Zippo Lighter Model 79578 Instruction Manual

Indledning

This manual provides essential instructions for the safe and effective use, maintenance, and care of your Zippo windproof lighter, Model 79578. Please read thoroughly before first use to ensure proper operation and longevity of your product.

Sikkerhedsoplysninger

• Opbevares utilgængeligt for børn. Lighters are not toys.
• Tænd lighteren væk fra ansigt og tøj. Always ensure a safe distance.
• Contains flammable liquid. Handle with care and store away from heat sources.
• Må ikke udsættes for varme over 49 °C eller langvarig sollys. This can cause pressure buildup and potential hazard.
• Never puncture or incinerate. Dispose of properly when no longer usable.
• Ensure flame is extinguished after each use. Close the lid completely to cut off oxygen.

Setup: Initial Fueling

Your Zippo lighter is shipped without fuel for safety. It must be filled with Zippo premium lighter fluid before first use.

1. Fjern indsatsen: Open the lighter lid. Grasp the top of the insert (the metal unit inside the case) and pull it out.
2. Lift the Felt Pad: Turn the insert upside down. Lift the felt pad at the bottom to expose the packing material.
3. Fyld med væske: Slowly saturate the packing material with Zippo premium lighter fluid. Stop filling when the fluid reaches the top of the packing, or when the color of the packing changes. Do not overfill.
4. Replace Felt Pad: Lower the felt pad securely.
5. Genindsæt: Slide the insert back into the case, ensuring it is fully seated.
6. Ryd op: Tør overskydende væske af lighteren og dine hænder, inden du tænder den.

This image shows the Zippo Lighter Model 79578 with its distinctive Black Matte Wolf Face design. The lighter is closed, showcasing its exterior.

Operating Your Zippo Lighter

1. Åbn låget: Flip open the lighter's lid.
2. Strike the Wheel: Hold the lighter firmly. With your thumb, strike the flint wheel downwards against the flint to create a spark.
3. Antænde: The spark will ignite the fuel-soaked wick, producing a flame.
4. Sluk: For at slukke flammen skal du blot lukke låget. Låget vil afbryde ilttilførslen og dermed slukke flammen.

Note: The Zippo windproof design allows the flame to remain lit in windy conditions, making it reliable in various environments.

Opretholdelse

Tankning

Refuel your lighter as described in the "Setup: Initial Fueling" section when the flame becomes weak or fails to ignite. For optimal performance, use only Zippo premium lighter fluid.

Udskiftning af flintstenen

1. Remove Insert: Træk indsatsen ud af etuiet.
2. Unscrew Flint Spring: Turn the insert upside down. Unscrew the brass flint spring screw at the bottom using a small screwdriver or the edge of the lighter lid.
3. Remove Old Flint: Carefully remove the old flint and the flint spring.
4. Insert New Flint: Indsæt en ny Zippo-flintesten i flintestensrøret.
5. Replace Flint Spring: Reinsert the flint spring, ensuring the brass tip is facing the flint. Screw the flint spring screw back in tightly.
6. Genindsæt: Place the insert back into the lighter case.

This image shows the internal components of a Zippo lighter, including the insert, wick, and flint wheel mechanism, illustrating how it functions.

Udskiftning af vægen

1. Remove Insert: Træk indsatsen ud af etuiet.
2. Remove Flint and Felt Pad: Remove the flint spring, flint, and felt pad as described in the "Replacing the Flint" section.
3. Pull Wick: Using tweezers or small pliers, pull the old wick through the chimney from the top until it is fully removed.
4. Insert New Wick: Thread a new Zippo wick through the chimney hole from the top.
5. Weave Wick: Using tweezers, weave the wick back and forth between the packing material inside the insert. This ensures maximum fuel absorption.
6. Trim Wick: Trim vægen, så den er i niveau med toppen af ​​skorstenen.
7. Saml igen: Replace the felt pad, flint, and flint spring. Reinsert the unit into the case.

This image displays a Zippo lighter with its lid open, revealing the wick and chimney, ready for use or maintenance.

Fejlfinding

Specifikationer

• Model: 79578
• Design: Black Matte Wolf Face
• Materiale: Metal
• Dimensioner (L x B x H): 1.44 cm x 0.5 cm x 2.25 cm
• Brændstoftype: Zippo premium lighter fluid (sold separately)
• UPC: 191693059755
• Fabrikant: Zippo

Garantioplysninger

Your Zippo lighter is backed by the world-famous Zippo Lifetime Guarantee: "It works or we fix it free." Any Zippo lighter, when returned to the factory, will be put in first-class mechanical condition free of charge, regardless of age or condition. The finish, however, is not guaranteed.

This guarantee provides specific legal rights, and you may also have other rights which vary by state.

This image displays the Zippo Lifetime Guarantee certificate, detailing the terms of the warranty.

Support og kontakt

For further assistance, parts, or to send your lighter for repair under warranty, please visit the official Zippo website or contact Zippo customer service directly.

Zippo Manufacturing Company
33 Barbour Street
Bradford, PA 16701 USA

For mere information, besøg: www.zippo.com