Sena SF1 Motorcykel Bluetooth Kommunikationssystem Brugermanual

1. Introduktion

The Sena SF1 Bluetooth Communication System is designed to provide essential communication features for motorcycle riders. This system facilitates 2-way intercom communication with a passenger, allowing for clear conversations up to 100 meters (110 yards) in open terrain. It also enables seamless connectivity with your mobile device for streaming music, managing phone calls, and receiving turn-by-turn GPS directions. Key features include VOX Phone commands, Audio Overlay, Quick Charging, and microphone mute options, enhancing your riding experience with convenience and safety.

2. Pakkens indhold

The Sena SF1 package includes the following components:

• Sena SF1 Main Unit
• Hjelm Clamp Kit
• Højttalere
• Kablet bommikrofon
• Kablet mikrofon
• USB Power & Data Cable (USB-C type)
• Velcropuder til højttalere
• Velcro Pad for Wired Boom Microphone
• Velcro Pad for Wired Microphone
• Højttalerpuder (tykke)
• Unbrakonøgle

Note: The specific component "Sena 843-01297" refers to the main unit or a specific part number within the kit.

3. Produktet er slutview

The Sena SF1 unit features a sleek, low-profile design with intuitive controls for easy operation while riding.

Figur 3.1: Øverst View of Sena SF1 Main Unit. This image displays the top of the Sena SF1 communication system, highlighting the central control button and the plus (+) and minus (-) buttons for volume and navigation. A blue indicator light is visible at the top center.

Figur 3.2: Vinklet View of Sena SF1 Main Unit. An angled perspective of the SF1 unit, showing its compact form factor and the arrangement of its primary control buttons. The blue indicator light is also visible.

Figure 3.3: Sena SF1 USB Charging Port. This image focuses on the USB charging port, typically located on the side or bottom of the unit, protected by a rubber flap to ensure water resistance.

Figure 3.4: Sena SF1 Side View with Helmet Clamp. En side view of the SF1 unit attached to a helmet clamp, illustrating how the unit integrates with the helmet and the connection points for speakers and microphone cables.

3.1 Kontroller og indikatorer

• Midter knap: Multi-functional button for power, pairing, and call management.
• (+) knap: Increases volume, navigates forward through menus or tracks.
• (-) knap: Decreases volume, navigates backward through menus or tracks.
• LED-indikator: Displays device status (power, charging, Bluetooth connection).

4. Installation

Proper installation ensures optimal performance and comfort. The SF1 is designed to fit on almost any helmet.

4.1 Montering af hovedenheden

1. Choose a suitable location on the left side of your helmet for the clamp enhed.
2. Loosen the screws on the helmet clamp and slide it between the outer shell and the inner padding of the helmet. Tighten the screws securely.
3. Alternatively, use the adhesive mount if the clamp unit is not suitable for your helmet type. Ensure the surface is clean and dry before applying.
4. Slide the SF1 main unit onto the mounted clamp indtil den klikker på plads.

4.2 Installation af højttalere og mikrofon

1. Attach the speakers to the Velcro pads inside the helmet's ear pockets. Use the thick speaker pads if needed for better fit and audio quality.
2. Connect the speaker cables to the main unit.
3. For full-face helmets, attach the wired microphone to the inside of the chin bar using the Velcro pad. Position it close to your mouth.
4. For open-face or modular helmets, attach the wired boom microphone to the inside of the helmet, ensuring it is positioned correctly for clear voice pickup.
5. Route all cables neatly under the helmet padding to avoid interference and ensure comfort.

5. Opsætning

5.1 Tænd/sluk

• Tænd: Tryk og hold på Center-knap og den (+) Knap i 1 sekund.
• Sluk: Tryk og hold på Center-knap og den (+) Knap i 5 sekunder.

5.2 Bluetooth Pairing with Mobile Phone

1. With the SF1 powered off, press and hold the Center-knap for 5 seconds until the LED flashes red and blue alternately, indicating pairing mode.
2. Aktiver Bluetooth på din mobiltelefon, og søg efter enheder.
3. Select "Sena SF1" from the list of detected devices.
4. If prompted, enter PIN "0000". The LED will turn blue when pairing is successful.

