1. Introduktion
This manual provides detailed instructions for the safe installation, operation, and maintenance of your SCHWAIGER LWHD5530 Flat Panel Wall Mount. Please read this manual thoroughly before installation to ensure correct usage and to prevent damage to the product or your television.
The SCHWAIGER LWHD5530 is designed to securely mount flat panel televisions to a wall, offering flexibility in viewing angles through its articulated arm and tilt functionality. It supports televisions with VESA mounting patterns up to 400x400 mm and a maximum weight of 30 kg.
2. Sikkerhedsoplysninger
- Vægt kapacitet: Do not exceed the maximum weight capacity of 30 kg (66 lbs). Exceeding this limit can result in serious injury or property damage.
- Vægtype: Ensure the mounting surface can safely support the combined weight of the mount and the television. Consult a qualified professional if unsure about your wall's structural integrity.
- Værktøjer: Use appropriate tools for installation. Always wear safety glasses.
- Forsamling: Do not attempt to assemble or install the mount if any parts are missing or damaged. Contact customer support for replacement parts.
- Børn: Keep children away from the installation area during assembly. Small parts may be a choking hazard.
- Kabler: Ensure all cables are routed safely and are not pinched or stretched, which could lead to damage or a tripping hazard.
3. Pakkens indhold
Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact SCHWAIGER customer support.
- Vægmontering
- TV Mounting Plate (VESA compatible)
- Vægmonteringsbeslag (skruer, ankre)
- TV Mounting Hardware (various screw sizes, washers, spacers)
- Instruktionsmanual
4. Opsætning og installation
Proper installation is crucial for the safety and performance of your TV mount. It is recommended that two people perform the installation.
4.1 Nødvendigt værktøj (medfølger ikke)
- Blyant
- Stolpefinder (til montering af træstolper)
- Bor med passende bor
- Niveau
- Phillips hovedskruetrækker
- Topnøgle eller justerbar nøgle
- Målebånd
4.2 Vægmontering
- Bestem monteringssted: Choose a location on your wall that is structurally sound and allows for optimal viewing. Use a stud finder to locate wood studs if mounting to wood.
- Marker borehuller: Hold the wall plate of the mount against the wall at the desired height and use a level to ensure it is straight. Mark the drill hole locations with a pencil.
- Bor pilothuller: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type (e.g., wood stud, concrete, brick). Refer to the hardware instructions for specific drill bit sizes.
- Sikker vægplade: Attach the wall plate to the wall using the provided screws and anchors (if applicable). Ensure all screws are tightened securely.

Figur 1: Overview of the SCHWAIGER LWHD5530 Wall Mount.
4.3 Attaching to Television
- Identificér VESA-mønster: Locate the mounting holes on the back of your television. Measure the horizontal and vertical distance between these holes to determine the VESA pattern (e.g., 200x200mm).
- Vælg tv-skruer: Choose the correct diameter and length of screws from the provided hardware kit that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
- Attach TV Mounting Plate: Secure the TV mounting plate to the back of your television using the selected screws. Do not overtighten.

Figur 2: Bagside view of the mount, illustrating the VESA plate attachment.
4.4 Montering af TV på vægplade
- Lift and Hook: With assistance, carefully lift the television with the attached mounting plate and hook it onto the wall-mounted arm assembly.
- Sikkert TV: Ensure the TV is securely seated on the mount. Depending on the design, there may be safety screws or locking mechanisms to prevent accidental dislodgement. Engage these mechanisms as per the specific instructions provided with your mount.
5. Betjeningsvejledning
The SCHWAIGER LWHD5530 mount offers various adjustments for optimal viewing.
5.1 Justering af hældning
The mount allows for vertical tilt adjustment. Loosen the tilt adjustment knobs or bolts on the TV mounting plate, adjust the screen to the desired angle (up to 15 degrees), and then securely tighten the knobs/bolts to fix the position.

Figure 3: Illustration of the tilt adjustment range.
5.2 Justering af drejeled og forlænger
The articulated arm allows for horizontal swivel and extension from the wall. Gently push or pull the television to achieve the desired viewing angle and distance from the wall. The mount's joints are designed to hold the position once adjusted.

Figure 4: Swivel and articulation capabilities of the mount.
5.3 Kabelstyring
Integrated cable management channels or clips are provided to route and conceal cables along the arm, maintaining a tidy appearance and preventing cable damage.

Figur 5: Eksample of cable management along the mount arm.
6. Vedligeholdelse
- Rensning: Rengør holderen med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or adjustments may cause fasteners to loosen.
- Smøring: The moving parts of the mount are designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by the manufacturer.
7. Fejlfinding
- TV'et er ikke i vater: Check the wall plate installation to ensure it is level. Adjust the TV mounting plate if it has a leveling feature.
- Difficulty adjusting the mount: Ensure no cables are obstructing movement. Check if any adjustment knobs or bolts are overtightened. For gas spring models, ensure the gas spring tension is correctly set for your TV's weight.
- Mount føles ustabil: Immediately remove the TV from the mount. Re-check all wall mounting and TV attachment screws for tightness. Verify that the wall structure is adequate for the combined weight.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | LWHD5530511 |
| Mærke | SCHWAIGER |
| Materiale | Aluminium |
| Farve | Sort |
| Maksimal tv-vægt | 30 kg (66 lbs) |
| VESA-kompatibilitet | 75x75, 100x100, 200x100, 200x200, 300x300, 400x200, 400x400 mm |
| Bevægelsestype | Tilt, Swivel, Extension |
| Maksimal hældningsvinkel | 15 grader |
| Produktdimensioner | 16.54 x 2.28 x 16.54 tommer (ca.) |
| Varens vægt | 2.64 pund (omtrentligt) |
9. Garanti og support
For warranty information and customer support, please refer to the official SCHWAIGER webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis.





