1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Came Selt1Ndg Outdoor Keypad, model CMC806SL-0150. Please read this manual carefully before use to ensure proper functionality and safety.
The Came Selt1Ndg is a high-quality outdoor keypad designed for access control systems. It features a backlit keypad for enhanced visibility.
2. Sikkerhedsoplysninger
Always follow basic safety precautions to reduce the risk of injury, electric shock, or damage to the product.
- Installation skal udføres af kvalificeret personale.
- Afbryd strømmen, før du udfører vedligeholdelses- eller installationsprocedurer.
- Do not expose the keypad to excessive moisture or extreme temperatures beyond its specified operating range.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Came Selt1Ndg Outdoor Keypad (1 unit)
- Monteringsskruer og ankre
- Instruktionsmanual (dette dokument)
4. Opsætning og installation
4.1 Montering af tastaturet
The keypad is designed for outdoor use. Choose a suitable location that is easily accessible and provides adequate protection from direct impact.
- Mark the desired mounting position on the wall or surface.
- Bor pilothuller til monteringsskruerne.
- Secure the keypad base to the surface using the provided screws and anchors.
- Ensure the keypad is firmly attached and level.
Figur 1: Forside view of the Came Selt1Ndg Outdoor Keypad. The keypad features a black casing with a backlit numeric pad (0-9, *, #) for code entry. The "CAME" logo is visible at the top.
4.2 Ledningsforbindelser
Refer to the wiring diagram provided with your specific access control unit for detailed connection instructions. The Selt1Ndg keypad typically connects to a control board (e.g., Came S0002 or R800 V2) using a multi-core cable.
- Strømforsyning: Connect the keypad to the appropriate power terminals on the control board.
- Data Lines: Connect the data output lines from the keypad to the corresponding input terminals on the control board.
- Backlight (Optional): If using a single keypad, the backlight functions automatically. For multiple keypads, a dedicated decoder board (e.g., R800 V2) may be required for backlight functionality.
- Jord: Ensure a proper ground connection.
Note: Incorrect wiring can damage the keypad or the control unit. Consult a professional if you are unsure about the wiring process.
5. Betjeningsvejledning
5.1 Programming Access Codes
Programming of access codes is typically done via the connected control board, not directly on the keypad. Refer to your control board's manual for specific programming procedures. The keypad acts as an input device for these codes.
General Steps (may vary by control board):
- Access the programming mode on your control board.
- Enter the master code or administrator password.
- Follow the prompts to add new user codes.
- Enter the desired access code on the Selt1Ndg keypad when prompted by the control board.
- Confirm the code and exit programming mode.
5.2 Entering an Access Code
To gain access, enter your pre-programmed code followed by the '#' key (or 'E' on older systems, depending on control board configuration).
- The keypad backlight will illuminate when a key is pressed.
- Enter your numeric access code.
- Tryk på # tasten for at bekræfte indtastningen.
- If the code is valid, the connected access control system will activate (e.g., open a gate or door).
6. Vedligeholdelse
The Came Selt1Ndg keypad requires minimal maintenance to ensure long-term performance.
- Rensning: Periodically wipe the keypad surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Regularly inspect the keypad for any signs of physical damage, loose connections, or wear.
- Miljøbeskyttelse: While designed for outdoor use, avoid prolonged exposure to extreme weather conditions if possible.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Tastaturet reagerer ikke | No power; Loose connection; Faulty wiring. | Check power supply to the control board. Verify all wiring connections are secure. Consult wiring diagram. |
| Baggrundslys virker ikke | No power to backlight circuit; Multiple keypads without decoder. | Ensure power supply is adequate. If using multiple keypads, check if a decoder board (e.g., R800 V2) is required and correctly installed. |
| Access code not working | Incorrect code entered; Code not programmed; Control board issue. | Re-enter the code carefully. Verify the code is correctly programmed in the control board. Check the control board's status. |
| Keypad buttons are stiff or unresponsive | Dirt or debris under buttons; Physical damage. | Clean the keypad surface. If damage is present, contact support for repair or replacement. |
If troubleshooting steps do not resolve the issue, contact Came technical support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Kom |
| Modelnummer | CMC806SL-0150 |
| Forbindelsesteknologi | USB (Note: This specification from the source data may refer to an internal programming or diagnostic port, as operational keypads typically use wired connections to control units.) |
| Farve | Sort |
| Tastaturbaggrundsbelysning | Single color backlight |
| Vandmodstandsniveau | Ikke vandtæt |
| Fabrikant | Came S.P.A. |
| Oprindelse | Fremstillet i Italien |
Note on Water Resistance: While designed for outdoor installation, the keypad is specified as "Not waterproof." This indicates resistance to splashes and typical weather conditions, but it should not be submerged or exposed to high-pressure water jets. Proper installation and sealing are crucial for longevity in outdoor environments.
9. Garantioplysninger
Came products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Came webwebsted. Gem din købsbevis til garantikrav.
10. Teknisk support
For technical assistance, spare parts, or further information, please contact your local Came distributor or visit the official Came webwebsted:
- Webwebsted: www.came.com
- Kontakte: Refer to the "Contact Us" section on the webwebsted for regionale supportoplysninger.
