1. Introduktion
The Radiolink R6DS is a compact 2.4GHz RC receiver designed for use with various remote-controlled aircraft, including drones, airplanes, and fixed-wing models. It supports 6 or 10 channels and offers SBUS, PWM, and PPM signal output options. This receiver is compatible with Radiolink AT9S, AT9S Pro, AT10, and AT10II transmitters, providing reliable performance with excellent anti-interference capabilities.
Figure 1: Radiolink R6DS 2.4GHz RC Receiver.
2. Opsætning
2.1. Kompatibilitet
The R6DS receiver is compatible with Radiolink AT9, AT9S, AT9S Pro, AT10, and AT10II series transmitters. Ensure your transmitter is one of these models for proper operation.
Figure 2: Radiolink R6DS receiver compatible with AT9/AT9S/AT9S Pro and AT10/AT10II transmitters.
2.2. Bindingsproces
To establish a connection between your R6DS receiver and a compatible Radiolink transmitter, follow these steps:
- Power on your Radiolink transmitter. Ensure the RF-MODE is set to ON in the transmitter's parameter settings.
- Connect the R6DS receiver to a power source (4.8-6V DC). The LED indicator on the receiver will illuminate.
- Press and hold the binding button on the R6DS receiver for approximately 1 second. The LED on the receiver will flash quickly, indicating it is in binding mode.
- Observe the transmitter screen. A signal tower icon will appear, confirming successful binding. The receiver's LED will stop flashing and remain solid.
Video 1: Instructions on how to correctly bind the R6DS receiver with your radio.
2.3. Signal Output Modes
The R6DS receiver supports three signal output modes: PWM, PPM, and SBUS. The current mode is indicated by the color of the receiver's LED:
- Blå LED: SBUS/PPM & PWM signal output.
- Rød LED: PWM signal output.
To switch between signal modes, quickly press the binding button twice within 1 second. The LED color will change to reflect the new mode.
Figure 3: Blue LED indicates SBUS/PPM & PWM mode, Red LED indicates PWM mode.
Figure 4: Illustration of 6-channel PWM output (Red-PWM) and 10-channel SBUS/PPM/PWM output (Purple-SBUS/PPM/PWM).
2.4. Transmitter Channel Configuration
When using the R6DS receiver, it is crucial to match the channel selection on your transmitter to the receiver's capabilities. The R6DS supports 6 or 10 channels.
- For AT10/AT10II transmitters, navigate to the SYSTEM menu and select 'CH-SELECT' to 10CH. Failure to do so may result in improper operation.
- For AT9S/AT9S Pro transmitters, ensure the channel selection is also configured appropriately for 10 channels when using the R6DS.
Figure 5: Setting the channel selection to 10CH in the transmitter's SYSTEM menu for AT9S Pro and AT10/AT10II.
Video 2: Guide on configuring a 12-channel AT10II transmitter to work with a 10-channel receiver.
Video 3: Guide on configuring a 12-channel R12DS receiver to work with an AT9S Pro transmitter (relevant for understanding channel configuration principles).
3. Betjening
Once the R6DS receiver is successfully bound and configured, it provides stable and responsive control for your RC model. Key operational features include:
- Hurtigt svar: High resolution ratio of 4096 and stability of 0.5us ensure quick and low-latency connection.
- Fremragende anti-interferens: Utilizes DSSS&FHSS pseudo-random algorithm for robust signal integrity.
- Versatile Signal Output: Supports SBUS, PWM, and PPM signals, making it adaptable to various flight controllers and servo setups.
3.1. Simulator Use
The R6DS receiver can be used with a simulator for practice. This typically involves connecting the receiver to a dongle and then to a computer running simulator software.
Video 4: Demonstrates how to set up the AT9S Pro for simulator use, which can be adapted for R6DS with a PPM receiver.
4. Vedligeholdelse
- Keep the receiver clean and free from dust and moisture.
- Undgå at udsætte receiveren for ekstreme temperaturer eller direkte sollys.
- Regularly inspect all connections for secure fit and any signs of wear or damage.
- Ensure antennas are properly positioned and not obstructed for optimal signal reception.
5. Fejlfinding
5.1. Binding Issues
- No Signal Tower on Transmitter: Ensure the transmitter's RF-MODE is ON. Re-attempt the binding process, ensuring the binding button is pressed for exactly 1 second until the receiver LED flashes quickly.
- Receiver LED Not Solid After Binding: Verify that the transmitter and receiver are within close proximity during binding. Check power supply to the receiver (4.8-6V DC).
5.2. Unstable Servo/Out of Control
- Kanalfejl: This is a common cause. Ensure the transmitter's channel selection (e.g., CH-SELECT) matches the receiver's channel capability (10CH for R6DS). Refer to Section 2.4 for detailed instructions.
- Incorrect Signal Mode: Verify the receiver's signal output mode (PWM, PPM, SBUS) is correctly set for your flight controller or servos. Refer to Section 2.3 for switching modes.
- Strømforsyning: Ensure the receiver is receiving stable power within its operating voltage rækkevidde (4.8-6V).
6. Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 1.4 x 0.59 x 0.39 tommer (0.98" L x 0.59" B x 0.4" H) |
| Varens vægt | 0.176 ounce |
| Varemodelnummer | R6DS |
| Mærke | Radiolink |
| Forbindelsesteknologi | Radio Frequency (2.4GHz DSSS&FHSS) |
| Strømkilde | Battery Powered (4.8-6V DC) |
| Kanaler | 6/10 kanaler |
| Signaludgang | SBUS/PWM/PPM |
| Opløsningsforhold | 4096 |
| Response Stability | 0.5us |
| Anti-polarity Protection | Ja |
Figure 6: Dimensions of the Radiolink R6DS receiver.
Figure 7: Comparison table of various Radiolink receivers, highlighting R6DS specifications.
7. Sikkerhedsoplysninger
- Opbevares utilgængeligt for børn.
- Undgå kontakt med hud og øjne.
- Always ensure correct polarity when connecting power to the receiver. The R6DS features anti-polarity protection, but caution is advised.
- Operate RC equipment in open areas, away from people, animals, and obstacles.
8. Support og garanti
Radiolink provides comprehensive after-sales service and support. For quick assistance, please contact Radiolink Direct store or refer to the online User Instruction manuals. Full user manuals and FAQ troubleshooting files are also available on the product's Amazon sales page.
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact Radiolink customer service directly.
