1. Introduktion
The MEKE Macro Ring Lite Flash Light MK-14EXT is specifically designed for close-up photography. It produces a ring of light that effectively reduces shadows, making it ideal for macro shots. The flash tube is positioned in front of your lens, ensuring even illumination around the subject. This unit supports AF assist lamp functionality and TTL mode for precise exposure control. It utilizes high-quality LED lights to achieve natural light reproduction and offers various flash functions to meet diverse photographic needs.
Figure 1: MEKE Macro Ring Lite Flash Light MK-14EXT mounted on a Canon EOS DSLR camera.
2. Opsætning
2.1. Batteriinstallation
The flash unit requires four (4) AA/LR6 alkaline batteries for operation. Open the battery compartment located on the main flash unit and insert the batteries, ensuring correct polarity. Close the compartment securely.
Figur 2: Detaljeret view of the flash unit, highlighting the battery compartment and controls.
2.2. Attaching Adapter Rings
Seven (7) adapter rings are included to ensure compatibility with various lens sizes: 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, and 77mm. Select the adapter ring that matches the filter thread size of your camera lens. Screw the appropriate adapter ring onto the front of your lens.
2.3. Mounting the Flash Unit and Ring Light
- Slide the main flash unit onto your camera's hot shoe and secure it firmly.
- Attach the Macro Ring Lite head to the adapter ring on your lens. Ensure it clicks into place or is securely fastened.
Figur 3: Forside view of the Macro Ring Lite attached to a camera lens.
3. Betjeningsvejledning
3.1. Tænd/sluk
Press the 'ON/OFF' button on the main flash unit to power the device on or off. The large LCD display will illuminate, showing current settings.
3.2. Flash Modes and Adjustments
- TTL-tilstand: The flash automatically adjusts its output based on the camera's light evaluation system, providing natural light for various shooting conditions.
- Manuel justering: Use the control dial to set the flash ratio control from 1:8 to 1:1 to 8 in 1/2-stop increments. This allows for precise brightness output and flexible control.
- Left and Right Flash Function: The unit supports individual or combined firing of the two flash tubes. This feature allows for creating a three-dimensional effect on your subject by adjusting the light from the left and right sides.
- AF Assist Lamp: The built-in AF assist lamp helps the camera achieve focus in low-light conditions.
- Flasheksponeringskompensation: Adjust flash exposure compensation manually in 1/3-stop increments to fine-tune lighting.
Figure 4: Manual adjustment and left/right flash function options.
3.3. Optical Transmission and Multiple Flash
The flash supports optical transmission for master and slave modes, enabling different flash modes and combinations with other compatible flash units.
Figure 5: Optical transmission and multiple flash setup.
3.4. Strømsparetilstand
To conserve battery life, the unit will enter sleeping mode after 60 seconds of no operation. Press any key to wake it up.
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Maks synkroniseringshastighed | 1/320s |
| Type | Nærbillede |
| Vejledning nr. | 14/46 (ISO100, in meter/feet) |
| Effektiv afstand | Approx. 20cm-5m |
| Farvetemperatur | 5500K |
| Flashdækning | 80° degrees in either direction |
| Firing Configuration | Two flash tubes can be fired together or single |
| Flash Ratio Control | 1:8~1:1~8 in 1/2-stop increments |
| Flasheksponeringskompensation | Manual, FBE: in 1/3-stop increments |
| Focusing Lamp Dækning | Approx. 40° top and bottom and 45° left and right |
| Focusing Lamp Til tiden | Ca. 20 sek. |
| Recycling Timer | Approx. 0.1~5sec. |
| Supply Battery | 4xAA/LR6 alkaline batteries |
| Batterilevetid | Approx. 100~800 flashes (with AA/LR6 alkaline batteries) |
| Ekstern strømkilde | Compact battery pack Canon CP-E4 |
| Kompatible monteringer | Canon EOS (e.g., 5D Mark II/7D/60D/600D/550D/500D/1000D/1100D/5D/50D/40D/450D/600D/650D/5D Mark III) |
5. Vedligeholdelse
To ensure the longevity and optimal performance of your MEKE Macro Ring Lite Flash Light, follow these general maintenance guidelines:
- Keep the unit clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the flash to extreme temperatures or direct sunlight for prolonged periods.
- Fjern batterierne, hvis enheden ikke skal bruges i længere tid, for at forhindre lækage.
- Handle the flash and its components with care to prevent physical damage.
6. Fejlfinding
If you encounter issues with your MEKE Macro Ring Lite Flash Light, consider the following basic troubleshooting steps:
- Blitzen går ikke ud: Check battery levels and ensure they are correctly inserted. Verify the flash unit is securely mounted on the camera's hot shoe. Confirm the camera and flash settings are compatible.
- Uneven lighting: Ensure the Macro Ring Lite head is properly attached to the lens and the correct adapter ring is used. Adjust the left/right flash ratio for desired lighting.
- Enheden tænder ikke: Replace batteries with fresh ones. Ensure the ON/OFF switch is in the 'ON' position.
Ved vedvarende problemer henvises til det detaljerede afsnit om fejlfinding i den fulde brugermanual eller kontakt kundesupport.
7. Garanti og support
This product includes a Warranty Card. Please retain your purchase receipt and the warranty card for any warranty claims. For technical support or service inquiries, please refer to the contact information provided on the warranty card or the official MEKE webwebsted.
