limet overflademonteringsadapter
• Unbrakonøgle
• Højttalerpuder (tykke)
• Gummipuder
• Bom mikrofon holder
• Hook and Loop Fasteners for Holder

The kit provides various microphone and mounting options to suit different helmet types and user preferences.

3. Kompatibilitet

This Universal Helmet Clamp Kit is compatible with the following Sena communication systems:

• Sena 20S
• Sena 20S EVO
• Sena 30K
• Sena 50S

4. Opsætning og installation

Proper installation ensures optimal performance and comfort. Follow these steps to install your clamp kit:

4.1 Montering af Clamp Enhed

Klamp unit attaches to the left side of your helmet. You can choose between the clamp type or the glued surface mounting adapter depending on your helmet's design.

• Clamp Type: Løsn skruerne på clamp using the provided Allen wrench. Slide the clamp between the helmet shell and the inner padding on the left side. Position it securely and tighten the screws.
• Glued Surface Mounting Adapter: Clean the desired mounting area on the left side of your helmet. Peel off the adhesive backing from the adapter and firmly press it onto the helmet surface. Hold for 30 seconds to ensure a strong bond.

4.2 Højttalerinstallation

The dynamic speakers attach inside your helmet's ear pockets.

• Remove the cheek pads and any internal lining that covers the ear pockets.
• Attach the hook and loop fasteners to the back of each speaker.
• Place the speakers directly over your ears inside the helmet. Use speaker pads (thick) or foam speaker covers if needed to bring the speakers closer to your ears for optimal sound quality and to reduce wind noise.
• Route the speaker wires neatly under the helmet padding to the clamp enhed.

4.3 Mikrofoninstallation

Choose the microphone type that best suits your helmet and riding style.

• Boom-mikrofon: Ideal for open-face or modular helmets. Attach the boom microphone to the clamp unit. Position the microphone directly in front of your mouth, ensuring the wind screen is on.
• Kablet mikrofon: Suitable for full-face helmets. Attach the wired microphone to the clamp unit. Secure the microphone inside the helmet near your mouth using the provided hook and loop fasteners or the boom microphone holder.
• Wired Boom Microphone: Provides extended reach for specific helmet designs.

4.4 Installationsvideoguide

For a visual guide on installing the Sena communication system with a helmet clamp kit, please refer to the video below. This video demonstrates the process for a compatible 20S EVO unit, which uses a similar clamp kit installation method.

5. Betjeningsvejledning

Once your clamp kit is installed and your Sena communication system is attached, refer to your specific Sena unit's manual (20S, 20S EVO, or 30K) for detailed operating instructions. However, here are some general functions:

5.1 Tænd/sluk

Typically, to power on your Sena unit, press and hold the Jog Dial and Phone Button simultaneously until you hear an audible prompt like "Hello" or see indicator lights.

5.2 Lydstyrkekontrol

Drej Jog Dial med uret for at øge lydstyrken og mod uret for at sænke lydstyrken.

5.3 Telefonparring

With your Sena unit powered on, press and hold the Phone Button until you hear "Phone Pairing" and see alternating red and blue flashing lights. Then, select your Sena unit from your phone's Bluetooth settings.

5.4 Parring med intercom

To pair with another Sena unit, ensure both units are powered on. Press and hold the Jog Dial on both units simultaneously until you hear "Intercom Pairing" and see red flashing lights. Then, press the Jog Dial on one of the units to initiate pairing.

5.5 Opladning

The charging port is typically located on the back of the main unit, often under a rubber flap. Use a Micro USB cable to charge. A full charge usually takes approximately 2.5 hours, providing up to 12 hours of talk time.

6. Vedligeholdelse

For at sikre din Sena Universal Helmet Cl's lange levetid og optimale ydeevneamp Kit:

• Rengør regelmæssigt clamp unit and connections with a soft, dry cloth.
• Avoid exposing the unit to extreme temperatures or harsh chemicals.
• Ensure all connections are secure before each ride.
• Store the unit in a dry, cool place when not in use.

7. Fejlfinding

Hvis du støder på problemer med din Sena Universal Helmet Clamp Kit, consider the following:

• No Audio/Intercom: Check all cable connections between the clamp unit, speakers, and microphone. Ensure the main Sena unit is securely attached to the clamp.
• Dårlig lydkvalitet: Verify speaker placement directly over your ears. Ensure the microphone is positioned correctly and the windscreen is in place.
• Parringsproblemer: Ensure both devices are in pairing mode and within range. Try resetting both devices and attempting to pair again.
• Strømproblemer: Ensure the unit is fully charged. Check the charging cable and port for any damage.

For more detailed troubleshooting, refer to the full user manual of your specific Sena communication system (20S, 20S EVO, or 30K).

8. Specifikationer

9. Garanti og support

For warranty information, technical support, and additional resources, please visit the official Sena website or contact Sena customer service. Refer to the specific warranty terms provided with your Sena communication system for details on coverage and service procedures.