1. Produktet er slutview
The Memphis Audio SRX Pro 6.5" Speaker (Model: SRXP62-UVG) is designed to deliver impressive audio performance for car audio systems. These speakers are part of the Street Reference series, offering a balance of sound quality and value. They are engineered to provide clear mid-range and high-frequency sound, complementing existing bass systems.

Figur 1.1: Forside view of the SRX Pro 6.5" speaker, showcasing its black cone and distinctive orange phase plug.
2. Nøglefunktioner
- Ultra-light treated paper cone: Designed for high Sound Pressure Level (SPL) output.
- Cloth treated surround: Enhances high SPL performance and durability.
- Accordion design: Increases excursion and overall audio output.
- 1.5" Voice Coil (VC): Provides higher power handling capabilities.
- Center phase plug: Improves high-frequency response and sound dispersion.
3. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Modelnummer | SRXP62-UVG |
| Højttaler størrelse | 6.5 tommer |
| RMS Power Handling | 125 watt |
| Peak Power Håndtering | 250 watt |
| Følsomhed | 94 dB |
| Monteringsdybde | 2.44 tommer |
| Magnet størrelse | 22 oz |
| Varens vægt | 4.3 pund |

Figur 3.1: Bagside view of the SRX Pro 6.5" speaker, displaying the magnet structure and product identification label.
4. Sikkerhedsoplysninger
Please read all safety instructions carefully before installing and operating your Memphis Audio SRX Pro speaker. Failure to follow these guidelines may result in injury or damage to the product or vehicle.
- Professionel installation anbefales: For optimal ydeevne og sikkerhed anbefales professionel installation udført af en kvalificeret bilstereotekniker.
- Strømhåndtering: Do not exceed the speaker's RMS (125W) or Peak (250W) power ratings to prevent damage.
- Ledningsføring: Ensure correct polarity when connecting the speaker to your amplifier. Incorrect wiring can lead to poor sound quality or damage.
- Montering: Securely mount the speaker to prevent it from becoming a projectile in case of sudden stops or accidents. Ensure adequate clearance for the speaker's depth.
- Høreværn: Langvarig eksponering for høj lydstyrke kan forårsage permanent høreskade. Vær forsigtig, når du justerer lydstyrken.
- Køretøjets elektriske system: Be aware of your vehicle's electrical system when installing. Disconnect the battery's negative terminal before beginning any electrical work.
5. Installationsvejledning
This section provides general guidelines for installing your SRX Pro 6.5" speaker. Specific vehicle requirements may vary.
5.1. Pakkens indhold
- 1 x Memphis Audio SRXP62 6.5" Speaker (Sold Individually)
- Note: Grills are not included with this speaker.
5.2. Nødvendigt værktøj og materialer
- Trådstrippere/pressere
- Skruetrækker eller boremaskine
- Mounting screws (not included)
- Højttalertråd
- Multimeter (optional, for checking polarity)
5.3. Installationstrin
- Afbryd strømmen: Før start skal du frakoble den negative pol på dit køretøjs batteri for at forhindre kortslutninger.
- Vælg monteringssted: Select a suitable location in your vehicle (e.g., door panels, rear deck) that can accommodate the speaker's 6.5" size and 2.44" mounting depth. Ensure there is no interference with window mechanisms or other components.
- Forbered monteringsoverfladen: If replacing existing speakers, remove the old ones. If creating a new opening, carefully cut a hole of the appropriate diameter.
- Ledningsforbindelse: Connect the speaker wires to the terminals on the speaker. The positive (+) terminal is typically marked and should be connected to the positive output of your amplifier, and the negative (-) terminal to the negative output.

Figure 5.1: Speaker terminals, showing connection points for positive and negative wires.
- Monter højttaler: Carefully place the speaker into the mounting hole. Secure it using appropriate screws through the mounting holes on the speaker frame. Do not overtighten.

Figur 5.2: Sideprofile of the speaker, highlighting the mounting flange and overall depth for installation planning.
- Gentilslut batteri: Once the speaker is securely mounted and wired, reconnect the negative terminal of your vehicle's battery.
6. Betjeningsvejledning
The Memphis Audio SRX Pro 6.5" speaker is a passive component and requires an external amplifier for operation. Proper amplifier setup is crucial for optimal sound quality and speaker longevity.
- Amplifier tilslutning: Sørg for din amplifier is properly connected to your head unit and power source.
- Forstærkningsindstilling: Indstil amplifier's gain control correctly. Start with the gain at its minimum, then slowly increase it until you hear distortion, then back off slightly. This ensures the amplifier is not overdriving the speakers.
- Crossover-indstillinger: Hvis din amplifier or head unit has crossover settings, it is recommended to use a high-pass filter (HPF) to protect the speakers from low-frequency signals they are not designed to reproduce. A typical starting point for a 6.5" speaker might be 80-100 Hz.
- Lydstyrkekontrol: Always adjust the system volume from your head unit. Avoid pushing the system to extreme volumes where distortion is audible, as this can damage the speakers.
7. Pleje og vedligeholdelse
Proper care will ensure the longevity and performance of your Memphis Audio SRX Pro speakers.
- Rensning: Use a soft, dry cloth to gently wipe down the speaker cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Beskyttelse: While the speaker is designed for durability, avoid direct exposure to excessive moisture, extreme temperatures, or direct sunlight for prolonged periods.
- Inspektion: Periodically check the speaker for any signs of damage, loose connections, or debris.
8. Fejlfinding
If you experience issues with your SRX Pro speaker, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra højttaleren | Løse eller forkerte ledninger; Amplifier off or in protect mode; Head unit issue; Damaged speaker. | Check all wiring connections for proper polarity and secure fit. Verify amplifier is powered on and not in protect mode. Test with another known-good speaker or audio source. Inspect speaker for visible damage. |
| Forvrænget eller uklar lyd | Amplifier gain set too high; Incorrect crossover settings; Speaker overdriven; Loose mounting. | Reducere amplifier gain. Adjust crossover settings to filter out unwanted frequencies. Lower volume. Ensure speaker is securely mounted. |
| Intermitterende lyd | Løs ledningsforbindelse; Defekt højttalerledning; Ampoverophedning af lieren. | Check and secure all connections. Inspect speaker wire for breaks or shorts. Ensure ampkøleren har tilstrækkelig ventilation. |
9. Garantioplysninger
Memphis Audio provides a 1 års garanti on the SRXP62 speaker from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, abuse, accident, neglect, or unauthorized modification.
For warranty claims, please retain your proof of purchase and contact Memphis Audio customer support or your authorized dealer.
10. Kundesupport
For further assistance, technical support, or inquiries regarding your Memphis Audio SRX Pro speaker, please visit the official Memphis Audio webwebsted eller kontakt deres kundeserviceafdeling.
Memphis Audio Official Webwebsted: www.memphiscaraudio.com
Bemærk: Produktspecifikationer og funktioner kan ændres uden varsel.





