1. Introduktion
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TEXAS XC 160-108H Ride-On Mower. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
Figur 1.1: Overview of the TEXAS XC 160-108H Ride-On Mower. This image shows the complete ride-on mower from a front-left angle, highlighting its compact design, large wheels, and the cutting deck.
2. Sikkerhedsinstruktioner
Always prioritize safety when operating the ride-on mower. Failure to follow these instructions can result in serious injury or death.
- Læs og forstå alle instruktioner, før du betjener maskinen.
- Hold børn og kæledyr væk fra operationsområdet.
- Bær passende personlige værnemidler (PPE), herunder øjenbeskyttelse, høreværn og robust fodtøj.
- Brug aldrig plæneklipperen under påvirkning af alkohol eller narkotika.
- Undersøg området for snavs inden græsslåning.
- Må ikke køres på for stejle skråninger.
- Sluk motoren og fjern nøglen, før du udfører vedligeholdelse eller fjerner blokeringer.
3. Opsætning og montering
Your TEXAS XC 160-108H Ride-On Mower may require some assembly upon delivery. Follow these steps carefully.
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Kontroller for eventuelle transportskader.
- Steering Wheel Installation: Attach the steering wheel to the steering column, ensuring it is securely fastened.
- Sædeinstallation: Mount the operator's seat onto the designated frame, securing it with the provided hardware.
- Batteriforbindelse: Connect the battery terminals, ensuring correct polarity (red to positive, black to negative).
- Væskekontrol: Before first use, check engine oil level and fuel level. Refer to the "Specifications" section for recommended fluid types and capacities.
Figur 3.1: Top-down view of the operator's station, showing the steering wheel, seat, and control levers. This image helps in identifying key controls during setup and operation.
4. Betjeningsvejledning
Gør dig bekendt med betjeningselementerne og betjeningsprocedurerne, før du starter motoren.
4.1. Tjekliste før drift
- Kontroller motoroliestanden.
- Ensure fuel tank is adequately filled with gasoline.
- Inspect tires for proper inflation.
- Verify cutting deck is clear of debris.
- Adjust seat for comfortable operation.
4.2. Start af motoren
- Sørg for, at parkeringsbremsen er aktiveret.
- Place the cutting deck engagement lever in the "disengaged" position.
- Sæt nøglen i tændingslåsen.
- Turn the key to the "START" position. The 12V electric start system will engage the engine.
- Når motoren starter, slip nøglen.
4.3. Græsslåning
- Klippehøjdejustering: Use the 7-fold central adjustment lever to set the desired cutting height between 30 mm and 90 mm.
- Hastighedskontrol: The hydrostatic transmission allows for stepless speed adjustment from 0 to 8.8 km/h using the foot pedal.
- Sideudflåd: The mower features a side discharge chute for efficient grass dispersal. Ensure the chute is clear during operation.
Figure 4.1: Detail of the side discharge chute. This component directs cut grass away from the mower, preventing clumping and ensuring a clean cut.
5. Vedligeholdelse
Regular maintenance is crucial for the longevity and optimal performance of your ride-on mower.
5.1. Motorvedligeholdelse
- Olieskift: Change engine oil (SAE 30) after the first 5 hours of operation, then every 25 hours or annually.
- Luftfilter: Rengør eller udskift luftfilteret regelmæssigt, især i støvede forhold.
- Tændrør: Inspicer og rengør tændrøret årligt. Udskift det, hvis det er slidt.
5.2. Klippedæk og knive
- Slibning/udskiftning af klinge: Sharpen or replace blades as needed to ensure a clean cut. Always wear gloves when handling blades.
- Rengøring af terrasse: Clean the underside of the cutting deck after each use to prevent grass buildup.
5.3. Generel vedligeholdelse
- Dæktryk: Tjek dæktrykket regelmæssigt.
- Smøring: Lubricate all moving parts as indicated in the service diagram (not provided, but a general instruction).
- Opbevaring: Store the mower in a dry, protected area when not in use.
6. Fejlfinding
Dette afsnit indeholder løsninger på almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren starter ikke | Intet brændstof; Fuldt batteri; Problem med tændrøret; Sikkerhedsafbryder aktiveret | Add fuel; Charge/replace battery; Check/replace spark plug; Ensure parking brake is on and deck is disengaged |
| Dårlig skæreydelse | Dull blades; Deck clogged; Incorrect cutting height | Sharpen/replace blades; Clean deck; Adjust cutting height |
| Plæneklipperen vibrerer meget | Bent blade; Loose components | Inspicer/udskift blad; Spænd alle fastgørelseselementer |
7. Specifikationer
Detailed technical specifications for the TEXAS XC 160-108H Ride-On Mower.
| Feature | Specifikation |
|---|---|
| Model | XC 160-108H (90063131) |
| Motortype | Loncin 4-Stroke |
| Forskydning | 452 cm³ |
| Strømudgang | 9.2 kW / 12.5 PS |
| Brændstoftype | Benzin |
| Brændstoftankvolumen | 7.5 liter |
| Motorolietype | SAE 30 |
| Motorolievolumen | 1.2 liter |
| Skærebredde | 108 cm |
| Justering af klippehøjde | 7-fold, 30 - 90 mm |
| Starter | 12V Electric Start |
| Smitte | Hydrostatic (American Hydro-Gear) |
| Hastighedsområde | 0-8.8 km/t |
| Drejecirkel | 45 cm |
| Tire Size (Front/Rear) | Front: 15", Rear: 18" (Pneumatic) |
| Materiale til hus | Stål |
| Lydeffektniveau | 100 dB(A) |
| Dimensioner (L x B x H) | 173 cm x 132 cm x 105 cm |
| Vægt | 170 kg |
8. Garanti og support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Texas customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
For further assistance, visit the official Texas webwebstedet eller kontakt deres autoriserede servicecentre.
