Nerf Modulus Ghost Ops Shadow ICS-6 brugsanvisning

Vigtige sikkerhedsoplysninger

ADVARSEL: KVÆLNINGSFARE - Små dele kan dannes. Ikke egnet til børn under 3 år.

Sigt ikke mod øjne eller ansigt. Brug kun officielle NERF-pile. Andre pile opfylder muligvis ikke sikkerhedsstandarderne. Pile eller blaster må ikke ændres.

Opsyn af voksne anbefales under brug.

1. Opsætning

1.1 Udpakning

Carefully remove all components from the packaging. Ensure all parts listed in the 'What's in the Box' section are present.

• Blaster
• Barrel Extension
• 6 Dart
• Instruktioner

Image 1.1: The Nerf Modulus Ghost Ops Shadow ICS-6 blaster and its components as seen in the retail packaging.

1.2 Batteriinstallation

The blaster requires 3 AAA alkaline batteries for the illumination feature. Demo batteries are included.

1. Find batterirummet på blasteren.
2. Skru dækslet til batterirummet af med en stjerneskruetrækker (medfølger ikke).
3. Insert 3 new AAA alkaline batteries, ensuring correct polarity (+/-).
4. Sæt batterirummets dæksel på igen og fastgør det med skruen.

Image 1.2: The blaster's battery requirement for its illumination feature.

1.3 Assembling the Blaster

The Illuminator Barrel can be attached to the front of the blaster.

1. Align the barrel extension with the front attachment point of the blaster.
2. Push the barrel extension firmly until it clicks into place.
3. To remove, press the release button (if present) or pull the barrel extension off.

Image 1.3: Attaching the illuminator barrel to customize the blaster.

Image 1.4: Detaching the illuminator barrel from the blaster.

2. Betjening af blæseren

2.1 Indlæsning af dartpile

The Shadow ICS-6 blaster features a breech-load design with an internal clip system that holds up to 6 darts.

1. Open the breech by pulling back the priming handle.
2. Insert one dart at a time into the internal clip system. Ensure darts are fully seated.
3. Close the breech by pushing the priming handle forward until it locks.

Image 2.1: Loading a dart into the blaster's internal clip system.

Billede 2.2: Detaljeret view of dart loading.

2.2 Affyring af blasteren

Once darts are loaded and the blaster is primed:

1. Aim the blaster at a safe target.
2. Tryk på aftrækkeren for at affyre én pil.
3. To fire another dart, repeat the loading and priming steps.

Image 2.3: The blaster and included darts.

2.3 Illumination Feature

The blaster features a clear housing that illuminates when the light activator is pressed. This allows for both stealth and illuminated modes.

• Stealth Mode: Keep the blaster clear (lights off) for discreet action.
• Illuminated Mode: Press the light activator button to illuminate the blaster, useful for low-light environments. The attached Illuminator Barrel will also light up.

Image 2.4: The blaster in illuminated mode.

Image 2.5: The blaster in clear, stealth mode.

Image 2.6: The illuminator barrel glowing when attached.

3. Vedligeholdelse

3.1 Generel pleje

• Keep the blaster clean by wiping it with a dry cloth. Do not use harsh chemicals or immerse in water.
• Opbevar blæseren et køligt, tørt sted væk fra direkte sollys.
• Fjern batterierne, hvis blasteren ikke skal bruges i længere tid, for at forhindre lækage.

3.2 Pleje af dartpile

• Use only official Nerf darts to ensure optimal performance and safety.
• Inspect darts for damage before use. Damaged darts can affect performance and potentially jam the blaster.
• Do not modify darts.

4. Fejlfinding

5. Specifikationer