MPM MZP-01

MPM MZP-01 Vertikal tøjdamper Brugsanvisning

Model: MZP-01 | Brand: MPM

Produkt overview

This steam brush is designed to eliminate wrinkles, deodorize, and disinfect all types of fabrics quickly and easily. It is ready for use in seconds. The long cable allows for comfortable movement across the fabric without annoying pulling. It can be used on all types of fabrics and garments without fear of damage. It also includes an accessory for delicate garments and another for thicker fabrics.

Nøglefunktioner

Sikkerhedsinstruktioner

Læs alle sikkerhedsinstruktioner omhyggeligt, inden apparatet tages i brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

Komponenter

MPM MZP-01 Vertical Garment Steamer

Image showing the complete MPM MZP-01 Vertical Garment Steamer, highlighting its main body, water tank, and steam head.

MPM MZP-01 Steamer with steam emitting

Image of the MPM MZP-01 steamer in operation, with visible steam emanating from the steam head, demonstrating its function.

Hand holding MPM MZP-01 Steamer

Image showing a hand holding the MPM MZP-01 steamer, illustrating its ergonomic design and compact size for handheld use.

MPM MZP-01 Steamer with bristle brush attachment

Close-up image of the MPM MZP-01 steamer head with the bristle brush attachment installed, demonstrating one of the interchangeable accessories.

Liste over komponenter

Opsætning

  1. Ensure the appliance is unplugged from the power outlet before beginning.
  2. Remove the water tank from the main unit by gently pulling it downwards.
  3. Open the water tank cap and fill with distilled or demineralized water up to the 'MAX' line (250 ml capacity). Do not overfill. Using tap water may lead to mineral buildup.
  4. Securely close the water tank cap and reattach the tank to the main unit, ensuring it clicks into place.
  5. Select the appropriate attachment (velvet brush for delicate fabrics, bristle brush for thicker fabrics) and securely attach it to the steam head if needed.
  6. Sæt strømkablet i en passende stikkontakt (220 volt).

Betjeningsvejledning

Dampende beklædningsgenstande

  1. After plugging in, the steamer will begin to heat up. It is ready for use in approximately 30-45 seconds.
  2. Hang the garment on a hanger. For best results, pull the fabric taut with one hand while steaming with the other.
  3. Press and hold the steam button to release continuous steam. Move the steam head slowly over the fabric, from top to bottom.
  4. Ved genstridige rynker, kør damphovedet hen over området flere gange.
  5. Use the velvet brush for delicate materials like silk or satin. Use the bristle brush for heavier fabrics like wool or denim to help lift fibers and remove lint.
  6. Release the steam button to stop steaming.
  7. Efter dampning skal tøjet køle af og tørre helt, før det tages på eller opbevares.

Steaming Curtains and Upholstery

  1. Ensure curtains or upholstery are suitable for steam treatment. Test on an inconspicuous area first.
  2. Hold the steamer upright and move the steam head over the fabric, maintaining a slight distance.
  3. Do not over-saturate the fabric.

Vedligeholdelse og pleje

Rensning

  1. Tag altid stikket ud af stikkontakten, og lad damperen køle helt af, inden du rengør den.
  2. Tøm eventuelt resterende vand fra tanken.
  3. Tør ydersiden af ​​damperen af ​​med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  4. Clean the steam head regularly to prevent mineral buildup. Use a cotton swab or small brush to clear steam vents if necessary.

Afkalkning

To maintain optimal performance and extend the life of your steamer, regular descaling is recommended, especially in areas with hard water.

  1. Bland en opløsning af 50% hvid eddike og 50% destilleret vand.
  2. Pour the solution into the water tank up to the 'MAX' line.
  3. Plug in the steamer and allow it to heat up. Run the steamer until half of the solution has been used, directing steam into a sink or bucket.
  4. Unplug the steamer and let it cool for 30 minutes.
  5. Gentag dampningsprocessen med den resterende opløsning.
  6. Empty the tank and rinse thoroughly with fresh distilled water. Fill with fresh distilled water and run the steamer until the tank is empty to flush out any remaining vinegar.

Opbevaring

Ensure the steamer is completely cool and dry before storing. Store in a cool, dry place, away from direct sunlight and moisture.

Fejlfinding

ProblemMulig årsagLøsning
Ingen dampVandbeholder tomFill water tank with distilled or demineralized water.
Ingen dampSteamer not heatedAllow 30-45 seconds for the steamer to fully heat up.
Ingen dampSteam vents clogged with mineral buildupUdfør afkalkningsproceduren som beskrevet i afsnittet Vedligeholdelse.
Water spitting/leakingOverfyldt vandtankDo not fill past the 'MAX' line. Empty excess water.
Water spitting/leakingMineralopbygningUdfør afkalkningsproceduren.
Water spitting/leakingDampkogeren er ikke varm nokAllow full heating time before use.
Dårlig rynkefjerningIkke nok dampEnsure water tank is full and steamer is fully heated. Press and hold steam button.
Dårlig rynkefjerningFabric not tautPull fabric taut while steaming to allow steam to penetrate effectively.

Specifikationer

Garanti og support

For product support or inquiries, please refer to the retailer's customer service or the manufacturer's official webwebsted. Specifikke garantioplysninger kan variere afhængigt af region og forhandler.

This product is subject to the return policy of the retailer from which it was purchased. For purchases made on Amazon.com.be, a 30-day return policy applies for refunds or replacements, fulfilled by Amazon.

Relaterede dokumenter - MZP-01

Preview MPM LR-027-86 & LR-027-84 Fabric Shaver User Manual
User manual for the MPM LR-027-86 and LR-027-84 fabric shavers, providing instructions on safe usage, operation, cleaning, and maintenance.
Preview Brugermanual til MPM MPM-216-CF-serien af ​​køleskab/fryser
Denne manual indeholder instruktioner til køleskabet/fryseren MPM-216-CF-26, MPM-216-CF-27 og MPM-216-CF-28, herunder sikkerhedsoplysninger, daglig brug, installation, fejlfinding og vedligeholdelse.
Preview Instrukcja Obsługi Płyty Indukcyjnej MPM-60-IM-15
Instrukcja obsługi dla płyty indukcyjnej MPM model MPM-60-IM-15, zawierająca informacje of montażu, użytkowaniu, bezpieczeństwie, konserwacji, rozwiązywaniu problemów, danancjich or techniczjich.
Preview MPM Chłodziarko-zamrażarka MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E - Instrukcja Obsługi
Kompleksowa instrukcja obsługi for chłodziarko-zamrażarek MPM modeli MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E. Zawiera informacje o bezpieczeństwie, instalacji, codziennym użytkowaniu, pielęgnacji, czyszczeniu, rozwiązywaniu problemów og danych technicznych.
Preview MPM-20-KMT-04 Mikrovlnná truba: Opnåelse og fortæring
Kompletní návod k obsluze pro mikrovlnnou troubu MPM-20-KMT-04. Obsahuje důležité bezpečnostní pokyny, informace o instalaci, čištění, provozu and údržbě.
Preview Navn k obsluze: Mikrovlnná trouba MPM-20-KMT-05
Kompletní uživatelská příručka pro mikrovlnnou troubu MPM-20-KMT-05 od výrobce MPM. Obsahuje podrobné pokyny k bezpečnému používání, instalaci, čištění og funkcím spotřebiče.