Teac TN-180BT-B 3-Speed Analog Turntable with Phono EQ and Bluetooth

1. Introduktion

Tak for købetasing the Teac TN-180BT-B 3-Speed Analog Turntable. This turntable is designed for music enthusiasts, offering a classic vinyl listening experience with modern convenience, including Bluetooth connectivity. Its belt-drive motor ensures clear sound, and the high-density MDF cabinet helps dampen vibrations for richer audio. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your turntable.

Figure 1: Teac TN-180BT-B Turntable with dust cover open, showcasing tallerkenen og tonearmen.

2. Sikkerhedsoplysninger

• Læs alle instruktioner før betjening af enheden.
• Hold enheden væk fra vand eller fugt.
• Bloker ikke ventilationsåbninger.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Tag stikket ud af enheden under tordenvejr, eller når den ikke skal bruges i længere perioder.
• Overlad al service til kvalificeret servicepersonale.

3. Hvad er der i æsken

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Pladespiller enhed
• Rubber Mat x 1
• EP Adapter x 1
• MM-type Cartridge x 1 (Installed)
• Støvdæksel x 1
• Støvdæksel hængsler x 2
• RCA lydkabel x 1
• AC Adapter (GPE053A-V120050-Z) x 1
• Brugervejledning (inklusive garantikort)

4. Opsætning

4.1 Placering

Place the turntable on a flat, stable surface away from direct sunlight, heat sources, and excessive dust. Ensure it is not placed near speakers or other devices that may cause vibrations, which can affect sound quality.

4.2 Montering af støvdæksel

Attach the two dust cover hinges to the designated slots on the back of the turntable unit. Then, carefully insert the dust cover onto the hinges. The dust cover protects the platter and stylus from dust when not in use.

4.3 Montering af plade og bånd

1. Place the platter onto the center spindle of the turntable.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Carefully pull the belt through the opening on the platter and loop it around the motor pulley. Ensure the belt is not twisted.
4. Læg gummimåtten oven på fadet.

4.4 Cartridge and Stylus

The MM-type cartridge is pre-installed on the tonearm. Handle the stylus with care to avoid damage. A stylus guard is typically in place during shipping; remove it before playing records.

4.5 Lydforbindelser

The TN-180BT-B offers both wired and wireless audio output options.

• Wired Connection (RCA): Connect the supplied RCA audio cable from the "L" and "R" output jacks on the back of the turntable to the corresponding input jacks on your amphøjttaler, receiver eller aktive højttalere.
• Phono EQ Switch: On the back of the turntable, locate the "PHONO EQ" switch.
  • Set to "ON" if connecting to an amplifier/receiver without a built-in phono input (e.g., AUX, LINE IN). This activates the internal pre-amplivligere.
  • Set to "THRU" if connecting to an amplifier/receiver with a dedicated phono input.
• Bluetooth-forbindelse:
  1. Sørg for, at din Bluetooth-højttaler eller hovedtelefoner er i parringstilstand.
  2. Turn on the turntable. The Bluetooth indicator light will flash, indicating it's searching for a device.
  3. Once paired, the Bluetooth indicator light will remain solid.
  4. Hvis parringen mislykkes, skal du slukke begge enheder og prøve igen.

Figure 2: Rear panel of the Teac TN-180BT-B, highlighting the RCA output jacks and the PHONO EQ switch.

4.6 Strømtilslutning

Connect the supplied AC adapter to the DC IN 12V jack on the back of the turntable, then plug the adapter into a wall outlet. The power switch is located on the back of the unit.

5. Operating the Turntable

5.1 Tænd/sluk

To turn the turntable ON, push the power switch located on the back of the unit to the "ON" position. To turn it OFF, push the switch to "STANDBY".

5.2 Afspilning af en plade

1. Place a record on the platter. If playing a 45 RPM single, use the EP adapter.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector switch on the turntable.
3. Lås tonearms-c'en opamp.
4. Raise the tonearm using the cueing lever.
5. Manually position the tonearm over the desired starting groove of the record.
6. Sænk forsigtigt tonearmen ved hjælp af cue-håndtaget. Pennen vil synke ned på pladen, og afspilningen vil begynde.
7. At the end of the record, the auto-return mechanism will automatically lift the tonearm and return it to the tonearm rest.
8. When finished listening, raise the tonearm, return it to the rest, and secure it with the tonearm clamp. Sluk for strømmen.

Figur 3: Forside view of the Teac TN-180BT-B, showing the platter, tonearm, and speed selector.

6. Vedligeholdelse

6.1 Rengøring af enheden

• Tør støvdækslet og kabinettet af med en blød, tør klud.
• For genstridigt snavs, brug en let damp klud og tør derefter grundigt.
• Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler, da de kan beskadige overfladen.

6.2 Pleje af pennen

• Gently clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front.
• Undgå at berøre pennen med fingrene.
• The stylus typically lasts for approximately 300-500 hours of playback. Replace it when sound quality deteriorates or distortion occurs. Consult your dealer for replacement stylus information.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the Warranty Card included in your product packaging. For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please visit the official Teac webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

Du kan finde mere information og supportressourcer på Teac Store on Amazon.