Brugermanual til Clear-Com BS410 basestation

1. Introduktion og overview

The Clear-Com BS410 is a robust base station designed for professional wireless communication systems. It serves as the central hub for the DX410 wireless system, facilitating seamless communication for up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Operating within the 2.4GHz frequency band, the BS410 delivers high-quality 7kHz wideband audio, ensuring clear and reliable voice transmission. A key feature of this base station is its audio bridging capability, allowing for the integration of both 2-wire and 4-wire audio signals on its A or B channels, providing versatile connectivity options for various production environments.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt, før du betjener enheden.
• Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
• Sørg for korrekt ventilation for at forhindre overophedning. Bloker ikke ventilationsåbninger.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Overlad al service til kvalificeret servicepersonale. Forsøg ikke selv at servicere dette produkt.
• Afbryd strømmen under tordenvejr eller når den ikke bruges i længere perioder.

3. Produktfunktioner

• Supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets.
• Operates in the 2.4GHz frequency band (2400 – 2483.5 MHz).
• Provides high-quality 7kHz wideband audio for clear communication.
• Features audio bridging capability for combining 2-wire and 4-wire audio.
• Designed for professional communication applications.
• Wireless connectivity for flexible deployment.
• Rack-mountable design for integration into existing setups.

4. Opsætning

Before operating your Clear-Com BS410 Base Station, follow these steps for proper setup:

4.1 Frontpanel overview

4.2 Antenneforbindelse

Locate the antenna connectors on the rear panel of the BS410. Carefully screw the provided antennas onto these connectors. Ensure they are finger-tight to establish a secure connection for optimal wireless performance.

4.3 Strømtilslutning

Connect the supplied power cable to the power input on the rear of the BS410 and then to a suitable AC power outlet. Ensure the power switch on the front panel is in the OFF position before connecting power.

4.4 Audio Connections (2-Wire / 4-Wire)

The BS410 supports both 2-wire and 4-wire audio connections. Connect your external audio equipment (e.g., intercom systems, audio mixers) to the appropriate input/output ports on the rear panel. Refer to the auxiliary section on the front panel for input/output selection and level adjustments.

4.5 Registering Beltpacks/Headsets

To enable communication, BP410 beltpacks and WH410 headsets must be registered with the BS410 base station. Follow the specific registration procedure outlined in the separate beltpack/headset manuals. The front panel 'REG' button and 'STATUS' display on the BS410 will assist in this process.

5. Betjeningsvejledning

5.1 Tænd/sluk

Tryk på MAGT switch on the front panel to turn the unit ON. The STATUS display will illuminate. To power off, press the MAGT skifte igen.

5.2 Betjeningselementer på frontpanelet

• CLR/BND: Clear/Bind button for managing registered devices.
• STATUS: Digital display indicating system status or registration progress.
• REG: Button used for initiating the registration process for new devices.
• UNLATCH: Button to unlatch the talk function.
• RECEIVE A/B: Indicators for active receive channels.
• AUXILIARY Section: Contains controls for 2-wire and 4-wire input/output levels, input assignment (A/B), and auto nulling for audio bridging.
• HEADSET Controls: Inkluderer BIND knob for headset audio, MIC NIVEAU knob for microphone input sensitivity, SEL (Select) button, and TALE button for activating the headset microphone.

5.3 Establishing Communication

Once beltpacks/headsets are registered and powered on, they will automatically connect to the base station. Use the TALE button on the headset or beltpack to initiate communication. Adjust the BIND og MIC NIVEAU knobs on the front panel for optimal audio levels.

5.4 Audio Bridging

The auxiliary section allows you to bridge 2-wire and 4-wire audio. Use the VÆLGE buttons and input/output level controls to configure the audio routing and ensure proper signal levels between connected systems.

6. Vedligeholdelse

6.1 Rengøring

To clean the unit, use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components. Ensure the unit is powered off and disconnected from the power source before cleaning.

6.2 firmwareopdateringer

Periodically check the Clear-Com webwebsted for tilgængelige firmwareopdateringer. Firmwareopdateringer kan forbedre ydeevnen, tilføje nye funktioner eller løse kendte problemer. Følg vejledningen, der følger med firmwareopdateringspakken, omhyggeligt.

6.3 Opbevaring

If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the unit in its original packaging or a protective case.

7. Fejlfinding

7.1 Ingen strøm

• Sørg for, at strømkablet er korrekt tilsluttet til både enheden og stikkontakten.
• Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
• Check the power switch on the front panel is in the ON position.

7.2 Ingen lyd / Dårlig lydkvalitet

• Check all audio cable connections (2-wire, 4-wire, headset).
• Juster BIND og MIC NIVEAU knapperne på frontpanelet.
• Ensure beltpacks/headsets are properly registered and within range.
• Verify the correct input/output selections in the auxiliary section.
• Perform an auto-null procedure if using 2-wire connections to eliminate feedback.

7.3 Beltpack/Headset Not Registering

• Ensure the beltpack/headset is powered on and in registration mode.
• Tryk på REG button on the BS410 front panel.
• Confirm the beltpack/headset is compatible with the BS410.
• Try moving the beltpack/headset closer to the base station during registration.

8. Specifikationer

9. Garanti og support

Clear-Com products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, coverage, and duration, please refer to the warranty card included with your product or visit the official Clear-Com webwebsted.

For technical support, troubleshooting assistance, or service inquiries, please contact Clear-Com customer support. Contact information can typically be found on the Clear-Com webwebstedet eller i din produktdokumentation.