Utilitech GYQ27-W Bevægelsessensor Brugsanvisning

Produkt overview

The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.

Figur 1: Front view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.

Nøglefunktioner

• Automatisk lysstyring: Turns lights on when motion is detected.
• Justerbar timer: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
• Bred dækning: Provides up to 240° coverage and 69-ft of downward perimeter protection.
• Dusk-to-Dawn sensor: Automatically activates at dusk and deactivates at dawn.
• Bred kompatibilitet: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
• Energieffektivitet: Features 2-level brightness technology.
• Manuel tilsidesættelse: Allows the light to operate constantly for a selected period.

Opsætning og installation

Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.

Sikkerhedsforanstaltninger

• Sluk altid for strømmen ved afbryderen før installation eller service.
• Ensure wiring connections are secure and comply with local electrical codes.
• Overskrid ikke det maksimale wattage rating of the connected lighting fixture.

Installationstrin

1. Sluk for strømmen: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage tester.
2. Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
3. Tilslut ledninger: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
4. Monteringssensor: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
5. Gendan strøm: Når alle forbindelser er sikre, og sensoren er monteret, skal du tænde for strømmen igen ved afbryderen.

Betjeningsvejledning

The GYQ27-W motion sensor offers several adjustable settings to customize its operation.

Justering af indstillinger

• Tidsindstilling: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
• Test mode: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
• Dusk-to-Dawn-funktion: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
• Følsomhedsjustering: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.

Manuel tilsidesættelse

To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.

Opretholdelse

The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.

• Rensning: Tør sensorlinsen af ​​med jævne mellemrum med en blød klud.amp cloth to remove dust, dirt, or cobwebs that may obstruct the sensor's viewBrug ikke slibende rengøringsmidler.
• Inspektion: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
• Miljøfaktorer: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.

Fejlfinding

If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:

Specifikationer

Garanti og support

Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.

You may also visit the official Utilitech webwebsted for de mest opdaterede oplysninger og supportressourcer.