5.3 Intercom Pairing (2-Way)

1. Ensure both SF1 units are powered on.
2. On one unit, press and hold the Center-knap i 5 sekunder, indtil LED'en blinker rødt.
3. On the second unit, press and hold the Center-knap i 5 sekunder, indtil LED'en blinker rødt.
4. The units will automatically pair and connect. The LED on both units will turn blue.

5.4 Sena Utility App

For advanced configuration and firmware updates, download the Sena Utility App from your smartphone's app store. The app allows you to customize settings, manage speed dial presets, and access a quick guide.

6. Betjeningsvejledning

6.1 Lydstyrkekontrol

• Forøg lydstyrke: Tryk på (+) Knap.
• Skru ned for lydstyrken: Tryk på (-) knap.

6.2 Musikfunktioner

• Afspil/sæt musik på pause: Tryk på Center-knap i 1 sekund.
• Næste nummer: Tryk på (+) Knap i 1 sekund.
• Forrige nummer: Tryk på (-) knap i 1 sekund.

6.3 Phone Call Functions

• Besvar opkald: Tryk på Center-knap.
• Afslut opkald: Tryk på Center-knap i 2 sekunder.
• Afvis opkald: Tryk på Center-knap i 2 sekunder, når der kommer et opkald.
• Voice Dial (VOX Phone): Tryk på Center-knap i 3 sekunder.
• Mikrofon mute: Tryk på (+) Knap og (-) knap simultaneously for 1 second during a call.

6.4 Intercom-kommunikation

• Start/Slut samtaleanlæg: Tryk på Center-knap.
• Audio Overlay: The SF1 supports Audio Overlay, allowing you to listen to music or GPS instructions while engaged in intercom conversation. The audio levels will adjust automatically.

6.5 GPS-navigation

Once paired with your smartphone, turn-by-turn GPS directions from your navigation app will be transmitted directly to your SF1 speakers. Audio Overlay ensures that navigation prompts are heard even during other audio activities.

7. Vedligeholdelse

7.1 Opladning af batteriet

• Connect the SF1 to a USB power source using the provided USB Power & Data Cable.
• The LED indicator will turn red during charging and blue when fully charged.
• En fuld opladning tager typisk ca. 1.5 timer.
• The SF1 offers a talk time of up to 13 timer på fuld opladning.
• The Quick Charging feature allows for faster charging when time is limited.

7.2 Rengøring og opbevaring

• Tør enheden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Ensure the USB port cover is securely closed to maintain water resistance.
• Store the SF1 in a cool, dry place when not in use.

8. Fejlfinding

8.1 Fabriksindstilling

If the SF1 is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset, press and hold the Center-knap for 12 seconds until the LED flashes red rapidly. Then, tap the Center-knap to confirm. The unit will power off and reset to default settings.

8.2 Fælles problemer

• Ingen strøm: Ensure the battery is charged. Connect to a charger and check the LED indicator.
• Ingen lyd: Check speaker connections. Ensure volume is not at minimum. Re-pair with your device.
• Intercom Disconnection: Ensure both units are within range (100 meters in open terrain) and re-initiate intercom connection.
• Problemer med Bluetooth-parring: Ensure the SF1 is in pairing mode (red and blue flashing LED) and your phone's Bluetooth is enabled. Try restarting both devices.

9. Specifikationer

10. Garanti og support

10.1 Garantioplysninger

Sena products are covered by a limited warranty against manufacturing defects. The EU Spare Part Availability Duration is 2 years. For specific warranty terms and conditions, please refer to the official Sena webwebstedet eller kontakt kundesupport. Gem din købsbevis til garantikrav.

10.2 Kundesupport

For technical assistance, troubleshooting, or general inquiries, please visit the official Sena website for support resources, FAQs, and contact information. You can also utilize the Sena Utility App for quick access to support and product information.