1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Good Earth Lighting Three-Head LED Security Flood Light, Model SE1163-WH3-00LF0-G. This fixture is designed to provide bright, energy-efficient illumination for outdoor areas such as backyards, driveways, and building perimeters. Please read these instructions thoroughly before installation and retain them for future reference.
2. Sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Grounding is required for safe operation.
- Do not handle live wires with wet hands.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- This fixture is rated for 120V AC power supply.
- Do not attempt to disassemble or modify the integrated LED components. There are no user-serviceable parts inside.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Three-Head LED Security Flood Light Fixture
- Universal monteringsplade
- Monteringsudstyr (skruer, trådmøtrikker)
- Instruktionsmanual
4. Installationsvejledning
4.1 Forinstallation
- Sluk for strømmen: Locate the circuit breaker or fuse box controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage tester.
- Forbered monteringsfladen: This fixture is designed for direct wire installation and can be mounted on a wall, eave, or surface box. Ensure the mounting surface is structurally sound and can support the fixture's weight.
4.2 Montering af armaturet
- Attach the universal mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
- Feed the electrical wires from the junction box through the center hole of the mounting plate and into the fixture's wiring compartment.
Figur 1: Forside view of the Good Earth Lighting Three-Head LED Security Flood Light.
4.3 Ledningsforbindelser
- Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
- Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
- Tilslut grøn eller bar kobberledning (jordledning) fra armaturet til grøn or bare copper (ground) wire from the junction box using a wire nut.
- Carefully tuck all wires into the junction box and align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws.
4.4 Justering af lyshoveder
The three LED light heads feature swivel joints, allowing for independent adjustment. Loosen the adjustment screws on each head, position the light beam to the desired area, and then securely tighten the screws to lock the position.
Figure 2: Good Earth Lighting flood light installed on an exterior wall, illuminating the area.
5. Betjening
Once installed and power is restored, the Good Earth Lighting Three-Head LED Security Flood Light operates via a standard wall switch. Flip the switch to the "ON" position to activate the light and to the "OFF" position to deactivate it.
The adjustable heads allow you to direct the light precisely where needed, providing broad coverage for enhanced visibility and security.
6. Vedligeholdelse
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Brug en blød, tør klud.amp cloth to wipe down the exterior. Do not use abrasive cleaners or solvents, as these may damage the finish or polycarbonate diffuser.
- lysdioder: This fixture features integrated LED lamps with an estimated life of 50,000 hours. The LEDs are not replaceable. If the LEDs cease to function, the entire fixture should be replaced.
- Inspektion: Periodically inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly to ensure safe and proper operation.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Defekt vægafbryder. | Tjek afbryder/sikring. Kontroller, at alle ledningsforbindelser er sikre (sørg først for, at strømmen er slukket). Test eller udskift vægkontakten. |
| Lyse flimrer. | Løs ledningsforbindelse. Inkompatibel lysdæmper (denne armatur er ikke designet til dæmpning). | Check all wire connections (ensure power is off first). Ensure a standard ON/OFF switch is used. |
| Utilstrækkelig belysning. | Light heads are not aimed correctly. | Adjust the swivel joints of the light heads to direct light to the desired areas. |
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport.
8. Specifikationer
- Model: SE1163-WH3-00LF0-G
- Strømkilde: AC/DC
- Voltage: 120 volt
- Wattage: 34 watt (LED)
- Lysstyrke: 3317 lumen
- Lys farve: Day White (approx. 5164 Kelvin)
- Lyskildetype: Integreret LED
- Antal lyskilder: 3
- Lamp Liv: 50,000 timer (estimeret)
- Materiale: Die-cast Aluminum Housing, Polycarbonate Diffuser
- Slutte: Tekstureret hvid
- Dimensioner: 12.25" L x 9.00" B x 5.75" H
- Varens vægt: 2.17 lbs
- Installationstype: Direct Wire, Surface Mounted, Wall Mounted
- Indendørs/udendørs brug: Udendørs
- Særlige funktioner: Shatter Resistant Diffuser, Adjustable Heads
- Certificeringer: ETL-listet, Energy Star-certificeret
- UPC: 755284017908
9. Garanti og support
Dette Good Earth Lighting-produkt er understøttet af en 6 års begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
For warranty claims, technical assistance, or further inquiries, please contact Good Earth Lighting customer support. Refer to the product packaging or the official Good Earth Lighting webhjemmeside for aktuelle kontaktoplysninger.
Note: Gem din købskvittering som købsbevis af garantihensyn.
