Produkt overview
The Subzero Lock De-Icer & Lubricant is a specialized solution designed to address frozen lock mechanisms and provide ongoing lubrication. This product is essential for maintaining the functionality of locks in cold weather conditions, ensuring smooth operation and preventing ice buildup.
It effectively thaws ice within lock cylinders and simultaneously lubricates internal components to reduce friction and inhibit future freezing.

Figure 1: Subzero Lock De-Icer and Lubricant product packaging. This image displays the Subzero Lock De-Icer and Lubricant in its retail packaging. The product is a small blue bottle with a red nozzle, designed to thaw frozen locks and lubricate lock cylinders. The packaging highlights key features in English and French.
Vigtige sikkerhedsoplysninger
WARNING: FLAMMABLE. CONTENTS UNDER PRESSURE. IRRITANT.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
OPBEVARES UTILGÆNGELIGT FOR BØRN.
- Beholderen må ikke punkteres eller forbrændes.
- Må ikke udsættes for varme eller opbevares ved temperaturer over 120°F (49°C).
- Anvendes i et godt ventileret område.
- Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. If irritation persists, seek medical attention.
- Do not ingest. If swallowed, do not induce vomiting. Call a Poison Control Center or doctor immediately.
Opsætning
- Forberedelse: Ensure the lock mechanism is clear of any debris or obstructions before application.
- Ryst godt: Shake the bottle thoroughly before each use to ensure proper mixing of the de-icing and lubricating agents.
- Fjern hætten: Carefully remove the protective cap from the nozzle.
Betjeningsvejledning
- Indsæt dyse: Gently insert the tip of the nozzle into the keyhole or lock cylinder opening.
- Anvend produkt: Press down firmly on the top of the bottle to release a small amount of the de-icer and lubricant into the lock mechanism.
- Allow Time: Allow a few moments for the product to penetrate and dissolve any ice. You may hear a slight fizzing sound as the ice melts.
- Testlås: After a short wait, attempt to insert the key and turn the lock. If the lock remains stiff or frozen, reapply a small amount of the product.
- Smøring: The product also acts as a lubricant, helping to ensure smooth operation of the lock after de-icing.
Opretholdelse
Regular application of Subzero Lock De-Icer & Lubricant can help prevent locks from freezing in cold conditions. Apply periodically to external locks, especially before anticipated cold snaps, to keep them operating smoothly.
- Opbevar produktet på et køligt, tørt sted væk fra direkte sollys og varmekilder.
- Ensure the cap is securely replaced after each use to prevent evaporation and contamination.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lock remains frozen after application. | Insufficient product applied or severe ice buildup. | Reapply a small amount of de-icer and allow more time for it to work. Ensure the nozzle is fully inserted. |
| Product does not dispense. | Nozzle blockage or empty container. | Check the nozzle for any obstructions and clear if necessary. Ensure the bottle contains liquid. |
| Lock is stiff after de-icing. | Residual ice or lack of lubrication. | Apply another small amount to enhance lubrication. Work the key gently to distribute the lubricant. |
Specifikationer
- Mærke: Subzero
- Model: 22-5-00500-SZ
- Produktnavn: Lock De-Icer & Lubricant
- Bind: 18.5 ml (0.62 fl oz)
- Fabrikant: Hopkins Mfg
- Produktdimensioner: 12.4 x 7.3 x 7 tommer
- Varens vægt: 0.01 ounce
- Anbefalede anvendelser: Vehicle, Door
- ASIN: B07FLKVW91
- UPC: 0079976005005
Supportinformation
For technical assistance or product inquiries, please contact the manufacturer:
Fabrikant: Hopkins Manufacturing Corporation
Adresse: 428 Peyton, Emporia, KS 66801-1157, USA
Telefon: (620) 342-7320
Webwebsted: www.HopkinsMfg.com
Please have your product model number (22-5-00500-SZ) and purchase details ready when contacting support.





