APC SMT1500RMI2UC Line-Interactive 1500VA UPS brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your APC SMT1500RMI2UC Line-Interactive 1500VA Uninterruptible Power Supply (UPS). The UPS is designed to protect your electronic equipment from power outages, surges, and sags, ensuring continuous power and data integrity. Please read this manual thoroughly before installation and use.

2. Sikkerhedsoplysninger

WARNING: Risk of Electric Shock or Explosion

• This UPS contains internal batteries that may present a shock hazard even when disconnected from the utility power.
• Service af batterier bør udføres eller overvåges af personale, der har viden om batterier og de nødvendige forholdsregler.
• Smid ikke batterier i ild. Batterier kan eksplodere.
• Batterier må ikke åbnes eller ødelægges. Frigivet elektrolyt er skadelig for hud og øjne. Det kan være giftigt.
• Ensure proper grounding of the UPS and connected equipment.
• Do not operate the UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

3. Produktet er slutview

3.1 Frontpanel

Figur 3.1: Forside view of the APC SMT1500RMI2UC UPS, showing the LCD display and control buttons.

The front panel features an intuitive LCD display and control buttons for monitoring UPS status, configuring settings, and performing self-tests. The display provides real-time information on load, battery charge, and operational status.

Figure 3.2: Close-up of the UPS LCD display, indicating 0% load and 100% battery charge.

3.2 Bagpanel

Figur 3.3: Bagside view of the UPS, highlighting the input power connector, six IEC-C13 output outlets, communication ports, and battery connector.

The rear panel includes the main power input, six IEC-C13 output outlets for connecting protected equipment, and various communication ports. An overload protector button is also present for resetting in case of an electrical overload.

Figur 3.4: Detaljeret view of the USB, Serial, and Network (SmartConnect) communication ports.

3.3 SmartConnect Feature

The APC SMT1500RMI2UC features SmartConnect, allowing for cloud-based remote monitoring and management of your UPS. This enables you to receive alerts, monitor status, and perform basic management tasks from any web-aktiveret enhed.

Figure 3.5: The APC SmartConnect dashboard accessible across various devices for remote monitoring.

4. Opsætning

4.1 Udpakning og inspektion

Carefully unpack the UPS and inspect it for any shipping damage. Report any damage to the carrier and your dealer. Retain the packing materials for future use.

4.2 Batteritilslutning

The UPS is shipped with the internal battery disconnected for safety. Before initial use, connect the battery according to the instructions provided in the quick start guide or on the unit itself. This typically involves pulling out the battery tray, rotating the battery, and pushing it back in until it clicks into place.

4.3 Placering og montering

The SMT1500RMI2UC is designed for rack-mount installation. Ensure adequate ventilation around the unit. Avoid placing the UPS near heat sources or in areas with excessive dust or moisture.

Figure 4.1: The UPS securely installed within a standard server rack.

4.4 Tilslutning af udstyr

1. Connect the UPS to a properly grounded utility power outlet using the provided power cord.
2. Connect your critical equipment (servers, network devices, etc.) to the IEC-C13 output outlets on the rear of the UPS. Ensure the total load does not exceed the UPS's capacity.
3. For remote monitoring, connect an Ethernet cable from your network to the SmartConnect network port on the rear panel.

4.5 Indledende opstart

Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the UPS to charge for at least 24 hours before relying on its full battery runtime capacity.

5. Betjening

5.1 Tænd/sluk

• For at tænde: Tryk på tænd/sluk-knappen, og hold den nede, indtil displayet lyser.
• For at slukke: Tryk på tænd/sluk-knappen, og hold den nede, indtil skærmen slukker.

5.2 LCD-skærm og navigation

The LCD display provides real-time status information. Use the navigation buttons (up, down, enter, escape) to browse through menus, view detaljerede oplysninger og juster indstillinger såsom udgangsvolumentage, alarmtærskler og selvtestplaner.

5.3 Automatisk Voltage Forordning (AVR)

UPS'en har automatisk spændingtage Regulation (AVR) to correct minor voltage fluctuations without switching to battery power. This extends battery life and ensures a stable power supply to connected equipment.

5.4 Green Mode

The Green Mode feature optimizes UPS efficiency by bypassing the AVR when utility power is stable, reducing energy consumption and heat generation. The UPS automatically switches to AVR or battery mode when power conditions require it.

5.5 SmartConnect Monitoring

Once connected to your network, register your UPS with the APC SmartConnect portal. This allows you to monitor the UPS status, receive email alerts for critical events, and perform remote diagnostics via a secure web brugerflade eller mobilapplikation.

6. Vedligeholdelse

6.1 Batteripleje og udskiftning

The internal battery has a typical lifespan of 3-5 years. Regular self-tests help monitor battery health. When the battery needs replacement, the UPS will indicate this on the LCD and via SmartConnect. Replace batteries with APC-approved replacement battery cartridges (RBCs) to ensure optimal performance and safety.

6.2 firmwareopdateringer

Periodically check for firmware updates through the SmartConnect portal or APC's website. Firmware updates can provide performance enhancements, bug fixes, and new features. Follow the provided instructions carefully when performing updates.

6.3 Rengøring

Keep the UPS free from dust and debris. Use a dry cloth to clean the exterior. Do not use liquid cleaners or solvents.

7. Fejlfinding

If you encounter issues with your UPS, refer to the following common problems and solutions:

For more detailed troubleshooting, consult the full product documentation available on the APC website or through the SmartConnect portal.

8. Specifikationer

Key technical specifications for the APC SMT1500RMI2UC UPS:

• Model: SMT1500RMI2UC
• Kapacitet: 1500VA / 1000W
• Input bindtage: 230 volt
• Udgange: 6 x IEC-C13
• Dimensioner (H x B x D): 3.39 x 17.01 x 18.78 tommer (8.6 x 43.2 x 47.7 cm)
• Varens vægt: 57.2 pund (26 kilo)
• Batteritype: 1 x A battery (included)
• Kommunikationsporte: USB, Serial, Network (SmartConnect)
• Farve: Sort
• Dato først tilgængelig: 3. april 2018

Figure 8.1: Runtime graph illustrating the estimated battery backup time based on connected load for the SMT1500RMI2UC model.

9. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle APC by Schneider Electric website or contact their customer service. Keep your purchase receipt and product serial number handy when contacting support.

You can find additional resources and support through the APC by Schneider Electric-butikken på Amazon.