Compustar 2-Way 4-Button FM Replacement Remote Transmitter Control 2WT9R-FM Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the Compustar 2WT9R-FM 2-Way 4-Button FM Replacement Remote Transmitter Control. This remote is designed to function with the Compustar RF-2WT9-FM system. It is crucial to verify compatibility with your existing system before attempting installation or use.

Oplysninger om kompatibilitet:

• Designed for RF-2WT9-FM systems.
• Compatible Antenna Number: ANT-2WFMX.
• FCC ID: VA5RCD310-2WFX
• IC ID: 7087A-2WRCD310FX

2. Produktet er slutview

The Compustar 2WT9R-FM remote offers advanced control and feedback for your vehicle's remote start and security system. Its 2-way communication provides confirmation of commands and vehicle status directly on its LCD screen.

2.1 Nøglefunktioner

• 2-vejs kommunikation: Receive visual and audible confirmations from your vehicle.
• 4-knapsdesign: Intuitiv styring af forskellige funktioner.
• FM Technology: Enhanced range and signal reliability.
• LCD-skærm: Provides real-time vehicle status updates (e.g., lock status, engine status, battery level).
• Udvidet rækkevidde: Estimated operational range of up to 3000 feet.
• Strømkilde: Uses one AAA battery.

2.2 Fjernbetjeningsdiagram

The image above displays the Compustar 2WT9R-FM remote control. The LCD screen shows icons for signal strength, lock status, engine status, and battery level. The side of the remote features four distinct buttons for various functions.

3. System Programming and Setup

This section outlines the process for flashing and updating your Compustar Blade module and controller, which is essential for the remote control to function correctly with your vehicle's system. This procedure requires a computer and specific hardware.

3.1 Nødvendige varer

• Computer (with Internet Explorer browser recommended)
• ADS-USB cable
• Compustar-controller (f.eks. CM7200)
• Blade AL/TB Module

3.2 Programming Procedure

1. Opret konto: Before starting, create an account on compustar.idatalink.com. It is recommended to use Internet Explorer and allow ActiveX if prompted.
2. Dock Blade Module: Carefully dock your Blade module into your Compustar Controller.
3. Connect ADS-USB: Sæt ADS-USB-kablet i en ledig USB-port på din computer.
4. Tilslut controller: Use the cable labeled "iDataLink module" to connect the ADS-USB to the black RS-232 data port on the Compustar Controller.
5. Adgang WebForbindelse: Start Internet Explorer og naviger til compustar.idatalink.com.
6. Flash Your Module: Click on the "Flash Your Module" option. The system will detect the connected hardware.
7. Vælg køretøj: On the programming home screen, select the correct year, make, and model of your vehicle.
8. Configure and Flash: You can either configure specific features for the Blade module or select "Flash" to load the default settings. The site will provide the appropriate installation guide for download.
9. Flash Remote Starter: While the controller is still connected, select the "Remote Starter" tab. Here, you can configure additional features such as remote start run time, programmable outputs, and double pulse unlock. Save your changes. This tab also allows you to update the firmware for the controller when available.

3.3 System Programming Demonstration Video

3.4 Fjernparring

After the system controller and module are properly flashed and installed in your vehicle, your 2WT9R-FM remote control will need to be paired or programmed to communicate with the system. Refer to your specific Compustar system's installation guide or consult a professional installer for detailed remote pairing instructions, as this process can vary.

4. Betjening

The 2WT9R-FM remote control features four primary buttons, typically located on the side, and an LCD screen for visual feedback. While specific button assignments may vary based on system configuration, common functions include:

• Låse: Press to lock your vehicle's doors. The LCD will display a lock icon and provide confirmation.
• Lås op: Press to unlock your vehicle's doors. The LCD will display an unlock icon and provide confirmation.
• Fjernstart: Press and hold (or press in sequence) to remotely start your vehicle's engine. The LCD will show an engine icon and countdown timer, confirming the start.
• Trunk Release / Auxiliary: Press to open the trunk or activate an auxiliary function (e.g., power sliding doors, heated seats).

The 2-way communication feature ensures that you receive visual and audible feedback on the remote's LCD screen, confirming that your commands have been executed by the vehicle.

5. Vedligeholdelse

5.1 Udskiftning af batteri

The Compustar 2WT9R-FM remote control is powered by one AAA battery. When the battery level is low, an indicator will typically appear on the LCD screen. To replace the battery:

1. Find batteridækslet på bagsiden af ​​fjernbetjeningen.
2. Carefully open the compartment using a small tool if necessary.
3. Fjern det gamle AAA-batteri.
4. Isæt et nyt AAA-batteri, og sørg for at polariteten (+/-) vender korrekt.
5. Luk batterirummets dæksel forsvarligt.

Bortskaf gamle batterier i henhold til lokale regler.

6. Fejlfinding

If you encounter issues with your Compustar 2WT9R-FM remote control, consider the following common troubleshooting steps:

• No Response from Vehicle:
  • Check the remote's battery level and replace if necessary.
  • Ensure you are within the estimated 3000 ft. operating range.
  • Verify that the remote is properly paired with your Compustar system (refer to Section 3.4).
  • Check for strong radio interference in your current location.
• Problemer med LCD-skærm:
  • If the display is dim or unresponsive, replace the AAA battery.
  • If icons are incorrect, re-pair the remote with the system.
• Kompatibilitetsproblemer:
  • Confirm that your remote is the correct model (2WT9R-FM) for your Compustar RF-2WT9-FM system and ANT-2WFMX antenna. Incompatibility can lead to non-functionality.
• System Programming Errors:
  • If you suspect issues with the Blade module or controller firmware, re-perform the system programming steps outlined in Section 3.2.

For persistent issues or complex problems, it is recommended to contact Compustar technical support or an authorized installer.

7. Specifikationer

8. Garanti og support

For information regarding product warranty, technical support, or to locate an authorized Compustar dealer, please visit the official Compustar webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Officiel Webwebsted: www.compustar.com

Teknisk support: Refer to the contact information provided on the Compustar webwebstedet eller din produktemballage.