1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Red Lion Controls/N-Tron PAXD0000 Universal DC Input Meter. Please read this manual thoroughly before using the device and retain it for future reference.
The PAXD0000 is designed for universal DC input measurement applications, offering reliable performance in industrial environments.
2. Sikkerhedsoplysninger
Always observe standard safety precautions during installation and operation. Failure to comply with safety warnings may result in injury or damage to the equipment.
- Sørg for, at strømmen er afbrudt, før du udfører nogen form for ledningsføring eller vedligeholdelse.
- Installation og service bør kun udføres af kvalificeret personale.
- Brug ikke enheden i miljøer, der overskrider de angivne driftsforhold.
- Beskyt enheden mod fugt, støv og ekstreme temperaturer.
3. Produktet er slutview
The Red Lion PAXD0000 Universal DC Input Meter features a clear digital display and intuitive control buttons for easy configuration and monitoring.
Figure 1: Front panel of the PAXD0000 meter. This image shows the front panel of the PAXD0000 meter, featuring a red digital display showing '67.4 %' and five control buttons labeled DSP, PAR, F1, F2, and RST.
Komponenter på frontpanelet:
- Digital skærm: High-visibility red LED display for showing measured values and menu parameters.
- DSP knap: Used for display functions and navigating through display modes.
- PAR Button: Used for accessing and setting parameter configurations.
- F1-knap: Function button 1, typically for specific user-defined actions or menu navigation.
- F2-knap: Function button 2, typically for specific user-defined actions or menu navigation.
- RST-knap: Reset button, used for resetting values or confirming selections.
4. Opsætning
4.1. Installation
The PAXD0000 is designed for panel mounting. Ensure adequate space for ventilation and wiring connections.
- Cut a panel cutout of the specified dimensions (refer to the product datasheet for exact measurements).
- Insert the meter into the cutout from the front.
- Fastgør måleren med de medfølgende monteringsclips på bagsiden af panelet.
4.2. Ledninger
Refer to the wiring diagram provided with your device for specific terminal connections. Ensure all connections are secure and correctly polarized.
- Strømforsyning: Connect the appropriate DC power supply to the designated power terminals. Verify voltage kompatibilitet.
- Input signal: Connect the DC input signal to the input terminals. Observe polarity for accurate readings.
- Output Connections (if applicable): If your model includes output options (e.g., relays, analog output), connect them according to your system requirements.
4.3. Tænder
Once all wiring is complete and verified, apply power to the device. The display should illuminate, and the meter will perform a self-test before showing the measured value.
5. Betjeningsvejledning
5.1. Basic Measurement Display
Upon power-up, the meter will typically display the primary measured DC input value. Use the DSP button to cycle through various display modes, such as minimum, maximum, or other configured values.
5.2. Parameterkonfiguration
To access and modify device parameters:
- Tryk på PAR button to enter the parameter menu.
- Brug F1 og F2 buttons to navigate through the parameters.
- Trykke RST for at vælge en parameter til redigering.
- Bruge F1 og F2 for at ændre parameterværdien.
- Trykke RST again to confirm the new value and save it.
- Trykke PAR for at afslutte parametermenuen.
Common parameters include input scaling, decimal point position, and alarm setpoints. Refer to the detailed programming guide for a complete list of parameters and their functions.
6. Vedligeholdelse
6.1. Rensning
Rengør frontpanelet med en blød, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the display or housing.
6.2. Kalibrering
The PAXD0000 is factory calibrated. If recalibration is required, refer to the advanced programming manual or contact Red Lion technical support. Recalibration should only be performed by trained personnel using certified equipment.
7. Fejlfinding
Dette afsnit indeholder løsninger på almindelige problemer. Kontakt teknisk support, hvis du har problemer, der ikke er nævnt her.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom | No power, incorrect wiring, or power supply failure. | Kontroller strømtilslutninger og forsyningsvolumentage. Verify wiring against the diagram. |
| Forkerte aflæsninger | Incorrect input wiring, scaling errors, or sensor issue. | Verify input wiring polarity. Check parameter settings for scaling. Test input signal with a known source. |
| Knapperne reagerer ikke | Midlertidig softwarefejl eller fysisk skade. | Cycle power to the device. If problem persists, contact support. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Model | PAXD0000 |
| Mærke | Rød Løve |
| Fabrikant | Red Lion Controls |
| Input type | Universal DC Input |
| ASIN | B07CZLSTMV |
| UPC | 747356317894 |
| Dato først tilgængelig | 10. maj 2018 |
For complete technical specifications, refer to the official product datasheet available on the Red Lion webwebsted.
9. Garantioplysninger
Red Lion Controls products are typically covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official Red Lion Controls warranty statement available on their website or contact your local distributor for detailed information.
Gem din købsbevis til garantikrav.
10. Support
For technical assistance, troubleshooting, or further information regarding the PAXD0000 Universal DC Input Meter, please contact Red Lion Controls technical support.
You can also visit the official Red Lion website for product documentation, FAQs, and contact details. For general inquiries or to explore other products, visit the Red Lion Store on Amazon.
