Indledning
Thank you for choosing the SILCA Pista Floor Pump. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new pump. Designed for quick and efficient inflation of bicycle tires, the SILCA Pista combines high-pressure capability with durable construction and premium components.
Produkt overview
Figure 1: The SILCA Pista Floor Pump in red with a black single-sided base and wood handle.
Nøglefunktioner:
- Højtryksdesign: Delivers high pressure for quick and efficient inflation of bicycle tires.
- Stålkonstruktion: Durable steel construction ensures long-lasting quality and performance.
- Wood Handle: Ergonomic Ash wood handle provides a comfortable grip.
- Premium Presta and Schrader Chuck: Equipped with machined aluminum chucks for various valve types.
- Leather Gasket: Includes a leather gasket for a secure and airtight pumping.
Opsætning
The SILCA Pista Floor Pump comes largely pre-assembled. Follow these steps to prepare your pump for first use:
- Unboxing: Tag forsigtigt pumpen ud af emballagen. Undersøg den for synlige skader.
- Inspektion af slange og borepatron: Ensure the hose is securely attached to the pump body and the chucks (Presta and Schrader) are properly connected to the hose.
- Base stabilitet: Place the pump on a flat, stable surface. The single-sided base provides stability during operation.
Betjeningsvejledning
Follow these steps for effective and safe tire inflation:
- Forbered dækventilen:
- For Presta valves, unscrew the valve core lock nut counter-clockwise until it is loose. Press down briefly on the valve core to release a small amount of air and ensure it is not stuck.
- For Schrader valves, no special preparation is typically needed.
- Fastgør borepatronen:
- Select the appropriate chuck (Presta or Schrader).
- Firmly press the chuck onto the tire valve until it is fully seated. Ensure a tight seal to prevent air leakage.
Figure 2: The SILCA Pista Floor Pump chuck attached to a bicycle tire valve.
- Pump dækket op:
- Hold the pump handle firmly and place your feet on the pump's base for stability.
- Push the handle down smoothly and completely to inflate the tire. Pull the handle back up to draw in more air.
- Repeat this motion until the desired pressure is reached.
Figure 3: Proper technique for using the SILCA Pista Floor Pump.
- Monitortryk:
- Observe the pressure gauge located at the base of the pump. Inflate to the recommended PSI (Pounds per Square Inch) or BAR for your tire.
- Note: The gauge scale is condensed at higher pressures. Read carefully.
Figur 4: Nærbillede view of the pressure gauge on the pump's base.
- Fjern borepatronen: Once the desired pressure is achieved, quickly and firmly pull the chuck straight off the valve.
- Secure Presta Valve (if applicable): For Presta valves, screw the valve core lock nut clockwise until it is finger-tight.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your SILCA Pista Floor Pump.
- Leather Gasket Care: The leather gasket is crucial for an airtight seal. Over time, it may dry out or wear.
- If pumping becomes difficult or air leaks are detected, the leather gasket may need lubrication or replacement.
- Apply a small amount of leather conditioner or a suitable lubricant to the gasket to keep it supple.
- Replacement leather gaskets are available from SILCA or authorized dealers.
- Generel rengøring: Wipe down the pump body and hose with a damp klud til at fjerne snavs og støv. Undgå at bruge skrappe kemikalier.
- Opbevaring: Store the pump in a dry, clean environment away from extreme temperatures.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pump not building pressure / Air leaking |
|
|
| Gauge not reading correctly or stuck |
|
|
| Pump handle feels loose or detached |
|
|
Specifikationer
- Modelnavn: PISTA
- Varenummer: AM-PU-001-ASY-0101
- Farve: Rød
- Materialer: Alloy Steel, Aluminum, Brass, Leather, Wood
- Strømkilde: Manuel
- Maksimalt tryk: 15 Bars (approximately 220 PSI)
- Emnedimensioner (LxBxH): 25.98 x 9.06 x 3.94 tommer
- Emnepakkemål (LxBxH): 27 x 9.5 x 3 tommer
- Pakkevægt: 0.66 kilo
- UPC: 853740005886
Garanti og support
SILCA products are built for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official SILCA website. For technical support, replacement parts, or service inquiries, please contact SILCA customer service directly.
SILCA Official Webwebsted: www.silca.cc
Kontaktoplysninger: Der henvises til webhjemmeside for de seneste kontaktoplysninger.
